Removing Volvo Truck Ldws Camera: A Step-By-Step Guide

Volvo Trucks has introduced a comprehensive collision mitigation system called Volvo Active Driver Assist, which combines radar and camera capabilities to provide emergency braking and help drivers maintain a safe following distance through alerts and interventions. As a result of the camera, Volvo now offers an integrated Lane Departure Warning System (LDWS) with Data Capture capability, which alerts drivers when an unintentional lane change occurs. This system uses a camera to track road markings and sound an alarm when drivers depart from their lane without signalling. This article will provide a step-by-step guide on how to remove the LDWS camera from a Volvo truck.

Removing the camera from the windshield

To remove the camera from the windshield of a Volvo truck, follow these steps:

Firstly, it is important to note that the camera is part of the Volvo Active Driver Assist system, which is fully integrated into the truck's Driver Information Display. This means that removing the camera will impact the functionality of this system, including the Lane Departure Warning System (LDWS) and forward-collision warning.

Now, to remove the camera:

• Park the truck in a safe and well-lit area, and put on the necessary safety gear, such as gloves and eye protection.
• Locate the camera on the windshield. It is usually mounted behind the windshield, integrated beside the rearview mirror.
• Disconnect the camera from the display and any other connected components. This may involve carefully prying or unscrewing any mounting brackets or adhesive holding the camera in place.
• Once the camera is disconnected, carefully remove it from the windshield, being mindful of any cables or wires that may still be attached.
• If necessary, use a plastic tool to gently remove any remaining adhesive or residue from the windshield. Do not use metal tools, as these could damage the glass.
• Store the camera and any removed components safely, and ensure that you dispose of any waste appropriately.

Remember, removing the camera will impact the functionality of the Volvo Active Driver Assist system. Always refer to the truck's manual or seek professional assistance if you are unsure about any part of this process.

Disconnecting the camera's wiring

Before starting, ensure you have the necessary tools, such as a screwdriver and wire clip. It is also important to wear protective gear, like gloves, to avoid any potential electrical hazards.

First, locate the camera's wiring harness. This is usually found near the camera itself, which is typically mounted on the windshield of the truck. Once you have located the wiring harness, you will need to identify the specific wires that need to be disconnected. These wires are often colour-coded, so refer to the Volvo truck's wiring diagram to identify the correct wires for the LDWS camera.

Next, carefully disconnect the wires. There are a few different methods to do this, depending on the connector type. One common method is to locate and depress a small tab or clip on the connector. By pressing this tab, you can release the connector and gently pull the wires apart. Another method involves depressing the longer side of a wire clip that runs along the connector. While pressing this side, pull the plug away from its socket. The wire clip will snap back into place when you reconnect the wires.

In some cases, you may need to remove a wire harness retainer to access the wires. This can be done by carefully prying it open with a flat-head screwdriver. Remember to note the orientation of the retainer to ensure proper installation when reassembling.

Always handle the wires with care to avoid damage. If necessary, label the wires to ensure proper reconnection during reassembly. Once the wires are disconnected, gently tuck them away from the camera to prevent any accidental reconnections.

Finally, refer to the Volvo truck's manual or seek guidance from a certified mechanic if you encounter any issues or have any concerns during the disconnection process.

Replacing the LDWS camera with a standard one

The Lane Departure Warning System (LDWS) is part of Volvo's Active Driver Assist (VADA) system, which combines radar and camera capabilities to help prevent collisions. The LDWS camera is windshield-mounted and is used to track road markings and alert the driver if the truck begins to drift.

To replace the LDWS camera with a standard one, follow these steps:

Step 1: Disconnect the Camera

• Park the truck on level ground and engage the parking brake.
• Locate the LDWS camera, which is usually mounted on the windshield, near or integrated with the rearview mirror.
• Carefully detach any cables or connectors attached to the camera. This may require unscrewing some fasteners or clips.
• Gently remove the camera from its mounting bracket or adhesive.

Step 2: Prepare the New Camera

• Obtain a new standard camera that is compatible with your Volvo truck's VADA system. Ensure it has the correct connectors and mounting hardware.
• If the new camera uses adhesive to mount, clean the windshield glass with a glass cleaner and a soft cloth to ensure a strong bond.

Step 3: Install the New Camera

• Position the new camera on the windshield, following the alignment guidelines provided by Volvo or a certified technician.
• Secure the camera in place using the appropriate mounting hardware or adhesive.
• Reconnect any cables or connectors to the new camera, ensuring they are securely attached.

Step 4: Calibration and Testing

• Once the new camera is installed, calibrate it according to Volvo's specifications. This may involve adjusting the camera angle and testing its functionality.
• Test the LDWS system by driving the truck on a straight road and intentionally drifting towards the lane markings. The LDWS should activate and provide audio and visual alerts.

Step 5: Post-Installation Checks

• After installing and calibrating the new camera, perform a thorough test drive to ensure the LDWS system is functioning correctly.
• Check for any error messages or unusual behavior related to the camera or LDWS system.
• If any issues arise, recheck the camera's connections and mounting, and consult a Volvo technician if problems persist.

By following these steps, you can replace the LDWS camera with a standard one, ensuring the continued functionality of Volvo's Active Driver Assist system and maintaining the safety features of your truck.

Disabling the LDWS system in the truck's settings

Understanding the LDWS:

The Lane Departure Warning System (LDWS) is designed to warn the driver when the truck unintentionally deviates from its lane. This system uses camera and radar technology to monitor the truck's position and provide alerts to help prevent accidents caused by driver error, distractions, or drowsiness.

Locating the Settings:

To disable the LDWS, you will need to access the truck's settings. This can vary depending on the specific model of the Volvo truck, but it is usually accessible through the Driver Information Display or a similar system. Refer to your truck's manual to locate the settings.

Disabling the LDWS:

Once you have accessed the settings, look for the "Safety" or "Driver Assistance" section. Within this section, you should find the option to disable the LDWS. Keep in mind that on some models, the LDWS can only be deactivated for a limited period, such as 15 minutes, after which it will automatically reactivate for safety reasons.

Manual Reactivation:

If you choose to disable the LDWS, remember that you can manually reactivate it at any time. This is important to ensure that you have the benefit of this safety feature when needed. The system will also automatically reactivate after a certain period or when certain driving conditions are met.

Considerations:

While disabling the LDWS may be necessary in certain situations, such as construction zones or narrow roads, it is important to use this feature judiciously. The LDWS is designed to enhance your safety on the road, and Volvo recommends keeping it active whenever possible. Always refer to the official Volvo guidelines and your local regulations regarding the use of driver assistance systems.

Reinstalling the side mirrors

Step 1: Purchase the Correct Mirror

Ensure that you have purchased the correct side mirror for your Volvo truck model. You can refer to the owner's manual or consult a Volvo dealer to determine the exact mirror model for your truck.

Step 2: Gather Tools and Materials

Before you begin the reinstallation process, gather all the necessary tools and materials, including a new side mirror, a screwdriver, and any other relevant tools.

Step 3: Remove the Old Mirror

Carefully remove the old side mirror from your Volvo truck. This may involve unscrewing the mirror from the door or adjusting the mirror's housing to access the screws. Be gentle to avoid damaging the door or any surrounding components.

Step 4: Clean the Mirror Housing

With the old mirror removed, take the opportunity to clean the mirror housing and the surrounding area. Use a soft cloth to wipe away any dirt, dust, or debris that has accumulated. Ensure that the area is clean and dry before proceeding.

Step 5: Prepare the New Mirror

Inspect the new side mirror to ensure it is in good condition and functions properly. Adjust the mirror angle and ensure that features such as heating and power adjustment are operational, if applicable.

Step 6: Install the New Mirror

Carefully align the new side mirror with the mounting points on the door. Securely attach the mirror using the appropriate screws. Ensure that the mirror is firmly in place and all screws are tightened.

Step 7: Test the Mirror Functionality

Once the new side mirror is installed, test its functionality. Adjust the mirror angle using the built-in controls, ensure that the heating function works (if applicable), and test the turn signal lights (if integrated).

Step 8: Final Inspection

Perform a final inspection to ensure that the side mirror is securely attached and functions correctly. Check for any loose screws, and ensure that the mirror glass is clean and provides a clear view.

By following these steps, you can effectively reinstall the side mirrors on your Volvo truck, ensuring optimal visibility and safety while driving.

Frequently asked questions