Effective Ways To Remove Libre Glucose Monitors

The FreeStyle Libre continuous glucose monitoring system is a sensor-based system that provides glucose readings day and night without the need for finger pricks. The sensor is small, easy to apply and can be worn comfortably and discreetly on the back of the upper arm for up to 15 days. To remove the FreeStyle Libre 2 or 14-day sensor, slowly peel away the adhesive from your skin in one motion, starting by pulling up the edge. Any remaining adhesive residue can be removed with warm soapy water or isopropyl alcohol.

Pull the edge of the adhesive to remove the sensor

To remove the FreeStyle Libre 2 sensor, start by pulling up the edge of the adhesive that keeps the sensor attached to your skin. It is important to do this slowly and in one motion. Pulling too quickly or aggressively may cause discomfort or irritation to the skin. Pulling slowly and steadily will help to ensure a smooth and controlled removal process.

As you peel away the sensor, be mindful of maintaining a consistent speed and a gentle force. Avoid jerking or tugging motions, as these may cause the adhesive to come away from the sensor prematurely, leaving it stuck on your skin. A steady and controlled motion will help to prevent any discomfort and ensure the sensor is removed efficiently.

Continue peeling the sensor away from your skin until it is completely removed. Once the sensor is off, you may notice some adhesive residue remaining on your skin. This can be easily removed with warm soapy water or isopropyl alcohol. These gentle yet effective methods will help to dissolve or break down the adhesive without irritating your skin.

Proper removal of the FreeStyle Libre 2 sensor is important to ensure your comfort and maintain the condition of your skin. By pulling the edge of the adhesive slowly and steadily, you can effectively remove the sensor and any remaining residue, leaving your skin clean and free of irritation.

Slowly peel away from the skin in one motion

When it's time to remove your FreeStyle Libre 2 or 14-day sensor, you'll need to begin by pulling up the edge of the adhesive that keeps the sensor attached to your skin. This is the first and most important step, as it ensures that you're not accidentally pulling on the sensor itself, which could cause discomfort or damage the device.

Once you have a grip on the adhesive edge, it's time to slowly peel away the sensor from your skin. This should be done in one smooth, gentle motion. Take your time with this step, as pulling too quickly or aggressively could cause skin irritation or discomfort. Imagine you are peeling a sticker off a piece of paper—a steady, gradual peel is best.

As you peel, focus on maintaining a consistent speed and pressure. Avoid stopping and starting, as this could increase the chance of leaving adhesive residue on your skin. Additionally, try to peel at a slight angle, rather than lifting straight up, as this will help ensure that the sensor comes off smoothly.

If you do find that some adhesive residue remains on your skin after removal, don't worry! This can be easily taken care of by gently washing the area with warm, soapy water or by using isopropyl alcohol to dissolve the adhesive.

Remove adhesive residue with warm soapy water or isopropyl alcohol

Removing the remaining adhesive residue from your skin after taking off your glucose monitor is simple. You can use either warm soapy water or isopropyl alcohol to gently remove the glue from your skin.

First, you will need to gather your materials. For the warm soapy water method, you will need a bowl of warm water and a mild soap. For the isopropyl alcohol method, you will need a small amount of isopropyl alcohol and a cotton ball or pad.

If using warm soapy water, start by dipping a washcloth or cotton pad into the soapy water. Gently rub the adhesive area in a circular motion until the residue is gone. Rinse the area with clean water and pat it dry with a towel.

If using isopropyl alcohol, soak a cotton ball or pad with the alcohol. Gently rub the adhesive area in a circular motion until the residue is gone. No need to rinse, but you can pat the area dry with a towel if you like.

Both methods are effective at removing adhesive residue, so choose whichever you are most comfortable with.

Remove the over-bandage if it is loose or falling off

If the over-bandage on your FreeStyle Libre 14-day sensor is loose or falling off, you can add additional bandages or tape. It is important to note that you should not remove bandages or tape until the sensor is ready for removal. The sensor is designed to be worn for 14 days.

If you need to remove the over-bandage, it is important to note that the over-bandage must be applied at the time of sensor application. The opening or hole in the centre of the sensor must not be covered. You can use additional medical-grade bandages or tape, but once applied, do not remove them until the sensor is ready for removal.

If your sensor falls off before the 14-day wear duration, you can complete the online sensor support request form or contact the Customer Care Team.

To remove the sensor, pull up the edge of the adhesive that keeps the sensor attached to your skin. Slowly peel it away from your skin in one motion. You can remove any remaining adhesive residue on the skin with warm soapy water or isopropyl alcohol.

Do not cover the hole in the centre of the sensor with an over-bandage

The FreeStyle Libre glucose monitor is a small sensor-based system that can be worn discreetly on the back of the upper arm. The sensor is painless to apply and can be worn comfortably for up to 15 days. When it's time to remove the sensor, it's important to follow the correct procedure to avoid any issues.

One important thing to remember when using the FreeStyle Libre glucose monitor is not to cover the hole in the centre of the sensor with an over-bandage. The hole in the middle of the sensor needs to remain open to allow any trapped fluid to drain out and dry. Covering the hole with an over-bandage may trap moisture within the sensor, affecting the adhesive's ability to stick to the skin. This could cause the sensor to become loose or fall off before the end of its 14-day or 15-day lifespan.

While it's important not to cover the hole with an over-bandage, clothing is fine to cover the sensor's hole as it does not block moisture from evaporating. It's also worth noting that if an over-bandage is used, it must be applied at the time of sensor application. Once applied, do not remove the over-bandage until the sensor is ready for removal.

To remove the FreeStyle Libre sensor, simply pull up the edge of the adhesive and slowly peel it away from the skin in one motion. Any remaining adhesive residue on the skin can be easily removed with warm soapy water or isopropyl alcohol. It's important to follow these steps carefully to ensure the sensor is removed properly and does not cause any discomfort or damage to the skin.

Frequently asked questions