Dismantling Lg 32 Monitor: Removing The Base Stand

If you want to remove the base from your LG 32 monitor, you've come to the right place. This guide will take you through the process step-by-step, but before you begin, make sure you have a flat-head and a Phillips screwdriver to hand. You'll also need a soft cloth and a low table or box to protect the screen of your monitor.

Steps to Remove Base from LG 32 Monitor

Place a soft cloth on a low table or box to protect the screen

To remove the base from your LG 32 monitor, you'll need to first place a soft cloth on a low table or box. This is to protect the screen from scratches or other damage.

Choose a suitable workspace, such as a low table or box, that is large enough to accommodate the monitor. Then, take a soft cloth, such as a microfiber cloth, and place it on the table or box. Make sure the cloth is large enough to cover the entire screen of the monitor.

Once you have prepared your workspace, carefully place the monitor on the soft cloth with the screen facing down. Ensure that the cloth is smooth and free of any debris or particles that could potentially scratch the screen.

With the monitor securely positioned, you can proceed with the next steps of the disassembly process, which involve unlocking and removing the stand base.

Put the monitor face down on the cloth

To remove the base from your LG 32 monitor, you will need to place the monitor face down on a soft cloth. This is an important step to protect the screen from scratches or other damage. Choose a low table or box and cover it with a soft cloth or towel. Then, carefully lay the monitor on the cloth with the screen facing down. Make sure the surface is stable and secure before proceeding.

Once the monitor is in position, you can start the process of detaching the stand base. First, use a flat-head screwdriver to unscrew the base from the neck of the stand. Be careful not to apply too much force, as you don't want to strip the screws or damage the plastic. After unscrewing the base, you can carefully release the plastic flap covering the hinge of the neck. Do not remove this flap completely yet, as it helps hold the monitor in place.

With the flap released, you can now access the hinge mechanism. Insert the flat-head screwdriver into the notch of the hinge and depress it to release the neck from the monitor. At this point, you can carefully remove the plastic flap. You will now see the screws holding the hinge in place. Use a Phillips-head screwdriver to remove these screws and detach the hinge from the monitor.

By following these steps, you will be able to safely remove the base from your LG 32 monitor without causing any damage to the screen or the casing. Remember to work carefully and patiently, as rushing the process may result in accidental damage to your monitor.

Unscrew the base from the neck with a flat-head screwdriver

To remove the base from an LG 32 monitor, you will need a flat-head screwdriver. This process will involve several steps, but it is important to remain focused and careful throughout to avoid any damage to your monitor.

Firstly, place a soft cloth on a low table or box to protect the screen of the monitor. Then, place the monitor face down on the cloth. This will prevent any accidental scratches or damage to the screen during the process.

Now, locate the point where the base and neck of the monitor are attached. This is where you will need to use your flat-head screwdriver. Insert the screwdriver into the gap between the base and the neck, and gently apply leverage to create a small space. Be careful not to apply too much force, as you may damage the plastic.

With the flat-head screwdriver, gently unscrew the base from the neck. Turn the screwdriver in a counter-clockwise direction to loosen the screw. You may need to apply some force, but be careful not to strip the threads of the screw. Once the screw is loose, continue turning until it is completely removed.

At this point, the base should be detached from the neck. You can now proceed to remove the neck or proceed with mounting the monitor, depending on your specific needs. Remember to keep the screw in a safe place so that you can reassemble the monitor if needed.

By carefully following these steps, you can successfully unscrew and remove the base from your LG 32 monitor.

Release the plastic flap from the monitor where the neck connects

To release the plastic flap from the monitor where the neck connects, you will need a flat-head screwdriver. This is the second step in removing the base from your LG 32-inch monitor, after unscrewing the base from the neck with a flat-head screwdriver.

Carefully release the plastic flap from the monitor where the neck connects. You will not be able to remove it just yet. Insert the flat-head screwdriver into the notch of the hinge of the neck and depress. This will release the neck from the monitor.

Now, you can remove the plastic flap from the monitor. This will expose two screws that you will need to remove to detach the hinge from the monitor.

Depress the notch of the hinge of the neck with a flat-head screwdriver

To remove the base from an LG 32-inch monitor, follow these steps:

Firstly, ensure you have a flat-head screwdriver to hand. Place the monitor face down on a soft cloth to protect the screen. Now, with your flat-head screwdriver, unscrew the base from the neck, from the bottom of the base where they attach.

Next, carefully release the plastic flap from the monitor where the neck connects. You won't be able to remove it just yet. Now, for the step you asked about in detail: take your flat-head screwdriver and insert it into the notch of the hinge of the neck. Depress the notch of the hinge of the neck with the flat-head screwdriver. This action will release the neck from the monitor.

Now you can remove the plastic flap from the monitor. This will expose the screws that attach the hinge to the monitor. Use a Phillips screwdriver to remove these screws and release the hinge from the monitor. Finally, replace the plastic flap. Your monitor can now be mounted cleanly.

This process will require a little force, but be careful not to apply too much, as flat-head screwdrivers are prone to slipping out of screw slots.

Frequently asked questions