Removing The Vivint Outdoor Camera Pro: A Step-By-Step Guide

how to remove vivint outdoor camera pro

The Vivint Outdoor Camera Pro is a security device that needs to be connected to your home's power source. Due to this, it is recommended that you get an installation technician to remove the camera for you. However, if you would like to attempt to remove the camera yourself, you must first turn off the power to the camera at your home's breaker box. You should then take a photo of the wiring and remove the wires from their screws, keeping the ends away from any metal. Next, you should remove the backplate and pull the wires through the centre holes, before unscrewing and removing the camera.

Characteristics Values
Step 1 Disable the Vivint smart home system
Step 2 Unplug the system from the power source
Step 3 Remove the panel cover
Step 4 Remove wires from the panel
Step 5 Remove power wires
Step 6 Reassemble your panel

shundigital

Disabling the Vivint smart home system

To disable the system, you must use the Vivint smartphone application. Double-check the settings and inform family members about the task to avoid confusion. Once you are done with disconnecting, you can move on to the next step.

The next step is to unplug the system from its power source. It is important to switch off the button before removing the plug and to keep all wires aside to avoid tangling. Be extremely cautious when handling the electric board and live wires, as it can be life-threatening.

After disconnecting the system from the power source, use a screwdriver to reach the doorbell alarm system. You can use a tester, which looks like a screwdriver, to check for any direct current to the circuit. If everything looks okay, move on to removing the screw at the top of the panel. The panel is attached to the circuit with two tabs mounted on the top. Gently push the tab, pull the cover out and down, and hang the panel cover on the backplate.

You can now remove the wires from the panel. There will be two sets of wires inside: one is a power wire, and the other is for batteries. Use a small screwdriver to gently remove the power wire. If your panel is connected to an ethernet cable, be sure to remove this as well.

shundigital

Unplugging the system from the power source

Unplugging the Vivint Outdoor Camera Pro from its power source is an important step in the removal process. Before you begin, ensure you have the right tools, such as a Philips screwdriver, and safety equipment, such as gloves, to protect you from electric shock.

First, switch off the power button to the camera system. It is crucial to do this before unplugging to avoid any risk of electric shock or damage to the system. Once the power button is off, gently unplug the power source. It is important to keep the wires organised and untangled, placing them to the side, as you will need to access them later.

At this stage, you must be cautious of live wires and direct electricity flow from the circuit. Do not touch or hold any live wires during the process as this could be life-threatening. The electricity could cause a fire or result in serious injury.

After unplugging the system, you can move on to the next step of removing the panel cover. Using your Philips screwdriver, remove the screw at the top of the panel. The panel is attached to the circuit by two tabs mounted at the top. Gently push the tabs and pull the cover out and down, hanging it on the backplate. You may hear a beeping sound at this point, which is the system indicating that the cover has been opened. This sound will last for a few minutes. Place the panel in a safe location to avoid any accidental damage.

Now that the panel cover is removed, you can proceed to the next steps of removing the wires from the panel and the power wires.

Exploring Drone FPV Camera Output

You may want to see also

shundigital

Removing the panel cover

To remove the panel cover of your Vivint Outdoor Camera Pro, you will need a Philips screwdriver and a power source tester. It is also recommended that you wear gloves to protect yourself from any live wires.

First, use the screwdriver to check for any direct current to the circuit by touching the pointed part of the tester to the course. The tester will indicate the source of electric power with a blinking light. This step is important because there may still be electricity flowing even if you have switched off the system.

Next, remove the screw at the top of the panel using the screwdriver. The panel is attached to the circuit with two tabs mounted on the top. Push the tab gently and pull the cover out and down. You can use a white safety strip to fasten the lid. It is normal to hear a beeping alarm at this stage, as the system indicates the opening of the cover with this sound. Keep the panel aside in a safe place to avoid any accidental damage.

Now, you will find two sets of wires inside. One is a power wire that directs the current to the circuit, and the other is for batteries. Use a small-size screwdriver to carefully remove the power wire. If your panel is connected to an ethernet cable, remove this cable before opening the circuit.

Finally, remove the screws from the backplate. Once the screws are removed, the plate and panel will easily detach from the wall.

shundigital

Removing the mounting bracket

To remove the mounting bracket, you will need to remove the screws. Once the screws are removed, the bracket will easily detach from the wall. Keep the bracket in a safe place if you plan to reassemble the panel. After removing the backplate, you will see a small hole in the wall and two wires coming out of it. You can secure these wires with tape. If you want to remove these wires, gently pull them out, but make sure you do not touch them with your bare hands.

The Vivint doorbell camera is designed to be easily transferable and removable. However, it is important to follow the correct steps to avoid damaging the internal circuit. Before beginning the removal process, ensure you have the necessary tools, such as a screwdriver. It is also crucial to disable the Vivint smart home system and unplug the system from the power source to avoid any safety hazards.

Once the mounting bracket is removed, you can proceed to reassemble the doorbell. Reattach all the screws and place the cover on top of the plate. Fix it into place by screwing the top screw.

By following these steps, you can successfully remove the mounting bracket of the Vivint Outdoor Camera Pro and reassemble the doorbell.

shundigital

Reassembling the doorbell

Reassembling the Vivint doorbell is a straightforward process. Here is a detailed guide on how to do it:

Firstly, gather all the parts that you previously removed and kept safe. This includes the front cover, the mounting bracket, the screws, and the wires. It is important to ensure that you have all the necessary components before proceeding.

Next, you will want to attach the wires back to the mounting bracket. Use your screwdriver to secure the wires gently, being careful not to overtighten the screws. Make sure the wires are not touching each other.

Once the wires are secure, you can attach the mounting bracket back to the wall. Align the bracket with the screw holes and fix it in place using the screws. Ensure that the bracket is firmly attached to the wall.

Now, it's time to put the front cover back on. Place the cover over the mounting bracket and gently push it into place until you hear a click, indicating that it is securely attached.

Finally, screw the pieces together to keep everything in place. You may also want to screw the doorbell hole cover onto the wall to prevent dust accumulation and accidental touching of the power wire.

Your Vivint doorbell is now reassembled and ready to be used again. This process is relatively simple, but it is always important to exercise caution when working with electrical devices.

Frequently asked questions

Vivint Outdoor Camera Pro needs to be connected to a power source, so it is recommended to get an installation technician to remove it.

You will need a Philips screwdriver and a tester to check for any direct current to the circuit.

The first step is to disable the Vivint smart home system using the smartphone application.

The second step is to unplug the system from the power source. Switch off the button and gently unplug the course, keeping all wires aside.

The third step is to remove the panel cover. Use the screwdriver to remove the screw at the top of the panel. The panel is attached to the circuit with two tabs mounted on the top. Gently push the tab and pull the cover out and down.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment