Disassembling Lg Flatron 2342: Removing The Monitor Stand

how to remove lg flatron 2342 lcd monitor stand

The LG Flatron 2342 LCD monitor is a popular choice for many people, but what do you do if you want to remove the stand? This can be a tricky process, and there are a few different methods that you can use. One way is to first release the locking knob and then pull the stand base off the monitor. If you want to remove the upper part of the stand that is attached to the monitor itself, you will need to unscrew the rear cover and carefully remove it. You can then remove the screws securing the upper part of the stand. However, be aware that there may be no visible screws, and you may need to find plastic fasteners or clips between the front and rear covers. You can use a flat-head screwdriver to carefully get them apart, but be careful not to damage the monitor.

shundigital

Release the locking knob and pull the stand base off the monitor

To remove the stand from your LG Flatron 2342 LCD monitor, you will need to release the locking knob and then pull the stand base off the monitor. Here is a step-by-step guide:

  • Place the monitor face down on a cushion or soft cloth to protect the screen from scratches or damage.
  • Locate the locking knob. It is usually found at the base of the monitor stand.
  • Change the lock on the product and turn it in the arrow direction. This will release the locking mechanism.
  • If you are unable to release the stand base even with the locking knob in the release position, push the indicated knob down and retry.
  • Once the locking knob is released, pull the stand base off the monitor with a firm and steady motion.

It is important to note that you should be gentle and careful throughout the process to avoid damaging any internal components or cables. Additionally, ensure that you have unplugged the monitor and safely discharged any built-up electricity before beginning the process.

shundigital

Unscrew the rear cover and remove it carefully

To remove the stand from your LG Flatron 2342 LCD monitor, you will need to carefully unscrew and remove the rear cover. This process requires careful attention to detail and a gentle touch to avoid damaging any internal components or cables.

First, locate all the screws securing the rear cover in place. Depending on your model, these screws may be hidden under a plastic cover or flap. If so, carefully pry or pop off the cover to access the screws. Use a screwdriver to gently loosen and remove each screw, being careful not to strip the heads.

Once all the screws are removed, you can carefully lift or pry off the rear cover. Be cautious, as there may be cables or other components attached to the cover. Gently detach any cables or components that are connected to the rear cover. It's important to take note of their original positions for reassembly.

With the rear cover removed, you will have access to the internal components of the monitor. Be mindful not to touch or adjust any parts unnecessarily. Locate the screws or fasteners securing the upper part of the stand to the monitor. Use a screwdriver or appropriate tool to loosen and remove these fasteners.

After removing the fasteners, you should be able to carefully detach the upper part of the stand from the monitor. Ensure that you handle it with care and avoid putting pressure on or bending any sensitive components. Once the stand is removed, you can proceed with carefully replacing the rear cover.

Before securing the rear cover, ensure that all internal parts and cables are in their correct positions. Gently lay the cover back into place, aligning it with the edges of the monitor. Reinsert the screws and tighten them gently to secure the cover. Be careful not to overtighten the screws, as this can strip the threads or damage the plastic.

shundigital

Remove the screws securing the upper part of the stand

To remove the screws securing the upper part of the stand of your LG Flatron 2342 LCD monitor, you will first need to remove the rear cover. Carefully unscrew the rear cover and remove it.

Once the rear cover is removed, you will be able to access the screws securing the upper part of the stand. These screws are typically located near the hinge of the neck that connects the stand to the monitor. Use a Phillips-head screwdriver to remove these screws. Be careful not to apply too much force, as you don't want to strip the screws or damage the internal components.

In some cases, there may be a plastic flap or cover over the screws. If this is the case, use a flat-head screwdriver to carefully pry it open or release it. Make sure you don't apply too much force, as you don't want to damage the plastic. With the plastic flap released, you should be able to access the screws underneath.

After removing the screws, you can carefully lift or pull the upper part of the stand away from the monitor. Be gentle, as there may be cables or other components attached that need to be disconnected before the stand can be completely removed.

Once the stand is removed, make sure to replace the rear cover, ensuring that all internal parts and cables are in their correct positions.

shundigital

Place the monitor face down and pull hard

To remove the stand from your LG Flatron 2342 LCD monitor, place the monitor face down on a flat surface and pull hard. This action will release the stand from the monitor. It is recommended to put the stand back on to give you something to hold while pulling. This method is a viable alternative to prising off the cover and unscrewing the screws underneath it.

When placing the monitor face down, ensure that the screen is protected from scratches or other damage by placing it on a soft surface or cloth. Once the monitor is securely positioned, grip the stand firmly and apply steady, controlled force to remove it from the monitor.

It is important to note that force should be applied carefully to avoid damaging the monitor or stand. If you feel resistance or encounter difficulty, stop and re-evaluate your approach. Inspect the stand and monitor for any signs of damage before proceeding.

Additionally, be mindful of your surroundings and maintain a clear workspace to prevent accidental injury or damage to other objects.

By following these steps, you should be able to successfully remove the stand from your LG Flatron 2342 LCD monitor.

shundigital

Pry the front side of the monitor to release the plastic flap

To pry the front side of the monitor, you will need to first locate the plastic fasteners, which are normally clip-type fasteners between the front and rear covers. You can do this by carefully pulling the rear cover with your fingers to find them.

Once you have located the fasteners, use one or two flat-head screwdrivers to gently prise the front and rear covers apart. Be careful to apply the right force, angle, and position to avoid damaging the monitor.

As you prise the covers apart, be aware that you might not be able to lift off any of the shells immediately. Look out for cables that might be glued or otherwise mounted to the cover, and carefully detach them before fully removing the cover.

Now, you should be able to access the plastic flap on the front side of the monitor and release it by gently prying it away from the monitor.

Frequently asked questions

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment