Removing Vivint Cameras: A Step-By-Step Guide For Easy Wall Removal

Removing a Vivint camera from the wall can be necessary for a variety of reasons, such as relocating, renovating, or repositioning the device. While it may seem like a challenging task, with the right tools and guidance, it can be done efficiently and safely. In this article, we will provide a comprehensive overview of the process, ensuring you have the knowledge to detach your Vivint camera without causing damage to the wall or the device itself. So, whether you're moving to a new home or simply want to change the camera's position, read on to learn the proper steps for removal.

How to Remove a Vivint Camera from the Wall

Turn off the camera system

To turn off the Vivint camera system, you must first access the Vivint app on your smartphone or tablet. Navigate to the camera settings within the app and locate the option to power off or disable the camera. Follow the on-screen prompts to power off the camera. This may involve selecting a "Power Off" option or disabling the camera's functionality temporarily. Verify that the camera is no longer operational by checking for any indicator lights or sounds from the device.

If your Vivint outdoor camera is not connected to the Vivint app or if you cannot power it off using the app, refer to the camera's user manual for specific instructions on powering down the device. Ensure that the camera is completely powered off before proceeding with the physical removal to avoid any electrical hazards.

Before removing the camera, it is also important to gather the necessary tools, such as a screwdriver, wire cutters, and electrical tape. Having the right tools on hand will make the task more efficient and help prevent accidental damage.

Disconnect the wiring and power source

Disconnecting the wiring and power source is a crucial step in removing your Vivint camera from the wall. Here is a detailed guide to help you through the process:

Disconnecting the Power Source:

• Before you begin, make sure you have unplugged the system from the power source. Locate the switch and turn it off before gently unplugging the cord.
• It is important to be cautious when handling the power cord to avoid any damage. Ensure that you keep the wires aside carefully to prevent tangling.
• Always be alert for any live wires or direct electricity flow from the circuit. Do not touch or hold any live wires during the process, as it can be extremely dangerous and life-threatening.

Disconnecting the Wiring:

• Open the back panel cover of the camera. You will need a screwdriver for this step.
• Inside the panel, you will find two sets of wires. One set is the power wire that directs the current to the circuit, and the other is for batteries.
• Use a small-sized screwdriver to carefully detach the power wire from the panel.
• If your camera is connected to an ethernet cable, make sure to remove that as well.
• Once all the wires are disconnected, carefully place the panel aside, ensuring that you do not touch any small holes that may be present in the wall.

By following these steps, you will be able to safely disconnect the wiring and power source from your Vivint camera. Remember to always exercise caution when working with electrical components and ensure that you have disabled any alarm systems before beginning the removal process.

Remove the camera cover

To remove the camera cover, start by powering off the camera completely. This is a crucial safety step to prevent any electrical hazards during the removal process. Access the Vivint app on your smartphone or tablet and navigate to the camera settings. From there, locate the option to power off or disable the camera. Follow the on-screen prompts to power off the device.

Once the camera is powered off, it's time to remove the camera cover. The cover is designed to protect the internal components and provide weather resistance. Use a screwdriver or a small pry tool to carefully loosen and remove the screws or release the latches securing the cover in place. These fasteners are typically located around the edges of the camera cover. After removing the screws or latches, carefully lift the camera cover and set it aside in a safe place. Be mindful of any gaskets or seals that may be in place to maintain weather resistance.

With the camera cover removed, take a moment to inspect the interior components. Ensure that the camera lens and sensors are protected from accidental contact. Check for any signs of damage or debris inside the camera housing. This is an important step to ensure that no damage occurs during the removal process.

Now that the camera cover has been successfully removed, you can proceed to the next step of detaching the camera from its mounting plate. This will involve identifying the specific mounting mechanism used and carefully loosening and removing the mounting hardware. Remember to support the camera as you remove the fasteners to prevent it from falling unexpectedly.

By following these detailed steps, you can safely and effectively remove the camera cover of your Vivint outdoor camera, preparing it for further disassembly or adjustments. Remember to exercise caution throughout the process and refer to the camera's user manual for any additional instructions specific to your model.

Remove the mounting bracket

To remove the mounting bracket of your Vivint camera, follow these steps:

Firstly, identify the mounting mechanism used to secure the camera to the mounting plate. This could be screws, a locking collar, or a similar attachment method. Once you have located the mounting screws, use the appropriate tool, such as a screwdriver or wrench, to loosen and remove them. It is important to support the camera while removing the fasteners to prevent it from falling once detached.

After removing the mounting hardware, carefully lift the camera away from the mounting plate, being mindful of any attached wires. Guide these wires through the mounting plate as you detach the camera. Place the camera in a secure location, preferably on a soft surface, to prevent any damage to the exterior or lens.

Now that the camera has been detached, you can proceed to disconnect the wires. Identify the wiring by inspecting the area around the mounting plate. These may include power cables, Ethernet cables, or other connections, depending on your camera setup. If the camera is powered by a wired connection, such as a power adapter or PoE (Power over Ethernet), follow the wiring to the power source and disconnect it. Use caution and, if necessary, use wire cutters to safely remove the electrical connections.

If your camera is connected to a network, such as through an Ethernet cable, carefully disconnect the cable from the camera. Make sure to note any network-related settings or configurations for future reference if the camera is to be reinstalled. Finally, use electrical tape to secure the loose ends of the wires, preventing accidental contact.

With the wires disconnected, the mounting bracket should now be free from the wall. You can fill any holes left by the mounting hardware with a wall patch kit or spackling compound to restore the wall's appearance.

Reassemble the panel

Now that you have successfully removed the Vivint doorbell camera from the wall, you can follow these steps to reassemble the panel:

• Reattach the Front Cover: Place the front cover back onto the panel. Gently push it into place until you hear a click, indicating that it is securely attached.
• Secure with Screw: Retrieve the screw you removed earlier and use your screwdriver to carefully screw the top section of the panel into the wall. Ensure the screw is tight to prevent accidental detachment.
• Protect with Plate: Place the protective plate over the panel. This will shield the panel from dust and accidental contact. The plate should hang neatly on the wall, providing a clean finish.
• Reinstall the System: Once the panel is reassembled, you can now reinstall the Vivint doorbell camera system. Follow the installation instructions provided by Vivint to ensure a secure setup.
• Test the Camera: After reassembling the panel and reinstalling the camera, test the camera to ensure it is functioning properly. Check the video feed, motion detection, and any other features to confirm they are working as expected.
• Maintenance and Care: Regular maintenance will help keep your Vivint doorbell camera in good condition. Refer to the camera's user manual for specific care instructions, and don't hesitate to contact Vivint support for any assistance or queries.

By carefully following these steps, you can efficiently and securely reassemble the Vivint doorbell camera panel. Remember to handle the components with care and ensure all connections are secure before testing the camera.

Frequently asked questions