Playing Switch On A Monitor: Enhancing Audio Experience

Playing video games on a monitor is a great experience, but what do you do if your monitor has bad speakers? If you're using a Nintendo Switch, there are a few options to get your audio playing. One option is to use a 3.5mm audio wire to connect a pair of speakers to your monitor. If your monitor doesn't have an audio jack, you can plug the speakers directly into the Switch via the 3.5mm headphone jack. Alternatively, you can use Bluetooth speakers or headphones, or an HDMI switch that allows you to switch between audio inputs.

Use a 3.5mm audio wire to connect a pair of speakers to your monitor

If your monitor does not have built-in speakers, you can connect a pair of external speakers using a 3.5mm audio wire. This is a straightforward process, but you will need to ensure you have the right tools and follow the correct steps to connect the speakers successfully.

Firstly, you will need to gather the necessary tools, which include an MP3 player, a 3.5mm wire, and a pair of speakers. It is also recommended to have a hot glue gun, a soldering pen or gun, flux/solder, electrical tape, and a lighter. Once you have all the required tools, you can begin the process of connecting the speakers to your monitor.

The first step is to strip the wire. Using an X-acto knife, carefully cut about an inch under the part of the 3.5mm wire where it splits. Then, gently pull off the casing to expose the inner wires. You may need to use the lighter to burn the tips of the wires to separate them easily. Typically, you will find two sets of wires inside the casing, one with copper and green wires and the other with red and copper wires. Both sets of wires act as connections for the speakers.

Next is the most complex part of the process: connecting the speaker and wire. Cut the wires from the speakers, then take one side of the 3.5mm wire and connect it to the speaker wires. It doesn't matter which colour goes where. Plug the 3.5mm wire into your MP3 player and touch the wires to the speaker until you hear a sound. Once you hear the sound, hold the wires in place and secure them with hot glue.

Finally, you can finish the process by soldering the wires for a more permanent connection. Now you should be able to hear sound through your external speakers connected to your monitor via the 3.5mm audio wire.

Plug your speakers into the headphone jack on the Nintendo Switch

If you want to play your Nintendo Switch on a monitor with bad speakers, one solution is to plug your speakers into the headphone jack on the Nintendo Switch. This is a straightforward process and only requires a 3.5mm audio wire or AUX cord.

First, ensure that your Nintendo Switch is docked and connected to your monitor. The dock should be plugged into a power outlet, and the HDMI cable should be plugged into both the dock and the monitor. Then, turn on the monitor and select the correct input if necessary.

Now, simply plug your speakers into the headphone jack on the Nintendo Switch dock. This is a 3.5mm audio jack, so any standard pair of speakers with a 3.5mm audio cable should work.

If you don't have a spare pair of speakers, you could also use a pair of headphones in the same way. Plug the headphone cord into the headphone jack on the Nintendo Switch dock, and you're ready to go.

This method provides a simple and cost-effective solution for playing your Nintendo Switch on a monitor with bad speakers. It allows you to enjoy your games with clear and crisp audio without having to purchase a new monitor or audio equipment.

It's worth noting that, while docked, the Nintendo Switch can also output audio through the HDMI cable to the monitor's speakers, if your monitor has them. However, if you're looking for a more immersive audio experience or if your monitor doesn't have built-in speakers, plugging your speakers or headphones into the headphone jack on the Nintendo Switch dock is a great option.

Use Bluetooth speakers

If you want to play your Nintendo Switch on a monitor with bad speakers, one option is to use Bluetooth speakers. The Switch does not natively support Bluetooth speakers when docked, so you will need to purchase a Bluetooth transmitter. This transmitter can be connected to your Switch's headphone jack to send audio to your Bluetooth speakers.

There are a few things to keep in mind when using this setup. Firstly, there may be a small degree of latency when using Bluetooth, which can cause a mismatch between the on-screen action and the audio. Additionally, you may encounter some problems when pairing the transmitter with your Bluetooth speakers. The pairing process for Bluetooth is not standardised, so you will need to consult the instructions for your specific devices.

Another option is to use a USB Bluetooth transmitter, which can be plugged into the USB port on the Switch dock. This will allow you to connect your Bluetooth speakers wirelessly without the need for a separate transmitter. However, keep in mind that the Switch does not natively support Bluetooth peripherals, so this may not be a reliable solution.

In conclusion, while it is possible to use Bluetooth speakers with your Nintendo Switch on a monitor with bad speakers, there may be some technical limitations and challenges that you will need to navigate.

Plug your speakers into the headphone jack on your monitor

If your monitor has a headphone jack, you can plug your speakers into it to play audio from your Nintendo Switch. This is a common solution for people who want to play their Switch on a monitor but don't want to use headphones or don't have built-in monitor speakers.

To do this, simply plug a standard 3.5mm audio cable into the headphone jack on your monitor and into the audio input on your speakers. This will allow you to output the sound from your Nintendo Switch to your external speakers.

It's worth noting that some people have reported issues with audio feedback when using the headphone jack while the Switch is docked. If you encounter this issue, there are alternative solutions, such as using an HDMI switch with an audio out port or investing in a separate audio interface for better sound quality and reduced latency.

Additionally, if your monitor has internal speakers that don't produce good sound quality, you can always opt for a Bluetooth speaker or similar wireless audio device. This can be a convenient way to improve your audio experience without dealing with cables.

Use an HDMI switch to alternate between devices

If you want to play your Nintendo Switch on a monitor with bad speakers, one solution is to use an HDMI switch to alternate between devices. This allows you to connect multiple devices, such as a computer or game console, and easily switch between them.

To set this up, you will need an HDMI switch and a few HDMI cables. Ensure that your switch and cables are rated for the resolution and frame rate you intend to display. Power on your HDMI switch and connect its input to the device you want to display, in this case, the Nintendo Switch. Then, connect your monitor to one of the switch's output ports. Make sure your monitor is powered on and set to the HDMI input.

You can repeat this process to connect additional devices to the HDMI switch, such as a PC or another game console. Once everything is connected, you can easily switch between the devices by changing the input on your monitor. This is usually done using the on-screen display or the direct input selection buttons on the monitor.

Using an HDMI switch is a convenient way to manage multiple devices with a single monitor, especially if your monitor only has one HDMI input. However, it's important to note that an HDMI switch will not allow you to have multiple displays active at once. It simply lets you switch between different displays, and you can only use one display at a time with a given device.

Frequently asked questions