Muting Monitor Speakers For Switch Play: A Simple Guide

The Nintendo Switch is a versatile gaming console that can be used with various display setups, including monitors. While the Switch's audio output capabilities are limited, it is possible to configure the audio to play through a monitor or external speakers. This can be achieved through different methods depending on the specific hardware and connections available.

Using an HDMI adapter

If your monitor has an HDMI port, you can use an HDMI adapter to connect your Nintendo Switch to it. Here's a step-by-step guide on how to do this:

First, ensure that your monitor has an HDMI port. Most modern monitors do, but if yours doesn't, you'll need to use a different connection method or consider upgrading to a new monitor.

Next, acquire an HDMI adapter that is compatible with your Nintendo Switch. You can find these adapters online or at electronics stores. The official Nintendo Switch dock has an HDMI output port, so you can use a standard HDMI cable to connect the dock to your monitor.

Now, connect one end of the HDMI cable into the HDMI output port on your Nintendo Switch dock. Then, connect the other end of the HDMI cable to the HDMI input port on your monitor.

If your monitor has built-in speakers, you should now be able to hear the sound from your Nintendo Switch through those speakers. If your monitor doesn't have built-in speakers, you can use the audio jack on the Nintendo Switch to output the sound to external speakers or headphones.

To do this, simply connect your speakers or headphones to the audio jack on the Nintendo Switch while it's docked. This will allow you to hear the sound from the game or application you're running on your Nintendo Switch through your external audio setup.

Additionally, if you're using a PC monitor, you can use an auxiliary cable (aux cord) and a ground loop noise isolator to connect the Nintendo Switch's audio to your PC. Plug one aux cord into the Nintendo Switch and the other into the blue line-in port on your PC. Then, route both cables into the ground loop isolator and enable the line-in connection. This will allow you to hear the Nintendo Switch audio through your PC's speakers or connected audio devices.

By following these steps, you should be able to successfully use an HDMI adapter to connect your Nintendo Switch to a monitor and output the sound through the monitor's speakers or external audio devices.

Connecting to a PC monitor

To connect your Nintendo Switch to a PC monitor, you will need a Nintendo Switch TV Dock with a power supply, a gaming monitor with an HDMI 1.4 connector, and an HDMI 1.4 cable (included in the Nintendo Switch box).

Firstly, connect the Switch Dock to a power source, and then connect the HDMI cable to the dock. Plug the other end of the HDMI cable into the HDMI port of your monitor. Make sure to check whether you are using HDMI 1 or HDMI 2, so you know which source to select on your monitor. Ensure that the HDMI cable is not too tight or trapped behind the monitor, as this can cause damage and result in a bad signal or image loss.

Next, place the Switch into the dock. Turn on the Switch and hold your console so that the + and - buttons are at the top. You will then carefully lower the Switch into the dock until you feel it click. If you have completed these steps correctly, the display of your Switch will move to the monitor. If the image does not appear on your monitor, you may have selected the wrong source.

To select the right source, use the buttons on your monitor to open the OSD (On-Screen Display). Choose the tab that allows you to select an input source, often indicated by a square with an arrow inside. Select the HDMI port into which you plugged the cable.

If you wish to play audio through your PC monitor's speakers, ensure that your monitor has built-in speakers. If it does not, you can plug in external speakers using a 3.5mm aux cable. Alternatively, you can use headphones by plugging them into the headphone jack on the Switch while it is docked.

Using a 3.5mm audio jack

To play sound from a Nintendo Switch through a monitor using a 3.5mm audio jack, you will need to connect the Switch to the monitor using an HDMI cable. The Switch's sound can then be played through the monitor's speakers or, if the monitor has one, a 3.5mm audio output jack.

If your monitor does not have speakers, you can still use a 3.5mm audio jack to play sound from the Switch. You will need to connect the Switch to the monitor using an HDMI cable and then connect the monitor to an amplifier or receiver with an audio input jack using a 3.5mm audio cable. You can then connect your headphones or speakers to the amplifier or receiver.

If your monitor has a 3.5mm audio input jack, you can connect your headphones or speakers to this jack to listen to the sound from the Switch. However, you may need to disable the monitor as a playback device in your audio settings to ensure the sound plays through your headphones or speakers and not the monitor's speakers.

If you want to play sound from the Switch through your PC monitor using a 3.5mm audio jack, you will need two aux cords and a ground loop noise isolator to prevent interference. Plug one aux cord into the Switch and the other into the blue line-in port on your PC. Connect both cables to the ground loop isolator and enable the line-in connection.

If you want to use headphones with your Switch, you can plug them directly into the 3.5mm headphone jack on the console.

Using Bluetooth

The Nintendo Switch does not natively support Bluetooth connections. However, there are some Bluetooth workarounds you can try to connect your Switch audio to a PC monitor.

• One option is to use a Bluetooth adapter like the Genki audio adapter.
• You can also use a PC application like BlueStacks, which enables you to run Android applications on your PC. By downloading the Nintendo Switch Online App on your PC and signing into your Switch account, you can transmit your Switch audio through the same output as your PC monitor.
• Alternatively, you can use a USB headset or Bluetooth headphones to connect directly to your Switch for audio.

Using an aux cable

If your monitor has built-in speakers, you can simply plug your aux cable into the headphone jack on your docked Switch, and then into the audio jack on your monitor. This will allow the sound to play directly from your monitor.

If your monitor does not have built-in speakers, you can still use an aux cable to play sound from your Switch. You will need to connect your aux cable to the headphone jack on your docked Switch, and then connect the other end to a separate speaker setup. This could be a pair of computer speakers or another external speaker setup.

In both cases, the audio jack will work while the Switch is docked, so you won't need to plug in your aux cable every time you dock your console.

It is worth noting that some users have reported experiencing feedback when using the headphone port while docked. If you encounter this issue, there are adapters available that can help resolve this problem.

Additionally, if you are connecting your Switch to a PC monitor and wish to use voice chat, you will need two aux cables and a ground loop noise isolator to prevent interference.

Frequently asked questions