Connecting Your Wii U To An Hdmi Monitor

how to hook up hdmi monitor to wii u

If you're looking to hook up your Wii U to an HDMI monitor, you're in luck! The Wii U comes with an HDMI cable, which you can plug into your TV or monitor. If your monitor doesn't have an HDMI port, you can use a Wii to HDMI converter, or an HDMI switch with an analog stereo output. You can also use a Wii VGA cable, but this won't provide audio.

Characteristics Values
Required cables HDMI cable, AC adapter, yellow cable, red cable
Wii U placement On a flat surface near the television
TV placement On top of or below the screen
Gamepad setup Charged through an AC adapter or a cradle
Gamepad placement Anywhere near an electrical socket
Gamepad power button Red
Sync buttons On the front of the console and the back of the gamepad

shundigital

Connecting a Wii U to a monitor without HDMI

If your monitor has a VGA input, you can connect your Wii U to it using an RCA-to-VGA breakout cable. This will allow you to connect the Wii U's RCA cable to the VGA input on your monitor. However, you will need to connect the audio to an amp separately.

Alternatively, if your monitor has a DVI input, you can use an HDMI-to-DVI cable. However, you won't get audio using this method, so you would need to connect the audio to an amp or speakers separately.

If your monitor has neither of these inputs, you may need to consider purchasing a new monitor with HDMI input and built-in speakers, or using a different display device.

If you are connecting to a TV instead of a monitor, you can use the Wii's default AV cable (red and white for audio, yellow for video) or an S-Video cable (with red and white audio connectors). If your TV has SCART, RCA-to-SCART adapters are also available.

shundigital

Using a Wii to HDMI converter

  • Purchase a Wii to HDMI converter: There are several brands available on the market, such as PORTHOLIC, Simyoung, Rybozen, and Willstar. These converters are usually affordable and can be found on online stores like Amazon or Walmart.
  • Connect the Wii to the converter: Simply plug the Wii's AV cable into the converter. The Wii's AV cable has RCA connectors, which are color-coded (red and white for audio, yellow for video).
  • Connect the converter to the TV or monitor: Use an HDMI cable to connect the converter to the HDMI input port on your TV or monitor. If your converter has an extra 3.5 mm audio jack, you can connect speakers or headphones for audio output.
  • Power on the devices: Turn on your Wii, TV or monitor, and any external speakers or headphones you may have connected.
  • Select the correct input: Use your TV or monitor remote to select the HDMI input channel. This may be labelled as Input Select, EXT, AUX, AV, or channel 00 or 99.
  • Adjust settings (if needed): On your Wii, go to Settings > Wii Settings > Screen. Set the TV Resolution to EDTV or HDTV (480p) and the Widescreen Settings to Widescreen 16:9.

By following these steps, you should be able to successfully connect your Wii to an HDMI monitor or TV using a Wii to HDMI converter. This will allow you to enjoy your Wii games on a modern display with improved picture and sound quality.

Removing Crayon Marks from LCD Monitors

You may want to see also

shundigital

Connecting a Wii U to a VGA monitor

If you want to connect your Wii U to a VGA monitor, you will need to use an adapter. You can connect your Wii U to a VGA monitor with an RCA to VGA breakout cable. This is particularly useful if you're using the Wii as a PC (the Wii is one of the devices on which you can install Linux).

Here's what you need to do:

  • Connect the cable to the VGA input on the monitor, then to your Wii's RCA cable.
  • Switch on the monitor, and ensure that the input option is set to VGA.

Please note that if your monitor supports HDMI, you can connect your Wii U to it using an HDMI cable. However, you won't be able to use the internal speakers, and you will need to purchase additional adapters or a switch to separate the audio from the HDMI signal.

shundigital

Using a multi-out cable

If your TV does not have an HDMI port, you will need a multi-out cable to connect your Wii U to your monitor. If your TV accepts component cables, you will see three round video ports (red, green, and blue) and two audio ports (red and white). In this case, you can use a component cable. If your TV does not have these ports, look for three A/V ports that are white, red, and yellow. In this case, get a multi-out cable that has these three connectors.

Once you have the appropriate cable, plug the multi-out connector into the Wii U and plug the other connectors into your TV.

If your TV only has a coaxial cable connector, you will need a three-connector multi-out cable plus the appropriate RF modulator. Alternatively, if you have a VCR, you can use its A/V input and coaxial output.

After connecting the Wii U to your TV, place the Wii U sensor bar on top of or below the TV screen. It should be centred in the middle of the screen. Remove the plastic film from the two sticky foam pads on the underside of the sensor and gently press the sensor into place. If you put the sensor on top, make sure the front of it is flush with the front of the TV so that the signal cannot be blocked.

Now, set up your Wii U gamepad. The gamepad can be charged through a gamepad AC adapter or via a cradle. Plug the AC adapter into an electrical socket, then plug the other end into the AC adapter port on the top of the gamepad. If you are using the cradle, plug the AC adapter into the bottom of the cradle and place it on a flat surface. The front of the cradle has a notch that indicates where the home button rests when the gamepad is in place. Note that if your gamepad runs out of power, you can continue playing while the AC adapter is connected.

Finally, turn on the gamepad and follow the on-screen prompts to finish setting up your Wii U. When prompted to sync your console to your gamepad, press the red sync button on the front of the console and the red sync button on the back of the gamepad. You will need to use a pen or something similar to press the gamepad button as it is inset.

shundigital

Setting up the Wii U gamepad

Once charged, the gamepad can be turned on by pressing the red power button. Nintendo will then instruct you step by step to get your Wii U up and running. When prompted, sync your console to your gamepad by pressing the red sync button on the front of the console and the red sync button on the back of the gamepad. The gamepad button is inset, so you may need to use a pen or similar object to press it.

Frequently asked questions

Place the Wii U on a flat surface near the monitor. Plug the AC adapter into an electrical outlet, then plug the yellow cable into the yellow port. Plug the red cable into the red port. Connect the HDMI cable to the HDMI port on the monitor.

If your monitor doesn't have an HDMI port, you can use a multi-out cable. If your TV accepts component cables, use a component cable with three round video ports (red, green, and blue) and two audio ports (red and white). If not, get a multi-out cable with white, red, and yellow connectors.

The gamepad can be charged via a gamepad AC adapter or a cradle. Plug the adapter into an electrical socket, then plug the other end into the AC adapter port on the top of the gamepad. If using a cradle, plug the AC adapter into the bottom of the cradle, then place the cradle on a flat surface.

Press the red power button on the gamepad. Follow the on-screen prompts to finish setting up the console.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment