Minox Camera Chain Removal: A Step-By-Step Guide

how do you remove the chain from a minox camera

The Minox camera is a tiny, index finger-sized camera that has been featured in many films and TV shows. It was created by Latvian photographic dealer Walter Zapp and first produced in 1937. The camera has gone through several iterations since then, with the Riga Minox being the first model. The camera is made of stainless steel and features a Minostigmat 15mm f/3.5 lens. The lens's aperture remains fixed at f/3.5, so shutter speeds alone are used to control exposure.

The camera's chain is used to help measure close camera distances. When attached to the camera, the chain is knotted at distances of 8, 10, 12, and 18 inches. To remove the chain from the camera, insert the D-ring at the end of the chain into the slot of the plug disc and turn the plug one-quarter to the left.

Characteristics Values
Purpose To protect the camera from accidental falls
Insertion The rectangular plug at the end of the chain is inserted into the corresponding chain socket of the camera
Detachment Insert the D-ring at the end of the chain in the manner of a screwdriver, turning the plug one-quarter turn to the left
Length 60cm
Markings Metric and imperial lengths with nodes or notches at 20, 24, 30 and 40 cm

shundigital

The chain is attached to the camera body via a screw thread

To attach the chain, insert the rectangular plug at the end of the chain into the corresponding chain socket of the camera. The spring-loaded dust cover will recede into the camera. Use the D-ring at the end of the chain in the manner of a screwdriver, inserting it into the slot of the plug disc, and turn the plug a quarter to the right.

To detach the chain, reverse these steps. Insert the D-ring into the slot and turn it a quarter to the left—the plug will jump out of the socket.

shundigital

The chain has metal markers at 8, 10, 12 and 18 intervals

The Minox camera is a subminiature camera invented by Walter Zapp in 1936. The camera is known for its small size and macro focusing ability, which made it perfect for covert uses such as surveillance or document copying. The camera was used by both Axis and Allied intelligence agents during World War II and later versions were used well into the 1980s.

The Minox camera comes with an 18-inch (460 mm) measuring chain, which has metal markers at 8, 10, 12 and 18-inch intervals. The chain enables easy copying of letter-sized documents. The markers on the chain correspond with the distances marked on the focus dial of the camera. The entire length of the chain is 60cm.

The chain can be attached directly to the camera body or to the ever-ready case. The method of attachment differs between the A and B camera models and the C, BL and LX models. The chain is attached to the ever-ready case for the C model.

The chain can be used as a neck chord by hooking the ring through the rectangular link near the case. This allows the camera to be carried around the neck, providing extra security when using the camera.

Smart TV Camera: LG 4K Edition

You may want to see also

shundigital

The chain is 24 in total length

The chain on a Minox camera is used to protect the camera against accidental falls. The chain is attached to the camera by inserting the rectangular plug at the end of the chain into the corresponding chain socket. The chain has metal markers on its length that correspond with the distances marked on the focus dial. The entire length of the chain is 60cm, and when shooting at this distance, a standard A4-sized document fits perfectly within the viewfinder's frame.

The chain is available in two types: metric and imperial. The imperial chain is marked at 8", 10", 12", and 18", with the full length being 24". The metric chain has nodes at 20cm, 24cm, 30cm, and 40cm, with the full length also being 60cm.

The chain can be attached directly to the camera or to the ever-ready case. The method of attachment differs between the Minox A and B cameras and the Minox C, BL, and LX models. The chain can also be used as a neck chord by hooking the ring through the rectangular link near the case.

How Did Lelouch Avoid Camera Detection?

You may want to see also

shundigital

The chain can be used as a neck strap

The chain on a Minox camera is a handy feature with multiple uses. Not only does it protect the camera against accidental falls by keeping it securely attached to your person, but it also has measuring beads at 8", 10", 12", and 18" intervals, which help with close-up photography. This is especially useful when taking pictures of small objects or copying documents, as the Minox camera can focus as close as 8 inches.

The chain can be easily attached and detached from the camera body. To attach the chain, insert the rectangular plug at the end of the chain into the corresponding chain socket on the camera. You will know it is secure when you hear a click and the spring-loaded dust cover recedes into the camera. To detach the chain, use the D-ring at the end of the chain as a screwdriver, inserting it into the slot of the plug disc and turning it a quarter to the left, at which point the plug will jump out of the socket.

When taking photographs, the chain can be used as a neck strap, keeping the camera readily accessible and reducing the risk of dropping it. This is particularly useful when taking pictures on the go or in situations where you need to move around freely, such as at a sporting event or while travelling.

The chain's measuring beads also ensure that you set the correct distance on the camera's distance scale for extreme close-ups, guaranteeing sharp and focused images. Simply set the distance on the camera to match the distance indicated by the measuring beads on the chain.

In addition to its functional purposes, the chain also adds a stylish touch to the Minox camera, enhancing its sleek and elegant design. Overall, the chain is a versatile accessory that not only improves the camera's functionality but also adds to its aesthetic appeal.

shundigital

The chain can be attached to the ever-ready case

The chain on a Minox camera is attached to the ever-ready case via a rectangular plug. The chain is inserted into a corresponding chain socket on the camera. The chain is secured by a spring-loaded dust cover, which recedes into the camera when the chain is attached. To detach the chain, a D-ring at the end of the chain is inserted into the slot of the plug disc and turned a quarter to the left. This will cause the plug to jump out of the socket.

The chain is an important accessory for the Minox camera. It helps to protect the camera against accidental falls and also aids in measuring close distances. The chain is equipped with beads at 8", 10", 12", and 18" to help with focusing. The chain can be locked into the camera socket, with the chain held taut and at a right angle from the camera to the subject. This ensures that the beads are placed at the correct distance markers.

The chain is also useful for taking close-up pictures. The Minox camera can focus as close as 8 inches, and the chain helps to ensure that the distance is set accurately. This is important because, at close range, the zone of sharpness is very limited.

The chain can also be used in conjunction with other accessories. For example, the Minox camera can be attached to a tripod or flash bracket via a camera clamp. The chain can be secured to the camera clamp, which has a socket for a cable release. This setup is ideal for longer exposures and helps to ensure steady shots.

Overall, the chain is a versatile accessory for the Minox camera, providing protection, aiding in focusing and close-up photography, and working in tandem with other accessories. Its attachment to the ever-ready case is secure and can be easily detached when needed.

Frequently asked questions

The chain attachment on the Minox camera is used to help measure close camera distances. To remove the chain, you must first detach it from the camera body. Insert a D-ring at the end of the chain into the slot of the plug disc and turn it one-quarter to the left. This will cause the plug to jump out of the socket.

To reattach the chain, insert the rectangular plug at the end of the chain into the corresponding chain socket of the camera. The spring-loaded dust cover will recede into the camera. Use the D-ring at the end of the chain in the manner of a screwdriver, inserting it into the slot of the plug disc, and turn the plug one-quarter to the right.

The chain on the Minox camera has small beads that correspond to the close- distance settings engraved on the distance scale. With the chain locked in the camera socket, held taut, and at a right angle from the camera to the subject, the beads are placed at 8, 10, 12, and 18 inches; the full length of the chain is 24 inches.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment