Unboxing Your Akaso Camera: Easy Steps To Get Started

how to remove rhe akaso camera from the package

If you've just purchased an AKASO camera, you'll want to get it out of the box and into your hands as soon as possible. The unboxing process is straightforward, but there are a few steps you'll need to follow to safely remove your new camera from its packaging. Firstly, you'll need to remove the camera from the top of the box. The camera is usually secured inside a waterproof case or frame, attached to the box with a mount. Once you've located the camera, you'll need to detach the black mount from the case. With the mount removed, you can now open the case or frame and carefully take out your new AKASO camera.

Characteristics Values
First Step Remove the camera from the top of the box
Second Step Get the black mount off the case
Third Step Open the case/frame

shundigital

Remove the camera from the top of the box

To remove the AKASO camera from its packaging, carefully follow these steps:

First, locate the camera at the top of the box. The new camera comes inside a waterproof case or frame, which is attached to the box with a mount. There are two versions of the mount, so be sure to watch the video in the link provided in the tutorial to safely detach the camera from the box. The black mount glued to the box is only used to keep the camera steady during shipping, so you can confidently remove the camera from the top of the box.

Once you have located the camera, carefully detach it from the mount. Keep in mind that the specific steps to do this may vary slightly depending on the version of the mount. By following the instructions in the video tutorial, you can safely remove the camera from the top of the box without causing any damage.

After detaching the camera from the mount, you can now lift and remove it from the box. Take your time with this step to ensure that you don't accidentally drop or mishandle the camera. Place the camera on a flat, stable surface in front of you, ready for the next steps of the unboxing process.

With the camera now removed from the top of the box, you can proceed to the next step of removing the black mount from the case, as outlined in the unboxing tutorial. Remember to handle your new camera with care and always refer to the official AKASO website or user manual for any further clarification or specific instructions for your camera model.

shundigital

Remove the black mount from the case

To remove the black mount from the case of your new AKASO camera, you must first remove the camera from the top of the box. The camera comes inside a waterproof case or frame, attached to the box with a mount.

The black mount is glued to the box to keep the camera steady during transportation. There are two versions of the mount, so watch the video linked below to see how to remove the camera and case from the box according to your specific model.

To remove the black mount, follow these steps:

  • Remove the rubber stopper from the black clip located just below the front of the camera.
  • Push the two sides of the clip inwards.
  • Slide the clip out like a buckle.

This will detach the black mount from the case, allowing you to separate the two components.

shundigital

Open the case/frame

To open the case/frame of your new AKASO camera, you must first remove it from the top of the box. The camera is housed inside a waterproof case/frame, which is attached to the box with a mount. There are two versions of the mounts, so be sure to watch the video in the link below to identify which version you have. The black mount glued to the box is only used to keep the camera steady during transit and can be safely removed. Once you have removed the camera and mount from the box, you can then carefully open the case/frame to access your new camera.

shundigital

Understand the two versions of the mounts

To remove your AKASO camera from its packaging, you must first remove the camera from the top of the box. Then, you need to remove the black mount from the case, which is glued to the box to keep the camera steady during transit.

Now, onto the two versions of the mounts. The AKASO Outdoor Sports Action Camera Accessories Kit 14 in 1 includes a variety of accessories that can be used with the camera. To understand how to use these accessories, including the mounts, you can refer to the video tutorials provided by AKASO.

The first video link demonstrates how to remove the base under the waterproof case. This is important as the camera comes inside a waterproof case or frame, and you will need to remove the base to access the camera. The second video link shows how to attach the action camera to a helmet, which is likely one of the two versions of the mounts mentioned.

The third video link is specifically about how to take the waterproof case off the black plate on top of the box. This may be relevant if you are having trouble removing the case or want to understand the process in more detail.

By following these video tutorials and understanding the two versions of the mounts, you will be able to successfully remove and utilise your AKASO camera from its packaging.

shundigital

Know that the black mount is glued to the box to keep the camera steady during transit

When unboxing your new AKASO camera, you'll notice that it comes inside a waterproof case or frame, attached to the box with a black mount. This mount is glued to the box to keep the camera steady and secure during transit.

Since the mount is glued to the box, you'll need to carefully detach it to remove the camera from its packaging. Here are some detailed steps to guide you through the process:

  • Locate the glued area: The black mount is typically glued to the box near the top, holding the camera in place.
  • Gently lift the camera: Grasp the camera firmly but gently, and lift it upwards to detach it from the mount. Be careful not to pull too forcefully, as you don't want to accidentally damage the camera or its waterproof case.
  • Check for any remaining adhesive: Once the camera is detached, inspect the area where the mount was glued to ensure no adhesive residue is left behind. If there is, you can carefully remove it with a gentle hand or a tool like a plastic knife or spatula.
  • Clean the camera and case: If necessary, use a soft cloth to wipe down the camera and case, removing any dust or debris that may have accumulated during shipping.
  • Proceed with caution: Remember that the camera and case are delicate pieces of equipment, so handle them with care throughout the unboxing and setup process.

By following these steps, you'll be able to safely remove your AKASO camera from its packaging, even with the black mount glued to the box. Always refer to the official AKASO support website for detailed instructions and video tutorials on unboxing and setting up your new camera.

Frequently asked questions

Removing your AKASO camera from its packaging is simple. First, take the camera out of the box. Next, remove the black mount from the case. Finally, open the case/frame.

The black mount is glued to the box to keep the camera steady during transit.

The case/frame is waterproof and is used to store the camera.

Yes, there are two versions of the mounts. Please watch the video in the link below and follow the instructions according to your mount.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment