Oil Rig Camera Access: A Comprehensive Guide

how to see oil rig cameras

Oil rig cameras are a feature of the popular survival game Rust, which allows players to monitor and control video feeds from oil rigs and other monuments across the game world. In Rust, survival is the primary objective, and players must use all available methods to protect themselves against enemy raids. Oil rig cameras can be accessed by using a computer station and entering specific codes. This guide will introduce the topic of how to see oil rig cameras in Rust, covering the steps to access and use these cameras effectively.

Characteristics Values
Game Rust
Purpose Monitor areas around monuments on the map
Requirements Computer in base, access codes, power source
Codes OILRIG1L1, OILRIG1L2, OILRIG1L3, OILRIG1L4, OILRIG1DOCK, OILRIG1HELI, OILRIG2L1, OILRIG2L2, OILRIG2L3A, OILRIG2L3B, OILRIG2L4, OILRIG2L5, OILRIG2L6A, OILRIG2L6B, OILRIG2L6C, OILRIG2L6D, OILRIG2DOCK, OILRIG2EXHAUST, OILRIG2HELI

shundigital

How to access oil rig camera footage in Rust

To access oil rig camera footage in Rust, there are a few steps you need to follow. Firstly, it is important to note that the game Rust introduced functional in-game cameras in the Official CCTV Update on March 5, 2020, which allowed players to set up surveillance around their bases and monitor other players and monuments.

To access the oil rig camera footage, you will need to have a computer station set up in your base. This can be crafted or purchased. To craft a computer station, you will need the following items:

  • 5 x High-Quality Metal (HQM) (or 20 HQM according to another source)
  • 1 x Targeting Computer
  • 1 x RF Broadcaster (or 1 Broadcaster according to another source)
  • 1 x RF Receiver (or 1 Receiver according to another source)

These items can be found in various ways:

  • High-Quality Metal: The best way to obtain this is by using a Mining Quarry, as it is nearly impossible to find in rocks via normal mining after a 2017 update.
  • Targeting Computer: This cannot be crafted and must be found by looting helicopter crash sites, loot boxes, and airdrops.
  • RF Broadcaster and RF Receiver: These can be found in crates.

Once you have the required items, take them to a Level 1 or 2 Workbench to craft the computer station.

Now that you have a computer station, you will need to mount it in your base. To do this, look at the terminal while holding the "E" button. The computer station does not require power to operate.

Next, you will need to obtain the correct codes for the oil rig cameras. For the large oil rig, the codes are:

  • OILRIG2L3A
  • OILRIG2L3B
  • OILRIG2L4
  • OILRIG2L5
  • OILRIG2L6A
  • OILRIG2L6B
  • OILRIG2L6C
  • OILRIG2L6D
  • OILRIG2DOCK
  • OILRIG2HELI
  • OILRIG2L1
  • OILRIG2EXHAUST
  • OILRIG2L2

For the small oil rig, the codes are:

  • OILRIGL1
  • OILRIGDOCK
  • OILRIGL2
  • OILRIGL3
  • OILRIGHELI

Type these codes into the computer station by clicking on the “Identifier to Add” tab in the bottom left corner of the main screen. This will bring up a prompt where you can enter the codes.

Once you have entered the correct codes, you will be able to access the oil rig camera footage through your computer station.

It is important to note that the cameras are stationary, so ensure they are facing the desired direction. Additionally, the cameras have a red LED on them, which indicates to your enemies when you are watching the footage.

shundigital

How to get a computer station in Rust

To get a computer station in Rust, you can either buy one or craft it. If you choose to buy one, you can purchase it at the Outpost for 300 scrap.

If you decide to craft it, you will need the following:

  • 5 x High-Quality Metal
  • 1 x Targeting Computer

The two most challenging items to obtain are the Targeting Computer and the High-Quality Metal. The Targeting Computer cannot be crafted and must be found by looting helicopter crash sites, loot boxes, and airdrops. As for the High-Quality Metal, it is almost impossible to find inside rocks through normal mining, and the recommended way to collect it is by using a Mining Quarry.

Once you have obtained the necessary materials, you can build the Computer Station at a level two workbench. It can also be researched for 75 scrap.

After acquiring the Computer Station, you will need to set up an ID to use it. To do this, right-click on the Computer Station and select the "Set ID" command. Choose a secure password that you can remember to prevent unauthorized access to your cameras.

Additionally, ensure you have a power source, such as a wind turbine, small generator, or solar panel, to operate the Computer Station and any connected cameras.

The Computer Station in Rust allows players to monitor live CCTV camera surveillance feeds. Players can access strategically placed CCTV cameras inside monuments, as well as inside and outside player-made bases, by entering the corresponding CCTV camera codes or identifiers.

shundigital

How to set up your own CCTV in Rust

Setting up your own CCTV in Rust can be a challenging but rewarding task, providing an extra layer of surveillance and protection to your base. Here is a step-by-step guide on how to set up your own CCTV system in the game:

Step 1: Acquire the Necessary Items

Before setting up your CCTV system, you will need to gather the required items. These include:

  • A Computer Station: This is a crucial component that allows you to monitor and control your CCTV feeds. You can either buy a Computer Station from the Outpost for 300 scrap or craft your own.
  • Cameras: You will need to obtain CCTV cameras, which can be found in Elite Military Loot Crates, near crash sites, in airdrops, or inside loot crates.
  • Power Source: Ensure you have a reliable power source, such as a Wind Turbine, Small Generator, or Solar Panel, to power your Computer Station and cameras.
  • Other Materials: Gather additional materials like High-Quality Metal, a Targeting Computer, a Broadcaster, and a Receiver. These items are necessary for crafting the Computer Station and can be found in Supply Drops or Hidden Chests near Monument locations.

Step 2: Build the Computer Station

To build your own Computer Station, follow these steps:

  • Gather the required materials: 20 High-Quality Metal, 1 Targeting Computer, 1 Broadcaster, and 1 Receiver.
  • Bring these ingredients to a Level 1 Workbench to craft the Computer Station.
  • Place the Computer Station in a secure location within your base, protected from outside enemies.

Step 3: Create a Unique ID

Before you can use your Computer Station, you must create a unique ID. Right-click on the Computer Station and select the "Set ID" command. This ID will serve as the password for accessing the station, so keep it secure and remember to write it down.

Step 4: Set Up the CCTV Cameras

Now it's time to set up your CCTV cameras:

  • Mount the CCTV cameras in your desired locations around your base, making sure they are facing the areas you wish to monitor.
  • Ensure each camera is connected to a power source providing at least five volts of energy.
  • Adjust the placement and angle of the cameras using a hammer to get the perfect view.

Step 5: Link the Cameras to the Computer Station

The final step is to link each CCTV camera to your Computer Station:

  • Press and hold the "E" button while looking at the camera to bring up the options wheel.
  • Select the "Set Frequency" option and enter a unique, case-sensitive identifier code of up to 32 characters.
  • Click the "Set Identifier" button to save the value.
  • Repeat this process for each camera you wish to link to the Computer Station.
  • Once all the identifiers have been added, you can view their live feeds by clicking on the identifiers in the list on the Computer Station screen.

By following these steps, you will have successfully set up your own CCTV system in Rust, providing you with valuable surveillance and early warning of potential dangers. Remember to keep your IDs secure and regularly change them to prevent unauthorized access to your camera feeds.

shundigital

How to access the CCTV in Rust

To access the CCTV in Rust, players must first build a Computer Station. This requires the following:

  • 20 High-Quality Metal (or 5 in some sources)
  • 1 Targeting Computer
  • 1 Broadcaster
  • 1 Receiver
  • Level 1 Workbench

These can be found in Supply Drops, Hidden Chests, loot crates, loot boxes, airdrops, or helicopter crash sites. Once the Computer Station is built, it must be placed somewhere protected in the player's base.

Next, players must create an ID for the Computer Station by right-clicking on the station and selecting the Set ID command. This ID is the password for the station, so it should be noted down.

Players will also need a power source such as a Wind Turbine, Small Generator, or Solar Panel, which can be found in elite military crates.

Once the Computer Station is set up, players can access the CCTV cameras located at monuments across the map by entering codes. These codes can be found online and include:

  • AIRFIELDGARAGE for the Airfield
  • TOWNWEAPONS and CASINO for the Bandit Camp
  • OILRIG2L3A, OILRIG2L3B, OILRIG2L4, OILRIG2L5, OILRIG2L6A, OILRIG2L6B, OILRIG2L6C, OILRIG2L6D, OILRIG2DOCK, OILRIG2HELI, OILRIG2L1, OILRIG2EXHAUST, and OILRIG2L2 for the Large Oil Rig
  • COMPOUNDCRUDE, COMPOUNDCHILL, COMPOUNDSTREET, and COMPOUNDMUSIC for the Outpost
  • DOMETOP and DOME1 for the Dome
  • OILRIG1L1, OILRIG1L2, OILRIG1L3, OILRIG1L4, OILRIG1DOCK, and OILRIG1HELI for the Oil Rig

The Underwater Lab in Rust also has its own set of camera codes, which can be accessed by gaining entry to the Underwater Lab and finding the CCTV station inside, which is locked with a keycard.

It is important to note that not all servers in Rust have monuments with CCTV cameras accessible through a Computer Station, and some codes may not work for certain maps.

Where is the Camera on LG 65-inch TV?

You may want to see also

shundigital

How to make your own CCTV cameras in Rust

To make your own CCTV cameras in Rust, you must first build a Computer Station to unlock the item hidden around all servers. The blueprint for building a Computer Station is one of the default plans in the game, which requires the following:

  • 20 High-Quality Metal (or 5, according to another source)
  • 1 Targeting Computer
  • 1 RF Broadcaster (or just 'Broadcaster')
  • 1 RF Receiver (or just 'Receiver')

These ingredients can be brought to a Level 1 Workbench to craft the right Station. You can also buy a Computer Station from the Outpost for 300 scrap.

Once you have a Computer Station, you'll need to create an ID by right-clicking on the station and selecting 'Set ID'. Make sure to keep a record of the ID, as it will be needed for anyone to access the station. You'll also need a power source such as a Wind Turbine, Small Generator, or Solar Panel.

Next, you'll need to find CCTV cameras, which can be found in Elite Military Loot Crates, as well as crates, airdrops, and near crash sites. You'll also need to find a few other items:

  • RF Broadcaster
  • RF Receiver
  • Power source with at least 5 volts of energy

Once you have all the necessary materials, you can place the CCTV cameras around your base, making sure to point them toward the area you wish to see. Finally, link the CCTV camera to the Computer Station by entering the ID code.

Frequently asked questions

To see oil rig cameras in Rust, you will need to craft a Computer Station. This requires a Level 2 workbench and the following materials: 5x High-Quality Metal and 1x Targeting Computer. Once you have crafted a Computer Station, you will need to set up an ID and password and connect it to a power source. You can then enter the following codes to access oil rig camera feeds: OILRIG2L1, OILRIG2L3A, OILRIG2L3B, OILRIG2L4, OILRIG2L5, OILRIG2L6A, OILRIG2L6B, OILRIG2L6C, OILRIG2L6D, OILRIG2DOCK, OILRIG2HELI, OILRIG2EXHAUST, OILRIG2L2, OILRIG1L1, OILRIG1L2, OILRIG1L3, OILRIG1L4, and OILRIG1DOCK.

Using oil rig cameras in Rust can provide an extra level of surveillance and help you alert to any dangers in the area. This can be particularly useful when planning to travel to oil rigs as they are high-traffic areas with the best loot.

To get oil rig camera codes in Rust, you will need to craft a Computer Station and enter the correct codes. The codes for oil rig cameras are specific to each server, so not all codes may work for your particular server.

Yes, oil rig cameras in Rust have 150 hp and can be easily removed with pickaxes and other melee weapons.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment