Choosing The Right Monitor Size For Your Vp Cabinet

When it comes to choosing the right size monitor for your VP cabinet table, there are a few factors to consider. Firstly, the size of your table and cabinet will dictate the maximum monitor size that can be accommodated. Standard cabinets can typically fit monitors ranging from 27 to 42 inches, depending on the specific model and design. It's important to measure the available space to ensure the monitor fits comfortably. Additionally, the type of display you intend to use will influence your decision. While a regular computer monitor or TV can be used, some enthusiasts opt for a more authentic experience by utilizing an actual dot matrix display (DMD) from a pinball machine. This adds to the overall cost but provides a unique visual appeal. It's also worth considering the resolution and viewing angles of the monitor, especially if you plan to view it from different angles or want a more immersive experience. Lastly, the input methods and compatibility of the monitor with your setup should be considered to ensure seamless integration with your cabinet.

The size of the monitor will depend on the size of the cabinet table

For example, if you have a widebody cabinet, you'll need a larger monitor than a standard-sized cabinet. In your case, since you're specifically asking about a VP cabinet, I recommend referring to VP cabinet-building guides or forums for specific recommendations on monitor sizes that are compatible with VP cabinets.

When choosing a monitor for your cabinet table, it's important to consider not only the physical size but also the display quality. A good quality monitor will have a wide viewing angle, low latency, and a thin design. The display should also have the appropriate inputs and outputs to connect to your computer or console. Additionally, you may want to consider the aspect ratio of the monitor to ensure it fits well within the cabinet.

In terms of specific monitor sizes, I found a few examples during my search. One source mentions using a 28-inch Philips computer monitor for their VP cabinet. Another source advertises a mid-size virtual pinball cabinet kit that accommodates a 27-inch playfield monitor and a 19-inch backglass monitor. These sizes seem to be common for VP cabinets, but again, it's important to measure your specific cabinet to ensure the best fit.

It's worth noting that you may need to make adjustments or modifications to the cabinet or monitor to get the perfect fit. For instance, you might need to remove the back panel of the monitor to reduce its thickness or make adjustments to the cabinet's mounting system to accommodate the monitor securely.

A 27-inch monitor is supported by a mid-size cabinet table

The mid-size cabinet table is designed to fit a 27-inch monitor, which is a standard size for many monitors. The table has a wider cabinet to accommodate this size of the monitor, with a cabinet made out of black or white melamine. The cam lock system makes assembly quick and easy, and the table also includes plexiglass and tmolding. The table also comes with a Photoshop template so you can design your own graphics for printing.

The mid-size cabinet table is a great option for those looking for an immersive DIY experience. The table is easy to assemble and can be customised to your own preferences. The table is made from durable materials and has a wider cabinet to accommodate the 27-inch monitor. The cam lock system ensures that assembly is straightforward, and the table also includes plexiglass and tmolding for added convenience.

The mid-size cabinet table is a great option for those looking for a stylish and functional cabinet table. The table is designed to fit a 27-inch monitor, which is a standard size for many monitors. The table has a sleek and modern design, with a black or white finish. The table is also easy to assemble, with a cam lock system that makes the process quick and hassle-free. The mid-size cabinet table is a great option for those looking for a stylish and functional cabinet table that can accommodate a 27-inch monitor.

A 28-inch monitor can be used in a Williams pinball cabinet

When building a virtual pinball cabinet, it is important to consider the size of the monitors that will be used. The playfield monitor should have a short response time (5ms) to avoid time lags and a good viewing angle when physically rotated by 90 degrees in the cabinet. For the backbox, a smaller monitor is typically used, such as a 19-inch or 24-inch monitor.

The standard size of a modern pinball backbox is about 27 inches by 27 inches on the inside. This means that a 28-inch monitor will fit with a little room to spare on the sides. If you are using a wider cabinet, such as a widebody cabinet, you may need to use a larger monitor, such as a 32-inch monitor. However, this will require a custom backbox that is wider than the standard size.

When choosing a monitor for a pinball cabinet, it is also important to consider the type of video connector that will be used. Most modern monitors use HDMI, DisplayPort, or DVI connectors. If you are using an older computer or laptop, you may need to use a VGA connector. In addition, you will need to consider the resolution of the monitor. A 1080p monitor is typically sufficient for most pinball cabinets, but if you are using a 4K playfield monitor, you will need a more powerful computer to run it.

In summary, a 28-inch monitor is a good choice for a Williams pinball cabinet. It will fit within the standard dimensions of the backbox and provide a good viewing experience for the player. Just be sure to consider the other components of your cabinet, such as the computer and video connectors, when making your final decision.

A 42-inch TV can be used in a full-size cabinet

When choosing a cabinet for a 42-inch TV, it is important to consider the dimensions of both the TV and the cabinet. The width, height, and depth of the TV, including any bezels or stands, should be measured to ensure it fits within the cabinet. The depth of a 42-inch TV can range from 6 to 8 inches, while the height can be around 20.59 inches. The cabinet should also have sufficient ventilation to prevent the TV from overheating.

There are a variety of cabinets available in the market that can accommodate a 42-inch TV. These include the Walker Edison Tall Traditional Wood Universal TV Stand, the YITAHOME 42" Deformable TV Stand, and the Sauder Beginnings TV Stand, among others. When choosing a cabinet, consider the material, colour, and additional features such as storage shelves or cabinets.

In terms of the visual experience, a 42-inch TV offers a good balance between size and clarity. Most 42-inch TVs have a resolution of 1080p or 4K, providing clear and sharp images. The higher 4K resolution is ideal for larger screens as it allows viewers to sit closer without noticing pixelation. However, it is important to note that not all content is available in 4K.

The monitor should be thin enough to fit inside the cabinet

When selecting a monitor for your VP cabinet, it's important to consider not only the size but also the thickness of the monitor. The monitor should be thin enough to fit inside the cabinet, allowing for a seamless and sleek installation. Here are some factors to keep in mind:

• Cabinet Size: The dimensions of your VP cabinet will dictate the maximum thickness of the monitor. Measure the depth of your cabinet and choose a monitor that can comfortably fit within that space.
• Mounting Options: Consider how you plan to mount the monitor inside the cabinet. If you opt for a hinged design that allows access to the interior of the cabinet, a thinner monitor will be more suitable.
• Display Technology: Different display technologies can impact the thickness of the monitor. Older-style CRT monitors tend to be bulkier, while modern LCD or LED monitors offer thinner profiles.
• Bezel Size: The bezel, or frame, of the monitor can also affect its overall thickness. Look for monitors with slim bezels to maximize the screen size within your cabinet.
• Customization: If necessary, you can consider modifying the cabinet or the monitor to ensure a proper fit. This may involve cutting or routing channels inside the cabinet to accommodate the monitor.

When selecting a monitor, it's advisable to opt for a thinner design to ensure it can be easily installed within the confines of your VP cabinet. A thin monitor will not only look more aesthetically pleasing but will also help prevent any obstructions or interference with other components. Remember to measure your cabinet dimensions and choose a monitor that suits your specific setup.

Frequently asked questions