Removing The Bezel From Your Asus Monitor: A Step-By-Step Guide

how to remove asus monitor bezel

Removing the bezel from an Asus monitor can be a tricky task. While it is possible to remove the bezel, it is important to note that it may void your warranty and could damage your monitor. Some people have shared their methods online, including using binder clips to hold the monitor together or creating a DIY bezel removal kit. There is also an official Asus ROG Bezel-Free Kit available for purchase, which is designed to visually eliminate the gaps between multiple monitors. This kit costs $109 and is compatible with flat monitors under 27 inches with a frameless or slim-bezel design.

Characteristics Values
Kit Name ROG Bezel Free Kit ABF01
Kit Price $109
Compatibility Flat monitors under 27 inches with a four-sided frameless or slim-bezel design
Bezel Width Less than 13 mm
Display Thickness Minimum of 20 mm
Setup Triple monitor setup placed in an angle between 120-130°
Contents Four clips, two lenses, and one angle measurement tool

shundigital

Using the ASUS ROG Bezel-Free Kit

The ASUS ROG Bezel-Free Kit is a great accessory for gamers with multiple-monitor setups. It visually eliminates the gaps where displays connect, creating the appearance of one extra-large wraparound monitor for an immersive gameplay experience. The kit contains optical micro-structures that refract light, bending it inward to hide the bezels underneath.

The ROG Bezel Free kit comes with two assemblies (four adjustable holders and two transparent lenses), for a double or triple monitor setup. It is compatible with flat monitors under 27 inches with a four-sided frameless or slim-bezel design. Each monitor's bezel width must be less than 13mm, and the minimum thickness of the display should be 20mm. The kit is designed for a triple monitor setup placed at an angle between 120-130 degrees, which was determined through internal testing to offer the best balance of comfort and immersion.

The lenses in the kit are made from PET, a type of transparent thermoplastic that is much more durable than glass. This material allows 90% of the light from the monitors to shine through, making the picture under the lenses slightly dimmer than the rest of the display but less distracting than the opaque seams created when two bezels are next to each other.

The ASUS ROG Bezel-Free Kit is easy to set up and includes four clips, two lenses, and one angle measurement tool. Custom clips hold the monitors together at the top and bottom of each seam, helping to align them at the correct angle. The lens sits between them, reducing the kit to just three parts per seam.

To use the ASUS ROG Bezel-Free Kit, first ensure that your monitors meet the compatibility requirements mentioned above. Then, use the included angle measurement tool to ensure that your monitors are placed at the correct angle (between 120 and 130 degrees). Attach the custom clips to hold the monitors together at the top and bottom of each seam. Finally, place the lenses between the monitors, using the clips to secure them in place.

The ASUS ROG Bezel-Free Kit is a great way to create a seamless, immersive gaming experience with multiple monitors. With its easy setup and effective optical micro-structures, it's a great choice for gamers looking to enhance their setup.

shundigital

Removing the bezel from an ASUS VH226H monitor

The ASUS VH226H monitor has a plastic bezel attached to the rear case by plastic clips. To remove the bezel, you will need to release these clips.

First, lay the monitor face down on a smooth, clean surface. Next, remove the four rubber covers hiding the screws in the rear of the monitor with a stiff, pointed tool, such as a metal spudger. Then, remove the four 13.4 mm Philips #1 screws securing the monitor stand. After that, remove the stand from the display.

Now, you can start to release the plastic clips holding the bezel to the rear case. It is recommended to use your fingers for this step rather than prying tools, as these could damage the LCD. Cover your fingertips with a thin cloth to protect them and prevent smudging the LCD. Lay the cloth over one of the long edges of the display, grip the side of the bezel through the cloth, and lift straight up. A few clips in the center will pop free. Be careful to pull straight up and not to pry against the display, as pushing down on it could cause damage. Repeat this procedure on the other long side, then move to the corners.

Each corner is secured by two large clips that cannot be released by simply pulling straight up. Using a thin, stiff prying device, such as a Jimmy, press in against the bottom clip in the lower left corner (beneath the HDMI logo). While pressing the clip in, pull up on the lower edge of the bezel. The entire corner should pop free. Once one corner is released, you should be able to gently twist the bezel off, freeing the remaining corners.

With the bezel removed, you will have access to the internal components of the monitor, including the button board, cables, and housing over the motherboard components.

shundigital

DIY bezel removal kits

DIY Bezel-Free Kit

If you're looking to remove the bezel from your Asus monitor, you can try making a DIY bezel-free kit. This method involves using the Fresnel lens from an old LCD monitor or TV. Here's a step-by-step guide:

  • Acquire an Old LCD Monitor or TV: Look for one with a broken screen or one that is no longer functioning.
  • Disassemble the Monitor or TV: Carefully take apart the device to access the Fresnel lens, which is a thin, transparent film located behind the screen.
  • Cut the Fresnel Lens to Size: Use the original bezel as a template and cut the Fresnel lens into strips that match the size and shape of the bezel.
  • Attach the Fresnel Lens Strips: Place the strips over the bezel of your Asus monitor, ensuring they are aligned correctly. You may need to experiment with different distances and angles to achieve the best results.
  • Secure the Fresnel Lens Strips: Use tape or a similar adhesive to hold the strips in place. Consider using a stronger adhesive, such as epoxy, for a more permanent solution.
  • Adjust and Fine-Tune: Play around with the placement and positioning of the strips to minimise the visibility of the bezel.

You can also purchase DIY bezel-free kits online, such as the one available on Etsy. These kits provide the necessary materials and instructions for removing the bezel from your monitor. However, keep in mind that removing the bezel may void your warranty, and there is a risk of damaging your monitor during the process.

DIY Bezel Removal Tool

If you're looking for a tool to help with bezel removal, you can create a simple and inexpensive DIY bezel removal tool using the following items:

  • Hockey puck
  • Hole saw (1 1/2")
  • Drill
  • Drill bit
  • Hand saw

Here's how to make and use the tool:

  • Drill a Hole in the Hockey Puck: Use the drill bit to drill a hole straight through the centre of the puck.
  • Cut Out the Centre of the Puck: Using the hole saw, cut out the centre portion of the puck from both sides until you have a "donut"-shaped puck.
  • Modify the Puck: Take the hand saw and cut out about 1" from the puck, so it resembles a "C" shape.
  • Remove the Bezel: Place the modified puck on your bezel, squeeze hard, pull straight up, and twist in the opposite direction of the bezel's rotation. Be sure to perform these actions simultaneously for the best results.

This method is particularly useful for removing bezels from watches without risking scratches on the case.

shundigital

Removing the bezel from a triple-monitor setup

The ROG Bezel-Free Kit ABF01 is a great option for removing the bezel from a triple-monitor setup. It is designed for gamers with multiple-monitor setups to visually eliminate the gaps where their displays connect, creating the appearance of one extra-large wraparound monitor for an immersive gameplay experience. The kit contains optical microstructures that refract light, bending it inward to hide the bezels underneath. It is compatible with flat monitors under 27 inches with a four-sided frameless or slim-bezel design. The kit includes four clips, two lenses, and an angle measurement tool for easy setup.

Another option is to create a DIY bezel removal kit. You will need to find an old monitor to pull apart for the Fresnel layer, then cut it to size and build or 3D print a holder to keep it in place. If your screen has plastic bezels at the bottom, you can use cellotape to hold the strips against the top of the bottom bezel to prevent them from being pushed away from the screen and impacting the image.

Additionally, some people have used epoxy or glue to hold the monitors together after removing the bezel. However, this may not be a long-lasting solution and could end up ruining your monitor.

It is important to note that removing the bezel from your monitor may void your warranty, and you should proceed with caution as you could damage your monitor.

shundigital

Using binder clips to hold the monitor together

While removing the bezel from your Asus monitor, you can use binder clips to hold the monitor together. This is a simple, temporary solution that can be easily adjusted.

To start, place a binder clip on the edge of your desk, clamping down the metal arm loops to hold the monitor in place. You can also use the metal arm loops to corral cords and prevent tangles.

For a more secure hold, you can use binder clips in conjunction with other materials. For example, you can use adhesive hooks, such as Command hooks, at the top and bottom of each monitor, and then use rubber bands or zip ties to pull the monitors together. Alternatively, you can use double-sided tape or hot glue to fill in the gap between the monitors and secure them together.

If you're looking for a more permanent solution, you can use a hot glue gun to attach the monitors together. Simply apply the glue to the top and bottom of the monitors, hold them in the desired position until the glue cools, and you're done!

Frequently asked questions

You can remove the bezel from your Asus monitor by purchasing the ROG Bezel-Free Kit ABF01. This kit is compatible with flat monitors under 27 inches with a four-sided frameless or slim-bezel design. It includes four clips, two lenses, and an angle measurement tool to help you set up your monitor without the bezel.

The ROG Bezel-Free Kit is an accessory designed to visually eliminate the gaps between multiple monitors, creating the appearance of one extra-large wraparound monitor. It achieves this by using optical micro-structures that refract light, bending it inward to hide the bezels underneath. The kit includes custom clips that hold the monitors together at the top and bottom of each seam, with a lens sitting between them to reduce the setup to just three parts per seam.

Yes, there are DIY methods to remove bezels from monitors. One method involves finding an old monitor to pull apart for the Fresnel layer, then cutting it to size and building or 3D printing a holder to keep it in place. However, this method may not work as well as the official Asus kit.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment