The Acer S230HL is a 23-inch LED monitor with a widescreen viewing experience. It is VESA mount compatible, meaning it can be attached to a wall mount or arm using the four threaded holes on the back of the monitor. To do this, you will need a VESA mount adapter bracket, such as the one offered by HumanCentric, which is specifically designed for Acer monitors. This bracket attaches to the original monitor stand and connects to the VESA mount. The installation process is straightforward and can be completed in a few minutes with just a screwdriver.
Characteristics | Values |
---|---|
Display diagonal | 23" |
Built-in speaker(s) | No |
Display brightness (typical) | 250 cd/m² |
Contrast ratio (dynamic) | 100,000,000:1 |
Viewing angle, horizontal | 170° |
Viewing angle, vertical | 160° |
Display number of colors | 16.78 million colors |
Supported graphics resolutions | 1920 x 1080 (HD 1080) |
VGA (D-Sub) ports quantity | 1 |
HDMI ports | 1 |
VESA Compatible (wall mount) | Yes |
What You'll Learn
How to use a VESA mount adapter bracket
The Acer S230HL monitor is VESA mount compatible. VESA mount adapter brackets are used to attach monitors to wall mounts or arms. Here is a step-by-step guide on how to use a VESA mount adapter bracket:
- Prepare the necessary tools: You will need a screwdriver and the appropriate VESA-compatible mounting hardware for your monitor.
- Detach the existing base: Remove the existing base of your monitor by unscrewing it. This will expose the mounting holes on the back of the monitor.
- Attach the VESA adapter bracket: Line up the VESA adapter bracket with the mounting holes on the back of your monitor. Securely attach the bracket using the provided screws. Make sure the bracket is firmly in place.
- Connect to the VESA mount: Once the adapter bracket is attached, you can now connect your monitor to the VESA-compatible wall mount or arm. Follow the instructions provided with your specific mounting solution.
- Ensure weight capacity: It is important to ensure that your monitor mount has a weight capacity that can accommodate the weight of the monitor, the adapter, and the monitor stand.
- Adjust the stabilizer: If your VESA mount adapter bracket comes with a stabilizer bar or similar accessory, adjust it according to the shape of your monitor to minimize any wobbling.
- Secure all connections: Double-check that all connections are tight and secure before finalizing the installation.
- Test the setup: Once everything is in place, test the stability of the monitor by gently trying to move it side to side. Ensure that there is no excessive wobbling or instability.
- Make adjustments as needed: If you notice any issues with the stability or positioning of your monitor, make the necessary adjustments to the VESA mount and adapter bracket.
- Enjoy your mounted monitor: With your Acer S230HL monitor securely mounted, you can now enjoy your setup! Feel free to adjust the screen position, brightness, and other settings as per your preferences.
By following these steps, you can safely and securely mount your Acer S230HL monitor using a VESA mount adapter bracket.
Adjusting Monitor Edges: Calibration Tips for Perfect Screen Alignment
You may want to see also
Where to buy a VESA mount adapter bracket
The Acer S230HL monitor can be mounted on a wall as it is VESA mount compatible. There are four threaded holes arranged in a square pattern on the back of the monitor. To mount the monitor, you will need to use VESA-compatible mounting hardware.
You can purchase a VESA mount adapter bracket for your Acer S230HL monitor from several online retailers, including Amazon, Walmart, and Staples. Here are some options:
HumanCentric VESA Mount Adapter Bracket:
This adapter bracket is specifically designed for Acer monitors and is compatible with the S230HL model. It features easy installation, requiring only a screwdriver. It provides a stable and sturdy platform to mount the neck of your monitor.
VIVO Quick Attach VESA Mount Adapter:
VIVO offers a quick-attach VESA adapter plate that is compatible with various Acer and Viewsonic monitors. While the specific model number is not mentioned, it may be worth checking if it is compatible with the S230HL.
Mount-It! Universal VESA Adapter Mounting Kit:
This universal adapter kit is designed to work with any monitor mount with 75x75 or 100x100mm VESA patterns. It fits displays with bezel heights between 11.5" and 19.2" and screens up to 30" in size. The heavy-duty steel arms and plastic clamps ensure durability and reliability.
Ergotron VESA CPU Mount:
While not a specific adapter bracket, Ergotron offers a VESA CPU mount that may be suitable for your needs. It is a more expensive option, but it could provide a comprehensive solution for mounting your Acer S230HL monitor.
When purchasing a VESA mount adapter bracket, be sure to carefully review the product specifications and compatibility to ensure it will fit your monitor model.
The Oddity of Mismatched Monitor Setups: Sizing Differences
You may want to see also
How to remove the existing base
To remove the existing base from your Acer S230HL monitor, you'll need to follow a few steps. Firstly, make sure you have a screwdriver and a soft cloth or towel to protect your monitor.
Start by unplugging all cables from the monitor, including the power cable, and place the monitor face down on a soft surface. This will give you access to the backside of the monitor and protect the screen.
Now, locate the connection point between the base and the vertical stand. The base is the part that sits on your desk, and the vertical stand is the upright part that connects to the base. You may need to remove the vertical stand first, which is usually attached to the base with a screw. Use your screwdriver to remove this screw and separate the two parts.
Next, focus on the base. Invert the monitor and look for a screw that holds the base in place. Some monitors have a hook that you can rotate anti-clockwise to remove this screw. Once the screw is removed, gently lift the baseplate away from the monitor.
If your monitor has a quick-release button, usually on the backside, you can simply press it and pull the stand away. For some monitors, you may need to remove a square panel to access this button. If there's no button, gently pull the stand away from the monitor while holding the sides, not the screen.
That's it! You've successfully removed the existing base from your Acer S230HL monitor. Now you can attach a VESA mount to enjoy your monitor on a wall or an aftermarket monitor arm.
Monitoring Water Usage: Efficient Daily Tracking Methods
You may want to see also
How to attach the stand neck to the bracket
To attach the stand neck to the bracket, follow these steps:
Firstly, you will need to remove the existing base of your Acer S230HL monitor. This will expose the screws that were previously covered by the base.
Next, take your chosen VESA mount adapter bracket and place it against the back of the monitor, lining up the screw holes. The bracket should have a cut-out section that allows the stand neck to pass through. Ensure the bracket is positioned securely against the monitor, with the stand neck protruding through the cut-out.
Now, take the appropriate screws and fix the bracket to the monitor. You may need to use washers to ensure a tight fit, as some customers have reported that the included screws were not sufficient on their own.
Finally, attach the VESA mount to the bracket. This should slot into the adapter bracket, connecting the monitor to the mount.
Please note that the VESA mount adapter bracket is not included with the monitor and must be purchased separately. It is important to choose a bracket that is compatible with your specific monitor model.
Performance Monitor: Adding Percent Usage Counters Easily
You may want to see also
How to connect the VESA mount
The Acer S230HL monitor is VESA mount compatible. This means that it can be attached to a wall mount or arm using a VESA-compatible mounting kit.
To connect the VESA mount, first, ensure you have the correct VESA mount adapter bracket for your monitor model. The HumanCentric VESA Mount Adapter Bracket is one such option, which is designed to fit the Acer S230HL model.
Next, remove the existing base of your monitor. This may involve unscrewing the monitor from its current stand. Once the base is removed, you can attach the VESA mount adapter bracket in its place. This bracket will provide a platform to connect to the VESA mount.
Now, you can connect the VESA mount itself. Line up the holes on the back of the VESA mount adapter bracket with the holes on the VESA mount and secure them together using the appropriate screws. Ensure that your VESA mount is attached securely to a wall or other stable surface, and confirm that it has a sufficient weight capacity to hold the monitor.
Finally, attach your Acer S230HL monitor to the VESA mount by slotting the mount into the adapter bracket and securing it in place. Your monitor should now be safely attached to the wall.
Please refer to the VESA mount instructions for specific details on how to attach the mount to the wall, as this may vary depending on the model you have. Additionally, always take the necessary safety precautions when mounting heavy objects to walls, and ensure that the fixings are secure before attaching your monitor.
Monitoring Home Electricity Usage: Data Collection Methods
You may want to see also
Frequently asked questions
Yes, the Acer S230HL is VESA mount compatible. It has four threaded holes on the back arranged in a square pattern. Use VESA-compatible mounting hardware to securely attach the monitor to a wall mount or arm.
The only tool required for installation is a screwdriver that fits the screws that came with your VESA mount.
First, remove the existing base of your monitor. Then, attach the VESA mount adapter bracket to the monitor by connecting it to the neck of your monitor. Finally, connect the monitor with the attached bracket to your chosen VESA mount, such as a wall mount or articulating arm.