Removing The Eye Piece: Accessing Your Camera's Evf

how to remove eye piece over evf from camera

The process of removing an eye piece over the EVF from a camera varies depending on the camera model. In some cases, it may be necessary to press in on the sides of the eye piece to release hooks that hold it in place before lifting it up. In other cases, it may be as simple as lifting the eye piece up and off. It is important to refer to the camera's manual for specific instructions. Additionally, some cameras may come with an eyepiece cover attached to the camera strap, which can be used to cover the eye piece when not in use. This can help prevent light from entering the eye piece and affecting the camera's light meter, which can impact exposure settings.

Characteristics Values
How to remove the eyepiece Push up from the bottom, press in on the sides to release the hooks, then slide upwards
How to attach the eyepiece Touch the top of the eyepiece to the viewfinder, then push in the bottom of the eyepiece
Why remove the eyepiece To avoid greasy smudges on the back screen, to prevent light leakage, to avoid getting makeup on the viewfinder sensor, to make it more comfortable for glasses-wearers

shundigital

Removing the Nikon Z7ii eye piece

The Nikon Z7ii is a popular camera, but sometimes you may need to remove its eye piece for cleaning or replacement. Here's a step-by-step guide on how to do it safely and effectively:

Step 1: Understand the Eye Piece

Before you begin, it's important to know that the Nikon Z7ii eye piece is not screwed on like some other camera models. Instead, it is designed to be easily removable. This means you don't need to worry about unscrewing anything.

Step 2: Locate the Eye Piece

The eye piece is located right next to the viewfinder, which is the part you look through to compose and capture your images. It is usually a small, round or oval-shaped cup made of rubber or silicone.

Step 3: Prepare for Removal

Before attempting to remove the eye piece, ensure your camera is turned off and place it on a flat surface. This will reduce the risk of accidentally pressing any buttons or causing damage during the removal process.

Step 4: Grip the Eye Piece

Using your fingers, gently but firmly grip the bottom corners of the eye piece. You may need to apply a little more force than expected, especially if it's your first time removing it.

Step 5: Lift and Remove

While maintaining your grip on the bottom corners, gently lift the eye piece straight up and away from the camera. You should feel a slight resistance, but it should not be difficult to remove.

Step 6: Clean or Replace

Once the eye piece is removed, you can clean it with a soft cloth or replace it with a new one if needed. Be sure to handle it carefully to avoid losing any small parts.

Step 7: Reattach if Needed

If you're reattaching the eye piece, simply align it with the viewfinder and gently push it back into place. You should hear a slight click or feel a snug fit when it's properly secured.

Tips for Reattachment:

  • Be gentle and avoid using excessive force when reattaching.
  • Ensure the eye piece is clean and free of debris before reattaching.
  • If you're not using the camera, consider storing the eye piece separately to prevent it from falling off and getting lost.

By following these steps, you can safely and effectively remove, clean, and reattach the eye piece on your Nikon Z7ii camera. Remember always to handle your camera equipment with care to ensure its longevity.

shundigital

Removing the Canon 7D eye piece

To remove the Canon 7D eye piece, you need to press in on the sides to release the hooks that hold it in place. Then, you can slide it upwards.

Firstly, push the eyepiece up from the bottom quite hard. You may need to apply a bit of force, but be careful not to push too hard.

Then, squeeze the sides of the eyepiece and push upwards to release the hooks. It should then slide off easily.

Some Canon 7D models have a heavier-duty eyepiece, so you will need to press in on the sides to release the hooks. Other models may just require you to hold the sides, press, and lift.

shundigital

Removing the Sony DSC-RX10 eye piece

Removing the Sony DSC-RX10 eyepiece is a simple process. Here is a step-by-step guide:

  • Grasp the eyepiece cup on the left and right sides.
  • Lift up or pull harder to remove the eyepiece cup. It is only held in place by snapping protrusions, so you may need to rock it outwards at the top until a gap appears and then apply more pressure to create a clicking sound as it pops off.
  • If you are having trouble removing the eyepiece cup, try using the very tip of a hook knife or tweezers to gently tweak it loose. Be careful not to press down too hard, as a little tweak should be enough.
  • Once removed, you can attach a replacement eyepiece cup by touching the top of the new eyepiece to the viewfinder and then pushing in the bottom until it snaps into place.

It is recommended to attach the eyepiece cup when you intend to use the viewfinder. Removing the eyepiece cup can also provide more space if you wear glasses and find the original eyepiece uncomfortable.

shundigital

The purpose of the eyepiece

The eyepiece is an important component of a camera, serving multiple purposes. Firstly, it helps to block out external light, allowing you to focus solely on the image in the viewfinder. This is especially useful when shooting outdoors or in bright conditions, as it prevents glare and ensures an optimal viewing experience. The eyepiece also provides comfort for your eye and forehead, thanks to the soft material used in its construction. This reduces the burden on your eye during extended periods of use, making it more pleasant to shoot with your camera.

Additionally, the eyepiece plays a crucial role in dioptric adjustment. By turning or sliding the dioptric adjustment knob or slider, you can adjust the clarity of the viewfinder image to match your unique visual needs. This customisation ensures that you can always view your subject with optimal clarity, regardless of any refractive errors you may have.

Furthermore, the eyepiece can be removed and replaced with alternative options, such as those offered by third-party manufacturers. Some photographers opt for larger eyepieces that wrap around the eye, providing enhanced light blockage and a more immersive viewing experience. Others may seek eyepieces with different shapes or materials to improve comfort or durability. The ability to modify this component gives photographers the flexibility to tailor their camera to their specific needs and preferences.

Lastly, the eyepiece can be a removable component that provides access to the sensor for cleaning or other purposes. In some camera models, removing the eyepiece reveals the sensor, which is crucial for image capture. By having a removable eyepiece, photographers can more easily perform maintenance or address any issues with the sensor.

shundigital

The eyepiece and exposure

The eyepiece is the device you look through when taking a picture. It shows you what is in your frame, along with your settings and other helpful information. In modern cameras, the viewfinder is usually found in the centre of the camera and is often marked by a rubber eyepiece.

The eyepiece can be removed by placing your fingers in the bottom corners and pushing up. However, some people choose to keep the eyepiece on, as it can be useful when gaining proper exposure. Light can travel into the eyepiece as well as out of it, which affects the light meter in your camera and thus your exposure settings. Therefore, it is recommended to cover your eyepiece when your face is not in front of it.

Some people choose to remove the eyepiece because they find it uncomfortable, especially when wearing glasses. Additionally, the eyepiece can fall off when removing or replacing the camera in a bag, and some people simply don't bother to replace it.

If you want to add an eyepiece to your camera, you can buy an eye cup through Amazon or use super glue to attach a rubber eyepiece.

Frequently asked questions

To remove the eye piece from your Nikon Z7II, place your fingers in the bottom corners and push up. It may require a bit more force than expected.

To remove the eye piece from your Canon 7D, press in on the sides to release the hooks that hold it in place, then slide it upwards.

To remove the eye piece from your Sony DSC-RX10, grasp the eye piece on the left and right sides and lift it up.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment