Installing Pillow Tft Lcd Color Monitors: A Step-By-Step Guide

If you're looking to install a Pillow TFT LCD colour monitor, you've come to the right place. In this guide, we'll take you through the step-by-step process of installing a foldable TFT colour LCD car reverse rear-view monitor. This monitor will enhance your driving experience and provide added safety when reversing or parking. With clear visuals and instant-on capability, you'll always be aware of your surroundings. So, whether you're driving a car, pickup truck, or van, follow these instructions for a successful installation.

Attaching the monitor to the license plate

Once you have gathered the necessary tools and hardware, follow these steps:

• Carefully position the monitor on the license plate, ensuring it is centred and aligned correctly.
• Using the appropriate hardware, securely fasten the monitor to the license plate bolt. The process may involve drilling or screwing, depending on the specific hardware and vehicle.
• Double-check that the monitor is firmly attached and test the stability by gently trying to move it in different directions.
• Ensure that the monitor is positioned correctly and does not obstruct your view or any other vehicle functions.
• If needed, make any necessary adjustments to the monitor's position or angle to ensure optimal visibility and safety.

By following these steps, you can securely attach the monitor to the license plate, ensuring a clear view of the display without obstructing your regular driving visibility. Remember to refer to any provided instructions or seek professional advice if you encounter any challenges during the installation process.

Connecting the monitor to power

To connect your Pillow TFT LCD colour monitor to power, you will first need to decide how you want the monitor to behave. You can either wire the monitor to turn on only when your vehicle is in reverse, or you can wire it to the "key-on" hot lead from your fuse panel so that it is on all the time.

If you want the monitor to turn on only when your vehicle is in reverse, you will need to run a wire from the reverse light circuit to the blue (acc) lead on the display. This will trigger the monitor to turn on when you put your vehicle in reverse.

If you want the monitor to be on all the time, you can wire it to the "key-on" hot lead from your fuse panel. To do this, connect the black lead from the display to the "key-on" hot lead.

Alternatively, if you want to be able to turn the monitor on and off manually, you can wire the power to the cigarette lighter so that it only turns on when the key is on. You can then add a toggle switch to control the power.

Once you have decided how you want the monitor to behave, you can connect the power wires to the appropriate leads. The red wire is for power, and the black wire is for ground.

Please note that some users have reported issues with the brightness of the monitor when it is wired to the cigarette lighter. It is recommended to run the power from the back-up light to the monitor to avoid this issue.

Connecting the monitor to the camera

To connect the Pillow TFT LCD monitor to your camera, you will need to follow a few simple steps. Firstly, locate the video input port on the monitor, which is usually labelled as "Video In" or "RCA Input". This port will be used to connect the monitor to the camera.

Next, identify the video output port on your camera. This port may be labelled as "Video Out" or "RCA Output". Using an RCA cable, connect the camera's video output port to the monitor's video input port. Ensure that the cable is securely plugged into both devices.

Now, we will need to establish a power connection for the monitor. The Pillow TFT LCD monitor typically has a power input port labelled as "Power" or "DC In". Connect the power adapter that came with the monitor to this port, and then plug the adapter into a power outlet or your vehicle's cigarette lighter.

At this point, you should turn on both the camera and the monitor. If everything is connected correctly, you should see the camera's footage displayed on the monitor's screen.

Finally, adjust the settings on the monitor to ensure optimal performance. This may include adjusting the brightness, contrast, and colour settings to your preference. You may also need to configure the aspect ratio and input source on the monitor to match your camera's output. Refer to the user manuals for both the camera and the monitor to fine-tune these settings.

Adjusting the monitor's display settings

To adjust the display settings of your Pillow TFT LCD Color Monitor, you will need to access the setup menu. This will allow you to navigate to the display settings and make adjustments.

Firstly, ensure you have the correct equipment and that it is installed properly. This includes having the necessary wires, such as the power and ground wires, audio output, and video input cables. If your monitor has a DVD player built-in, you will also need a constant power wire.

Once your monitor is properly installed and functioning, you can adjust the display settings to your preference. To do this, locate the button that opens the setup menu. This may be labelled as "Menu" or have a symbol resembling a set of lines or dots. Press this button to enter the setup menu.

Use the buttons on the monitor to navigate through the setup menu. Look for an option labelled "Display Settings," "Display," or something similar. Select this option to access the settings related to the display.

Within the display settings menu, you will find various options to adjust the monitor's display. This may include settings such as brightness, contrast, colour temperature, and input source. Make adjustments by using the buttons to navigate through the options and change the settings as desired.

If you are unable to locate the setup menu or the specific display settings, refer to the instruction manual for your Pillow TFT LCD Color Monitor. This should provide detailed instructions on how to access and adjust the display settings for your specific model.

Testing the monitor's functionality

Firstly, power on the monitor and ensure that the display is clear and free of any dead pixels or abnormalities. Adjust the brightness, colour, and contrast settings to your preference using the menu function keys. If your monitor has a touch screen, test this functionality by navigating the settings and ensuring the touch response is accurate and precise.

Next, connect the monitor to an external device such as a DVD player, VCR, or car backup camera. Test different input sources by switching between AV1 and AV2 to ensure the monitor can display video signals from various devices. Check that the audio is functioning correctly by playing content with sound and adjusting the volume using the monitor's controls or remote.

If your monitor has multiple input methods, such as HDMI, VGA, or BNC, test each of these connections with compatible devices to ensure they are working. This includes connecting to a computer, laptop, or Raspberry Pi to ensure compatibility and a stable display.

For car rearview monitors, test the backup camera functionality by mounting the camera to your license plate and connecting it to the monitor. Ensure the camera powers on when you engage reverse gear and that the monitor displays the camera feed instantly. Check the camera's night-vision capability by testing it in low-light conditions; the night vision should be enhanced by your car's reverse lights and brakes.

Finally, for monitors with remote controls, test the remote's functionality by powering the monitor on and off, changing input sources, and adjusting settings using the remote. Ensure the remote has a clear line of sight to the monitor's infrared receiver and that all buttons are responsive.

By following these steps, you can comprehensively test the functionality of your Pillow TFT LCD Color Monitor and ensure it meets your specific requirements.

Frequently asked questions