Troubleshooting Arcade1up Monitor: Is It Busted?

If you're using your computer and the monitor screen suddenly stops working, it's important to figure out whether it's the computer or the monitor that's causing the issue. Diagnosing what's wrong and fixing it can be a lot more complicated than simply determining if you have a blown monitor or a broken computer. The least technical way to tell if a monitor is blown is to test it with other hardware. The fastest way to rule out your monitor as the source of the problem is to test it on another computer. Disconnect the monitor from your computer and connect it to another properly functioning computer. If the monitor turns on correctly and displays what's supposed to be on the screen, then your monitor is likely not blown and the problem lies elsewhere. If the screen doesn't kick in within a few seconds, try using the working monitor's connection and power cables, connecting only the test monitor to the computer and rebooting the test computer to eliminate every variable other than the monitor. If the monitor still doesn't turn on, it is most likely blown.

Try plugging the monitor into a different computer

If your Arcade1Up monitor suddenly stops working, the least technical way to determine whether it's blown is to test it with other hardware. Testing the monitor on another computer will help rule out one of the devices as the cause of the problem.

To do this, disconnect the monitor from your computer and connect it to another properly functioning computer. Ensure that you're using the same cables that your monitor usually uses. If the monitor turns on correctly and displays what's supposed to be on the screen, you can rule out the monitor as the source of the problem.

If the screen doesn't turn on within a few seconds, try using the working monitor's connection and power cables. Connect only the test monitor to the computer and reboot the computer to eliminate every variable other than the monitor. If the monitor still doesn't turn on, it is most likely blown.

It's important to note that this test will not work for laptops. Additionally, if you're experiencing issues with your monitor, try changing the cable connecting the monitor to ensure that the previous cable wasn't faulty.

Check for physical damage, like cracks or ink marks

To check for physical damage on your Arcade1Up monitor, carefully inspect the screen for any signs of cracks or ink marks. Pay close attention to the details, as hairline cracks or faint ink marks may be difficult to spot at first glance. Ensure you examine the screen from multiple angles and under good lighting conditions to increase your chances of spotting any damage.

Cracks on the screen can vary in appearance, from thin lines to spider-like patterns, and are often accompanied by colour distortion or bleeding. These cracks can be pressure cracks or spider cracks, and they indicate damage to the LCD screen. If you notice any such cracks, it is best to consult a professional for repair or replacement.

Ink marks, on the other hand, can appear as blotches or discolouration on the screen. They may be caused by moisture or impact damage. Like cracks, ink marks can also result in colour distortion or bleeding. If you suspect ink marks, it is advisable to seek expert assistance for proper diagnosis and repair.

In addition to cracks and ink marks, keep an eye out for other types of physical damage, such as scratches, dents, or chips on the screen. Even minor scratches can impact the performance and clarity of your monitor, so it is important to address any signs of physical damage promptly.

If you are unsure whether your Arcade1Up monitor has sustained physical damage, it is recommended to consult a technician for a thorough inspection and diagnosis. They will have the expertise and tools to accurately assess the condition of your monitor and determine if any internal damage has occurred.

If the screen displays an image with lines across it, the monitor is likely broken

To confirm that the issue is with the monitor and not the computer, try testing the monitor on another computer. Disconnect the monitor from your computer and connect it to another properly functioning computer. If the monitor turns on correctly and displays what's supposed to be on the screen, you can rule out the monitor as the source of the problem. If the screen doesn't turn on within a few seconds, try using the working monitor's connection and power cables.

If the monitor still doesn't turn on, it is most likely blown. This test will not work for laptops.

Try swapping out the connection cable

If you're experiencing issues with your Arcade1Up monitor, one troubleshooting step you can take is to try swapping out the connection cable. This can help rule out any problems with the cable itself, such as damage or compatibility issues.

To do this, first power off your Arcade1Up cabinet and unplug the connection cable from both the monitor and the control deck or PCB (printed circuit board). If your cable is difficult to access, refer to your Arcade1Up cabinet's assembly instructions or seek guidance from the official Arcade1Up support channels.

Next, inspect the cable for any signs of damage, such as frayed wiring or broken connectors. If the cable appears damaged, it's best to replace it with an identical or manufacturer-approved substitute. Ensure that the new cable is properly connected at both ends.

If the cable appears undamaged, try using a different cable with the same connections. If you have access to another Arcade1Up cabinet, you can test its cable in your setup. Alternatively, you may be able to find compatible cables online or at electronics stores. When sourcing a new cable, ensure it matches the input and output connections of your monitor and control deck or PCB.

Once the new or alternative cable is connected, power on your Arcade1Up cabinet and observe whether the monitor issue persists. If the problem remains, the cause may lie elsewhere, such as with the power supply or individual components. If the issue is resolved, the original cable was likely faulty or incompatible.

It's important to note that modifying your Arcade1Up cabinet may void its warranty. Always refer to the official troubleshooting steps provided by Arcade1Up before attempting any repairs or modifications.

Try connecting the monitor to a different port on the computer

If you're experiencing issues with your Arcade1Up monitor, it's important to determine whether the problem lies with the monitor itself or the computer it's connected to. One way to do this is by trying a different connection port on the computer. Here are some detailed instructions on how to go about this:

Firstly, if your computer has multiple display ports, try connecting the monitor to a different port. This will help rule out any issues with the specific port you were previously using. If you're able to get the monitor to work by switching ports, then the issue likely lies with the original port rather than the monitor itself.

Additionally, if your computer has a secondary video card, you can try connecting the monitor to that card and removing the primary video card. This will help determine if the issue is related to the primary video card. If the monitor works with the secondary video card, then the problem may lie with the primary card or its connection.

It's also worth noting that laptop computers usually have a video-out port, such as VGA, DVI, or HDMI, which can be used to test the laptop with an external monitor. By connecting your monitor to a different port and/or video card, you can gain valuable information about the source of the problem and narrow down potential solutions.

If you've tried these steps and are still experiencing issues, there could be other factors at play, such as damaged connection ports or problems with the computer's video card. In such cases, it may be necessary to consult a technician for further diagnosis and repair.

Frequently asked questions