Removing Rubber Covers From Your Asus Monitor Easily

If you're looking to remove the rubber cover from your Asus monitor, you've come to the right place. This process may be necessary if you're looking to install a monitor arm or mount, or if you're simply curious about what's underneath. The process can be straightforward, but it's important to exercise caution to avoid damaging your monitor. In this article, we'll guide you through the steps to safely remove the rubber cover from your Asus monitor.

Using a flathead screwdriver or a pry bar

To remove the rubber cover from an Asus monitor, you will need a flathead screwdriver or a pry bar. This process can be done in a few minutes, but it is important to exercise caution to avoid damaging the monitor.

Firstly, unplug the monitor's power cord and any other cables connected to the monitor. This will ensure that you do not damage the monitor or cause any electrical shocks. Then, lay the monitor face down on a clean, flat surface. This will give you access to the back of the monitor, where the rubber cover is located.

The rubber cover is likely hiding screws that secure the base of the monitor in place. To remove the rubber cover, gently pry it away from the monitor using a flathead screwdriver or a pry bar. Be careful not to use too much force, as you may damage the monitor.

Once the rubber cover is removed, you will be able to see the screws that secure the base of the monitor. Use a screwdriver to remove these screws, and then carefully lift the base off of the monitor. If any cables are stuck, you can use a flathead screwdriver to gently pry them loose.

With a stiff, pointed tool like a metal spudger

To remove the rubber cover from the back of your ASUS monitor, you'll need a stiff, pointed tool like a metal spudger. This tool will help you pry out the plastic covers that are hiding the screws you need to access.

Here's a step-by-step guide on how to do it:

Lay the monitor face down on a smooth, clean surface. This will prevent any damage to the screen during the removal process.

Identify the four rubbery covers that are hiding the screws. These are usually located on the rear of the monitor.

Take your metal spudger and carefully pry out the plastic covers. Insert the spudger between the rubber and the hard plastic, and gently lever it out. Be careful not to apply too much force, as you don't want to damage the surrounding area.

Once all four plastic covers are removed, you should be able to see the screws clearly. Now, use a Philips #1 screwdriver to remove the screws securing the monitor stand.

With the screws removed, you can now detach the stand from the display.

It's important to note that you should always be gentle when performing any kind of disassembly on your monitor. Using excessive force or improper tools can lead to damage, so take your time and work carefully. Additionally, if you're uncomfortable with any part of the process, it's best to consult a professional or seek further guidance.

For screws under rubber pads, use a jeweller's screwdriver

If you need to remove rubber pads or plugs from your ASUS monitor to access screws, you can use a jeweller's screwdriver to pry them out. Place the tip of the screwdriver between the rubber and the hard plastic and apply leverage to pop them out. You can also use an ice pick or a pen for this purpose.

If you are having trouble removing the screws themselves, try using a screwdriver with a slightly larger head. This will give you better leverage and help prevent slipping or stripping. You can also try placing a rubber band over the screw head before inserting your screwdriver. This will help your screwdriver catch the threading more easily.

Pry out plastic covers with a flathead screwdriver

To remove the rubber cover from your ASUS monitor, you can try prying it out with a flathead screwdriver. This method is commonly used for removing plastic screw covers that are slightly above the object's surface. Here is a step-by-step guide to help you through the process:

Step 1: Locate the rubber cover that you want to remove.

Step 2: Place the flathead screwdriver underneath the edge of the rubber cover. Be sure to place it gently to avoid applying too much pressure, as you don't want to damage the surrounding material.

Step 3: Gently pry the rubber cover upwards with the screwdriver. It is important to be careful during this step to avoid damaging the cover or the monitor.

Step 4: Continue prying the cover until it comes loose. You may need to work your way around the edge of the cover, gently prying at different points until it is completely loose.

If the rubber cover is glued down, you may need to use a combination of tools to remove it gently. Some people have had success using tweezers, pliers, or even a pen to pry off glued-on covers. Additionally, if the cover is stuck due to ageing, exposure to heat or moisture, or improper installation, you can apply mild heat with a hairdryer or use penetrating oil like WD-40 to help loosen it.

Unplug the monitor and lay it face down

To begin the process of removing the rubber cover from your Asus monitor, it is important to first unplug the monitor and lay it face down on a smooth, clean, and flat surface. This step is crucial for your safety, ensuring that you do not accidentally damage the monitor or cause any electrical shocks. Additionally, a flat surface will provide a stable foundation for the subsequent steps of the removal process.

When placing the monitor face down, be mindful of choosing a clean and soft area to prevent any scratches or damage to the screen. A soft cloth or towel can be used to create a protective layer between the screen and the surface. This simple precaution will help maintain the integrity of your monitor during the disassembly process.

It is also worth noting that the monitor should be laid flat, avoiding any inclination or uneven positioning. This will ensure stability and prevent accidental slippage or movement during the removal of the rubber cover. By taking the time to prepare your workspace and carefully positioning the monitor, you can create a safe and controlled environment for the task at hand.

Taking these initial steps of unplugging the monitor and laying it face down on a suitable surface will provide a solid foundation for the subsequent stages of removing the rubber cover from your Asus monitor. It is always important to prioritize safety and care when working with electronic devices, and these initial steps help achieve that goal.

Frequently asked questions