Disassembling Lg Flatron 192W Monitor: Removing The Base

If you want to remove the base from your LG 192w Flatron monitor, you'll need to first release the locking knob and then pull the stand base off the monitor. However, it's important to note that this process may vary depending on the specific model of the monitor. Some models may require you to remove the back cover of the monitor to access the screws holding the base in place. This can be done by carefully prying off the cover with your fingers or a flat-head screwdriver. It's important to be cautious during this process to avoid damaging the plastic tabs that hold the cover in place. Once the back cover is removed, simply unscrew the base and reattach the cover.

Remove the back cover of the monitor to access the screws holding the base

To remove the back cover of the LG 192W Flatron monitor, you will need to carefully apply force to separate the back cover from the front bezel. The back cover is connected to the front bezel via plastic tabs, and while it is not hard to remove, tiny bits of plastic will inevitably break off. Therefore, you should be careful to apply only the minimum amount of force required to separate the two parts so that you do not damage the tabs and prevent yourself from reattaching the back cover.

Start by using your fingers to pull the back cover off. Once you have partially separated the bottom edge, switch to using a flat-blade screwdriver as it will be easier to control the amount of force you are using. Work your way around the edge, prying off the back cover.

Once the back cover has been removed, you will be able to access the screws holding the base of the monitor in place. Simply remove these screws, and you will be able to detach the base.

After detaching the base, you can reattach the back cover to the bezel by working your way around the edge and pressing down to snap the tabs into place.

Release the locking knob and pull the stand base off

To remove the base stand of your LG 192W Flatron Monitor, you must first release the locking knob. This will allow you to pull the stand base off the monitor.

• Place the monitor face down on a cushion or soft cloth to protect the screen from scratches.
• Locate the locking knob.
• Turn the locking knob in the arrow direction to release it.
• If the stand base does not come off easily, push the indicated knob down and try again.
• Pull out the stand to remove it from the monitor.

By following these steps, you should be able to successfully remove the base stand from your LG 192W Flatron Monitor. Ensure that you handle the monitor with care and be cautious of any cables or internal components that may be attached to the stand.

Use a flat-head screwdriver to release the plastic lock

To remove the base from an LG 192w Flatron monitor, you will need to use a flat-head screwdriver to release the plastic lock. This process will require careful application of force in the right direction and at the right angle.

First, locate the small, rectangular hole at the back of the stand stalk, close to where it connects to the monitor. Insert the flat-head screwdriver into this hole. You will need to apply some force to release the plastic lock. Once the lock is released, gently apply some downward force to pull the stand stalk off.

It is important to note that this process may require some trial and error to find the correct force angle and position. Be cautious when applying force to avoid damaging any other components of the monitor.

Additionally, there may be cables that are glued or otherwise mounted to the cover, so be sure to check for these before attempting to remove the base.

By following these steps, you should be able to successfully release the plastic lock and remove the base from your LG 192w Flatron monitor.

Pull the cabinet upwards, then push the button to separate the hinge body and stand body

To remove the base from an LG 192W Flatron Monitor, follow these steps:

First, pull the cabinet upwards. This will create some space between the hinge body and the stand body. Be careful not to use excessive force, as you don't want to damage the monitor. Once you've created a small gap, locate the button on the hinge body. It should be labelled "push".

Now, push the button. This will release the lock between the hinge body and the stand body, allowing you to separate the two parts. It may require a bit of force, but if you've pushed the button, it should come apart. Ensure you are pushing the button on the hinge body and not the stand body, as pushing the wrong button may damage the monitor.

At this point, the hinge body and stand body should be separated. If they are not, check that you have followed the previous steps correctly and try again. Now you can continue with the disassembly process, such as removing the back cover and separating the lamp shield from the rear shield.

Be sure to keep track of the various parts and screws as you disassemble the monitor, so that you can reassemble it correctly if needed.

Turn the base lock to open the lock between the base cover and stand body

To remove the base from an LG 192w Flatron Monitor, you will first need to release the locking knob, and then pull the stand base off the monitor.

To do this, first locate the base lock between the base cover and stand body. Turn the base lock to open the lock. Then, separate the stand body and base cover. Finally, carefully pull the stand free from the monitor.

If you need to remove the upper part of the stand, you will need to unscrew the rear cover and remove it. You can then remove the screws securing the upper part of the stand. Remember to replace the rear cover, ensuring all internal parts and cables are in their correct position.

Be aware that there may be cables that are glued or otherwise mounted to the cover.

Frequently asked questions