Yi Home Camera: Does It Have A Battery?

The YI Dome Camera requires a 5V/1A power supply and can be used with a portable battery. The YI 4K Action Camera can be connected directly to a power source without damaging the camera hardware. However, it is unclear whether the YI Home Camera has a built-in battery or not. One user has noted that they were able to power the camera with a portable battery, but it is not specified whether this is a built-in feature or an external power source.

Using a portable battery to power the Yi Dome Camera

The Yi Dome Camera requires a 5V/1A power supply, which means you can use a portable battery to power the camera. This is ideal if you want to use the camera in a location without access to mains electricity, such as outdoors or in a remote area.

To set up your Yi Dome Camera with a portable battery, first, make sure you have a suitable power bank or portable battery that can output at least 5V/1A of power. You can purchase these batteries from most electronics stores or online retailers. Check the specifications of the battery to ensure it meets the camera's power requirements.

Once you have your portable battery, simply connect the USB cable that came with your Yi Dome Camera to the battery's output port. The other end of the USB cable should be connected to the power input port on the camera. Ensure that the connections are secure and that the camera is properly mounted before turning on the portable battery to power the camera.

Using a portable battery to power your Yi Dome Camera gives you flexibility in where you can place the camera. It is important to note that using a portable battery will reduce the battery life of the power bank, so be sure to keep it charged. Additionally, always follow the manufacturer's guidelines for safely using and maintaining your portable battery.

By utilising a portable battery, you can take advantage of the Yi Dome Camera's features, such as night vision, motion detection, and two-way audio, in locations where traditional power sources may not be readily available. This makes the camera an even more versatile solution for your home security or monitoring needs.

The Yi Dome Camera's power requirements

The Yi Dome Camera requires a 5V/1A power supply. This means that you can use a portable battery to power the camera.

For example, you can use a power bank, such as the Xiaomi Power Bank 2C 20.000mAh, to power the Yi Dome Camera. The power bank can be set to low current output mode, which is designed for small devices such as fitness bands, watches, and Bluetooth headsets.

The Yi Dome Camera can also be powered by a UPS, which converts a 12v battery output to 220v, and then the Yi Home Camera transformer converts from 220v to 5v.

When connected to a power bank and set to record continuously at 1080p @25fps (max quality) with other features such as gesture recognition disabled, the Yi Dome Camera can last for approximately 33 hours.

It is important to note that the camera's power consumption may vary depending on factors such as motion detection and Wi-Fi connection. With motion detection enabled, the camera will only write to the SD card when motion is detected, which may increase autonomy. However, motion detection is a CPU-consuming operation that can impact battery life.

Using a power bank to power the Yi Home Camera 2

The Yi Home Camera 2 can be powered by a portable power bank. The camera requires a 5V/1A power supply and can be used with a portable battery.

Theoretically, if the camera consumes 4 watts for 24 hours, it will use 96Wh of energy. A 20,000mAh power bank at 5V has a capacity of 100Wh. This means that the camera should be able to run for 100/96 hours, or just over 25 hours, if the power bank is fully discharged. However, Li-polymer batteries can usually only be discharged to 80% of their capacity, and the camera does not actually consume 4W all the time.

In practice, the camera consumes an average of 2.4W. This means that the camera should be able to run for 80/60 hours, or 32 hours, on a fully charged 20,000mAh power bank. In reality, when tested, the Yi Home Camera 2 connected to a 20,000mAh power bank and set to record continuously at the highest quality without a Wi-Fi connection lasted for 33 hours and 41 minutes.

With a Wi-Fi connection, the camera may have shorter autonomy as it will be searching for a connection, which consumes power. On the other hand, enabling motion detection may increase autonomy as the camera will not be writing continuously to the SD card.

There are many power banks available in different capacities and sizes. A 16,000mAh power bank, for example, should be enough to charge up to 10 Yi cameras and will be heavier than a smaller capacity power bank. A 10,400mAh power bank may be a better option if you need something that can fit in your pocket.

The Yi Home Camera 2's power requirements

The Yi Home Camera 2 has a power supply of 5V 2.0A, with a maximum power consumption of 4.0W. This means that, theoretically, if the camera consumes 4 watts continuously for 24 hours, it will use 96Wh of energy.

In practice, the camera's power consumption is lower than the maximum. One user tested their camera with a consumption meter for a week and found that it consumed, on average, 2.4W.

The Yi Home Camera 2 can be powered by a portable battery, such as a power bank. One user paired their camera with a Xiaomi Power Bank 2C 20.000mAh, which they set to low current output mode. They then placed the camera in their cottage, recording continuously at 1080p @25fps (max quality) without a Wi-Fi connection. The camera recorded for 33 hours and 41 minutes.

With Wi-Fi connected and motion detection enabled, the camera's autonomy may be increased, as it will not be writing continuously to the SD card. However, motion detection is a CPU-consuming operation, so this may impact battery life.

The Yi Home Camera can also be connected directly to a power source without damaging the camera hardware.

The Yi Dome Camera's heat resistance

The YI Dome Camera is designed for indoor use and can withstand temperatures between 0°C and 50°C. This means that the camera can operate within a broad range of temperatures, from freezing to very hot conditions.

The camera's heat resistance is a testament to its durability and reliability, ensuring that it can maintain functionality in varying environments. This feature is especially important for indoor use, where temperatures can fluctuate due to heating or cooling systems, sunlight exposure, or other factors.

To ensure optimal performance and longevity of the YI Dome Camera, it is recommended to follow the manufacturer's guidelines regarding installation, use, and maintenance. This may include proper ventilation, avoiding direct sunlight, and regular cleaning to prevent dust or debris buildup, which could affect the camera's ability to dissipate heat effectively.

By understanding the heat resistance capabilities of the YI Dome Camera, users can have confidence in the camera's performance and reliability, even in varying temperature conditions within the recommended range.

Frequently asked questions