Power Cycling Your Asus Monitor: A Simple Guide

how to power cycle asus monitor

Power cycling is a useful first step to take when you encounter issues with your monitor and are unsure of the root cause. To power cycle your monitor, locate the power supply and disconnect the supply at the monitor or from the wall. Wait for at least 10 seconds before reconnecting the power. If your monitor has been successfully power cycled and rebooted, both the green and blue LEDs on the monitor should light up.

If you own an Asus monitor, you can reset it to its default settings by pressing the button to the left of the power button or the joystick button at the back right of your monitor. Then, select the 'wrench' icon and choose 'all reset'.

If you are still having issues with your Asus monitor, it may be worth trying a new power adapter.

Characteristics Values
Reason for Power Cycling Troubleshooting issues with your monitor
Steps 1. Locate the power supply for your monitor. 2. Remove the power supply by disconnecting it at the monitor or from the wall. 3. Wait at least 10 seconds before reconnecting power.

shundigital

Power cycle an Asus monitor by unplugging it from the wall

To power cycle an Asus monitor by unplugging it from the wall, follow these steps:

  • Turn off the monitor using the power button on the front of the monitor.
  • Unplug the power cord from the wall outlet.
  • Wait for at least 10 seconds. Some sources suggest waiting 30 seconds.
  • Plug the power cord back into the wall outlet.
  • Turn on the monitor.

If you are still experiencing issues with your monitor, you may need to perform a soft reset or a hard reset.

shundigital

Wait at least 10 seconds before plugging it back in

Power cycling your Asus monitor is a good first step to take if you are facing issues with your monitor and are unsure of the root cause. To power cycle your monitor, simply locate the power supply and unplug it from the wall. It is recommended that you wait for at least 10 seconds before plugging it back in and powering it on.

Waiting at least 10 seconds before plugging your monitor back in is important for a few reasons. Firstly, it gives the current flowing through the electrical circuit in the device enough time to dissipate completely. This includes the capacitance throughout the circuit. If this charge hasn't fully dissipated, your device won't be properly reset, and you may risk a charge imbalance, which could be harmful to your device.

Additionally, the 10-second rule is a part of decades-old electronic usage etiquette, which was originally based on the practice of power cycling. Even though advancements have been made, electronics are still fallible and can fail due to overcharging and voltage imbalances. Therefore, it is always a good idea to wait a few seconds after unplugging your device before plugging it back in.

shundigital

A faulty power adapter may be causing the issue

If your ASUS monitor is not turning on, it could be due to a faulty power adapter. Power supply issues are common in ASUS monitors, and a faulty adapter can cause the monitor to not receive a signal or power on.

To troubleshoot this issue, you should first check if the power adapter is properly connected to both the monitor and the power outlet. Ensure that the power outlet is functioning properly by plugging in another device, such as a lamp or hairdryer. If the power outlet is working, and the power adapter is securely connected, try replacing the power adapter with a new one.

If your monitor is still not turning on after replacing the power adapter, you may need to check the power supply unit or the power connection between the monitor and its power source. There could be a loose connection or obstruction that is causing the issue.

If you suspect that the power supply unit is faulty, you may need to replace the entire unit or just the cord that connects it to the monitor.

It is also recommended to power cycle your monitor, which can help resolve issues when you are unsure of the root cause. To power cycle, simply locate the power supply for your monitor and remove the power by disconnecting it at the monitor or from the wall outlet. Wait for at least 10 seconds before reconnecting the power. After a successful power cycle, both the green and blue LEDs on the monitor should light up.

shundigital

Try a different power outlet

If your Asus monitor is not turning on, there are a few things you can try. Firstly, check all the connections to ensure that they are secure. This includes the power cord, as well as any cables connecting your monitor to your computer. If your monitor is plugged into a power strip or surge protector, try plugging it directly into a wall outlet. Sometimes, a faulty power outlet or surge protector can cause issues with power.

If your monitor is still not turning on, try a different power outlet to rule out the possibility of a faulty power outlet. Here's how to do it:

  • Unplug the power cord from the current outlet.
  • Locate a different power outlet that is easily accessible and preferably not a power strip or surge protector.
  • Plug the power cord into the new power outlet.
  • Press the power button on the monitor to turn it on.
  • If your monitor has a power switch at the back, ensure that it is turned on.
  • Check the power cord connection at both the outlet and the monitor end to ensure it is secure.

If your monitor turns on after trying a different power outlet, it is likely that the initial power outlet was faulty. If your monitor still does not turn on, you may need to try other troubleshooting steps, such as trying a different power cord or contacting Asus customer support for further assistance.

shundigital

Try a different power cable

If your Asus monitor is not working, you may need to power cycle it. This is a good first step to take if you are unsure of the root cause of the issue. To power cycle your monitor, locate the power supply, which is connected to the side of the monitor. Then, simply remove the power supply by disconnecting it at the monitor or from the wall outlet. Wait for at least 10 seconds before reconnecting the power. When the monitor is properly power cycled, both the green and blue LEDs on the monitor should light up.

If your monitor still does not work after power cycling, you may need to try a different power cable. Power cables are vital, but they can easily become damaged or broken, which can lead to issues such as fires or equipment damage. To check if your power cable is damaged, first inspect the cord's insulation. If there are any cuts, cracks, or exposed wires, the cord needs to be replaced. Broken insulation and exposed wires can cause the cord to overheat, potentially leading to electrical fires or electrocution.

Another sign that your power cable may be faulty is charring. If you notice any black or brown residue on the cord, it could mean that the insulation has burned away, and the cable will need to be replaced. Fraying is another indicator that your power cable is damaged and needs to be replaced. If the protective sheath around the wire starts to come off, it can cause overheating and create a safety hazard.

Additionally, if your power cable is not performing as it did when it was new, it may be faulty. You can check this by testing the amperage on the cord. If it is not what it used to be, it's time to replace the power cable. You can also use testing tools, such as LAN and PC cable testers, to determine if your power cable is damaged.

Frequently asked questions

To power cycle your Asus monitor, locate the power supply and remove the power by disconnecting the supply at the monitor or from the wall. Wait for at least 10 seconds before reconnecting the power. When the monitor is properly power cycled and rebooted, both the green and blue LEDs on the monitor should light up.

To reset your Asus monitor, you can perform a soft reset or a hard/factory reset. For a soft reset, turn off your monitor using the power button on the front. Then, unplug it from the wall outlet and wait for 30 seconds before plugging it back in and turning it on. For a hard reset, press the joystick button at the back right of your monitor or the button to the left of the power button to open the menu. Then, select the 'wrench' icon and choose 'all reset'.

If your Asus monitor is stuck in a boot loop, try unplugging the power supply for at least 10 seconds and then plugging it back in. If that doesn't work, try replacing the power adapter with a new one that matches the voltage and amperage requirements.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment