Removing The Base From A Sceptre Monitor: A Step-By-Step Guide

If you want to remove the base from your Sceptre monitor, you'll need to be careful not to damage the screen. It's recommended to lay the monitor face down on a soft towel or cloth on a flat, sturdy surface. Before you begin, disconnect the power supply and any auxiliary cables. Then, depending on your model, you may need to remove plastic covers and/or unscrew neck screws. Finally, use a screwdriver to loosen the screw on the underside of the base and detach it from the monitor stand neck. Some Sceptre monitors have additional screws attaching the stand neck to the back of the display, which will also need to be removed.

Disconnect the power supply and auxiliary cables

To disconnect the power supply and auxiliary cables from your Sceptre monitor, follow these steps:

First, before beginning any disassembly work, it is crucial to ensure that your Sceptre monitor is unplugged from its power supply. This is a basic safety measure to prevent any electrical hazards. Locate the power cable and unplug it from the power outlet or surge protector. Additionally, detach all other cables connected to the monitor, such as HDMI, DVI, or DisplayPort cables.

Now that the monitor is safely unplugged, let's proceed with the disassembly process. Place the monitor screen-side down on a flat, sturdy surface. It is recommended to lay a soft towel or microfiber cloth on the surface to protect the screen from scratches or damage during this process. Ensure that the base of the monitor is off the edge of the table. This positioning will provide you with easy access to the underside of the base and the various cables.

At this point, you can start disconnecting the power supply and auxiliary cables. Identify the cables that are connected to the power supply port and auxiliary ports on the back or sides of the monitor. Gently grip each cable by the connector or plug, not by the cable itself, to avoid damage or strain on the wires. Slowly and carefully pull each cable out of its respective port, ensuring that you are pulling straight out to avoid bending or damaging the connectors.

Some Sceptre monitor models may have cables routed through cable management channels or clips on the back of the monitor. If this is the case, carefully release the cables from these routing paths without applying excessive force. Gently dislodge the cables if they are pressed into the channels or clips, working them free with a gentle back-and-forth motion if necessary. Take your time with this step to avoid damaging the cables or the monitor housing.

Once all the cables are disconnected from the monitor, set them aside in a safe place to ensure they don't interfere with the rest of the disassembly process. You have now successfully disconnected the power supply and auxiliary cables from your Sceptre monitor. Remember to handle the cables with care and avoid sharp bends or stress on the connectors to prevent damage.

Lay the monitor on a flat surface

To remove the base from your Sceptre monitor, you'll need to lay the monitor on a flat surface. This is a crucial step to ensure a safe disassembly process. Here's a detailed guide on how to do it:

First, make sure your work area is clean and flat, providing ample space for the monitor. Place a soft towel or microfiber cloth on the surface. This protective layer will prevent scratches and absorb any impact, reducing the risk of damage to the fragile screen.

Next, carefully lay the Sceptre monitor face down on the towel or cloth. Ensure that the base of the monitor is positioned off the edge of the table. This positioning is important to provide easy access to the base and its screws.

At this point, your monitor should be securely placed on the towel, with the screen protected and the base conveniently accessible for the next steps of the removal process. Remember, always handle the monitor with caution to avoid any accidental damage.

Now that the monitor is properly positioned, you can proceed to the next steps of removing the base. This typically involves unscrewing the base and, in some cases, pressing a hidden tab or button to release the base and the stand neck together.

By laying the monitor on a flat surface in this manner, you create a safe workspace and gain the necessary access to the components for a successful base removal.

Loosen the underside of the monitor's base

To loosen the underside of the monitor's base, you will need a screwdriver. Place the monitor face down on a soft towel or microfiber cloth on a table or flat, sturdy surface. This will protect the screen from scratches or damage while you work.

Now, locate the screw in the middle of the underside of the base. Using your screwdriver, gently turn it in a counter-clockwise direction to loosen and remove it. This will detach the base from the monitor stand neck.

If your monitor has plastic covers, you may need to pry these open with a flat-head screwdriver to access the screw. Be careful not to apply too much force, especially if the covers are made of plastic, as you could damage the casing.

Once the screw is removed, you can lift the base away from the stand neck. This will give you more room to work on removing the stand neck itself.

Press a hidden tab and pull the stand body down

To remove the stand from a Sceptre monitor, you'll need to first disconnect the power supply and any other cables connected to the monitor. Then, lay the monitor face down on a soft towel or cloth on a flat, sturdy surface to protect the screen from scratches.

Now, you're ready to remove the stand. Some Sceptre monitors have two screws attaching the stand neck to the back of the display, so removing the stand is as simple as unscrewing these two screws. However, for other models, you'll need to follow a different process.

At the top of the stand neck, you should find a button or hidden tab in the middle. Insert and press your screwdriver here and pull down gently to remove the neck and the base together. The hidden button or tab can also be located between the monitor body and the display in some Sceptre monitor models. Try to simultaneously press this button (either with your finger or a screwdriver) and firmly pull the body of the stand downwards to remove it. The monitor stand body should slide or pop off. If you experience any difficulty, try holding the monitor with one hand and firmly pulling the neck down with the other. Just be careful not to damage the plastic backing.

If you're still having trouble, you can refer to the Sceptre website to find the manual for your specific monitor model, or call Sceptre's tech support.

Contact Sceptre support for further help

If you are still experiencing difficulties removing the base from your Sceptre monitor after trying the steps outlined in the previous search, you can try contacting Sceptre's customer support team for further assistance.

Sceptre's customer support phone number is 1-800-788-2878. This number can be used to talk to a live company representative and get information about available TVs, monitors, audio appliances, and accessories. You can also address issues with delivery and payments, request a refund or return, get warranty information, and receive technical support.

If you would prefer to contact Sceptre via email, the address for general consumer assistance is SceptreCS@Sceptre.com. For technical assistance, contact the tech team at SceptreTS@Sceptre.com. If you are seeking to get in touch with a sales representative, contact scp-sales@sceptre.com, while the corporate sales department can be reached at corporate_sales@sceptre.com. For marketing inquiries, connect with the corporate marketing team at scp-marketing@sceptre.com.

Sceptre's headquarters is based in California at the following address: 16800 Gale Ave, City of Industry, CA 91745, United States. Their hours of operation are Monday through Friday from 9:00 am to 5:30 pm PST. During the holidays, the schedule may change, so it is recommended to contact the support team beforehand to get updates on the operation hours.

Frequently asked questions