Charging The Kitmesh Camera: A Quick Guide

The Kitmesh SQ11 HD Motion Camera comes with a USB charging cable. The camera can be charged using the compact power adapter or a computer. To charge the camera, open the digital terminal cover, insert the smaller plug of the interface cable, and then insert the larger plug into the power adapter or a computer's USB terminal. Charging begins when the USB charge lamp lights up and turns off when charging is complete.

Charging the Kitmesh SQ11 camera with a USB cable

The Kitmesh SQ11 camera comes with a USB charging cable. To charge the camera, follow these steps:

• Plug the smaller end of the USB cable into the camera. Ensure that the plug is fully inserted and that the camera is turned off.
• Connect the larger end of the USB cable to a power source. You can use either the included compact power adapter or the USB terminal of a computer.
• If using the power adapter, plug it into a power outlet. Charging will begin, and the USB charge lamp will light up.
• If charging via a computer, ensure that the computer is turned on and has an active internet connection. The camera should start charging once the USB cable is inserted.

Please note that the camera cannot be used for recording while it is charging, and it is recommended to charge the battery on or immediately before the day of use, as charged batteries gradually lose their charge over time. Additionally, do not charge the battery continuously for more than 24 hours to protect its health and maintain optimal performance.

Charging the camera with a compact power adapter

The Kitmesh SQ11 HD Motion Camera comes with a USB charging cable. To charge the camera with a compact power adapter, follow these steps:

• Ensure that the battery is inserted into the camera with the correct polarity. The battery lock should be pressed in the direction of the arrow, and the battery should be pushed in until it clicks into the locked position.
• Open the terminal cover and insert the smaller plug of the interface cable into the camera terminal.
• Connect the larger plug of the interface cable to the compact power adapter.
• Plug the compact power adapter into a power outlet. The compact power adapter can be used with power sources that have 100-240V AC power (50/60 Hz). If the power outlet is in a different format, use a commercially available adapter for the plug. Do not use an electrical transformer designed for travelling, as it may damage the battery.
• Charging will begin, and the USB charge lamp will light up. The lamp will turn off when charging is complete.

Please note that the camera cannot be used while the battery is charging, and it is recommended that the battery is not charged continuously for more than 24 hours to protect its lifespan. Charged batteries gradually lose their charge, so it is best to charge the battery on or immediately before the day of use.

Using a computer to charge the camera

The Kitmesh SQ11 HD Motion Camera comes with a USB charging cable. To charge the camera using a computer, follow these steps:

• Ensure that you have the correct equipment: the camera, a USB charging cable, and a computer with a USB terminal.
• Insert the included battery into the camera, following the correct orientation as indicated by the arrows. The battery should click into place.
• Turn off the camera.
• Open the digital terminal cover and insert the smaller plug of the USB charging cable into the camera terminal.
• Connect the larger plug of the USB charging cable into the USB terminal of your computer.
• Charging will begin automatically, and the USB charge lamp will light up.
• Once the lamp turns off, your camera is fully charged and ready to use!

Please note that you cannot use the camera while it is charging, and it is recommended that you do not charge the battery continuously for more than 24 hours to protect its optimal condition. Additionally, always refer to the operating instructions supplied with your camera for model-specific charging information.

Charging the camera with the supplied AC adapter

To charge the Kitmesh SQ11 HD Motion Camera with the supplied AC adapter, follow these steps:

• Ensure that you have received the correct equipment in your Kitmesh package, including the camera, a USB charging cable, and a clip to attach the camera to objects.
• Locate the USB charging cable and the supplied compact power adapter, which is used for charging via a power outlet.
• Connect the smaller plug of the USB charging cable to the camera, ensuring that it is aligned with the camera's charging port.
• Plug the larger end of the USB charging cable into the compact power adapter.
• Plug the compact power adapter into a power outlet and allow the camera to charge. The charging indicator on the camera should light up, indicating that the charging process has started.
• Keep the camera turned off during the charging process. While charging, you can view images by entering Playback mode, but you cannot capture photos or videos.
• Allow the camera to charge for an optimal duration. Avoid continuously charging the camera for more than 24 hours, as it may affect battery health.
• Once the charging lamp turns off, indicating a full charge, you can safely disconnect the camera and power adapter.

By following these steps, you can ensure that your Kitmesh camera is properly charged and ready for use. Remember to handle the charging process with care and always refer to the official instructions provided by the manufacturer.

Charging the camera with a battery charger

The Kitmesh SQ11 HD Motion Camera comes with a USB charging cable. To charge the camera with a battery charger, follow these steps:

• Insert the battery into the camera, following the correct orientation as indicated by the arrows. Lock the battery into place by sliding the cover and pushing it until you hear a click.
• Connect the smaller plug of the USB charging cable to the camera's charging port. Ensure that the plug is fully inserted and aligned correctly.
• Take the larger plug of the USB cable and connect it to your battery charger. If your charger has a power cord, plug it into the charger before plugging the charger into a power outlet.
• Turn on the battery charger, and the charging process will begin. The camera may have a charge indicator lamp that lights up during charging and turns off when charging is complete.
• It is recommended to charge the battery for no more than 24 hours at a time to maintain optimal battery health. Additionally, fully charge the battery before or on the day of use, as batteries gradually lose their charge over time, even when not in use.

By following these steps, you can effectively charge your Kitmesh camera using a battery charger.

Frequently asked questions