ASUS monitors have an aim point feature that places a reticle in the centre of the screen, which some gamers feel gives them an unfair advantage. If you want to turn off this feature, you can do so by pressing the 'X' button on the side or back of your monitor. You can also consult the ASUS FAQ page for more information on how to get the most out of all the features.
Characteristics | Values |
---|---|
Monitor Model | VG248QE, VG248QZ |
GamePlus Features | OSD crosshair, Timer, FPS counter, Display Alignment |
GamePlus Hotkeys | 4 types of crosshair, 5 time intervals |
GamePlus Activation | Press the button to turn on the OSD menu, Open OSD menu -> System Setup -> GamePlus -> ON, Press GamePlus hotkey |
GamePlus Function Selection | Move the 5-way navigation up/down to select function and press to confirm |
What You'll Learn
How to disable the ASUS GamePlus feature
The ASUS GamePlus feature is a tool co-developed with pro-gamers that allows you to practice and improve your gaming skills. It includes features such as an FPS counter, a timer, a crosshair, and display alignment.
To disable ASUS GamePlus, you can try the following methods:
Method 1: Using the "X" Button
On some ASUS monitors, there is an "X" button on the side or back of the monitor. Pressing this button once or twice may turn off the GamePlus feature.
Method 2: Using the On-Screen Display (OSD) Menu
- Press the button to turn on the OSD menu.
- Navigate to the "System Setup" option in the OSD menu.
- Find the "GamePlus" option and turn it off.
Note that the OSD arrangement may vary depending on your monitor model.
Method 3: Performing a Hard Reset
If the above methods do not work, you can try performing a hard reset on your monitor. This involves turning off the monitor, disconnecting the cables, and then holding down the menu button while turning it back on.
Method 4: Disabling in Software
If you are unable to disable GamePlus through the monitor's buttons or menu, you may need to disable it through software. This can be done by downloading the relevant software for your monitor from the ASUS website or by adjusting the settings in the display driver software.
Method 5: Disconnecting the Circuit Board
If all else fails, you can try disconnecting the circuit board for the buttons on your monitor. This will prevent the monitor from turning on the GamePlus feature, but it will also disable the buttons for other functions.
It is recommended to refer to your specific monitor's user manual for detailed instructions on disabling the GamePlus feature, as the steps may vary slightly between models.
Accessing the Boot Drive: ASUS Monitor Guide
You may want to see also
VG248QE monitor's built-in reticle overlay
The ASUS VG248QE monitor features a built-in reticle overlay, also known as the ASUS GamePlus crosshair function. This feature can be activated through the on-screen display (OSD) menu by navigating to System Setup and then selecting GamePlus. Alternatively, you can use the designated GamePlus hotkey on the monitor to enable this feature.
The ASUS GamePlus function provides gamers with a crosshair overlay and a timer, enhancing their gaming experience and allowing them to practice and improve their skills. You can select from four different types of crosshairs and adjust their position on the screen to suit your gaming environment. The timer function helps keep track of spawn and build times in real-time strategy games.
It's important to note that the OSD arrangement and hotkey arrangements may vary across different models of ASUS monitors. Additionally, make sure your graphics card drivers are up to date to activate the 144Hz function in 2D mode when using DisplayPort or Dual-link DVI connections.
Some gamers have expressed concerns about whether using the built-in reticle overlay or crosshair function is considered cheating. However, opinions vary, and some gamers believe that it is not cheating since it is similar to drawing a crosshair on the monitor manually. Ultimately, the decision to use this feature is a matter of personal preference and the specific rules of the game or competition you are participating in.
Setting Up Your ASUS Monitor to 144Hz: A Step-by-Step Guide
You may want to see also
How to remove the crosshair feature
To remove the crosshair feature, also known as the ASUS GamePlus, from your ASUS monitor, follow these steps:
- Press the button to turn on the On-Screen Display (OSD) menu. This button is usually located on the side or back of your monitor.
- Navigate to the OSD menu and open it.
- Go to "System Setup" in the OSD menu.
- Locate "GamePlus" in the "System Setup" menu and turn it off.
- If you want to remove the crosshair immediately while playing a game, you can press the "GamePlus" hotkey on your monitor. The hotkey icon and arrangement vary depending on the model.
By following these steps, you should be able to disable the crosshair feature on your ASUS monitor. Please note that the steps may vary slightly depending on your specific monitor model, so refer to your user manual for model-specific instructions.
Monitoring Asus Router Traffic: A Comprehensive Guide
You may want to see also
How to remove the timer in the top left
To remove the timer in the top left of your ASUS monitor, you will need to disable the GamePlus feature. Here is a step-by-step guide on how to do this:
- Press the button to turn on the On-Screen Display (OSD) menu. This button is usually located on the monitor's side or back.
- Navigate to the OSD menu and open it.
- Go to 'System Setup' in the OSD menu.
- Find 'GamePlus' in the 'System Setup' menu and turn it off.
- If you want to enable GamePlus again in the future, simply repeat these steps and turn it back on.
By following these steps, you should be able to remove the timer from the top left of your ASUS monitor. Please note that the OSD arrangement and hotkey arrangements may vary depending on your monitor model.
Adjusting ASUS Monitor Brightness: A Simple Guide
You may want to see also
How to disable the aim point feature
The ASUS GamePlus feature provides hotkeys that allow you to enable the OSD crosshair, Timer, FPS counter, and Display Alignment functions. To disable the aim point feature, you can try the following methods:
- Check your monitor for an "X" button, which may be on the side or back, and press it to see if that removes the crosshair.
- Refer to the ASUS FAQ page and user manual for detailed instructions on how to manage the GamePlus feature.
- Access the On-Screen Display (OSD) menu by pressing the designated button, usually located on the monitor.
- Within the OSD menu, navigate to System Setup and then "GamePlus." Toggle the setting to the "OFF" position.
- If you have enabled specific GamePlus functions using the hotkeys, press the corresponding hotkey icon on your monitor to disable the function.
Note that the OSD arrangement and hotkey arrangements may vary depending on your ASUS monitor model.
Connecting the Asus R554L to a Monitor: A Step-by-Step Guide
You may want to see also
Frequently asked questions
ASUS's GamePlus feature provides hotkeys that allow you to enable the OSD crosshair. To turn off the aim point feature, you can press the "X" button on the side or back of your monitor.
How do I prevent the aim point feature from putting a reticle on my screen?