Charging The Fuji X-A10: A Step-By-Step Guide

The Fujifilm X-A10 is a digital mirrorless interchangeable lens camera that features a 16.0MP sensor and is powered by the Fujifilm NP-W126S, a rechargeable lithium-ion battery pack. The NP-W126S operates at a voltage of 7.2V and has a capacity of 1260mAh. The battery takes about 210 minutes to fully charge and can be charged from a standard electrical outlet via the Fujifilm BC-W126 charger or via the camera's USB port.

Charging the battery via a computer

The Fujifilm X-A10 camera uses an NP-W126S rechargeable battery. This can be charged by connecting the camera to a computer using the supplied USB cable.

To charge the battery via a computer, follow these steps:

• Ensure the camera is turned off.
• Use the supplied USB cable to connect the camera to the computer.
• Connect to the camera's Micro USB (Micro-B) connector, checking that the connectors are correctly oriented and fully inserted.
• Connect the camera directly to the computer, not through a USB hub or keyboard.
• Charging may stop if the computer enters sleep mode; to resume, activate the computer and disconnect and reconnect the USB cable.
• Charging may not be supported depending on the model of the computer, its settings, and its current state.

The battery will take about 210 minutes to fully charge. It is recommended to charge the battery one or two days before use, as it gradually loses its charge when not in use.

Using a Fujifilm NP-W126S battery

The Fujifilm NP-W126S is a rechargeable lithium-ion battery pack that powers the Fujifilm X-A10 camera. This battery type is also compatible with other selected Fujifilm cameras. The NP-W126S operates at a voltage of 7.2V and has a capacity of 1260mAh. It can be charged from a standard electrical outlet using the Fujifilm BC-W126 charger, purchased separately, or via the USB port on the camera by connecting it to a computer.

To charge the NP-W126S battery using the Fujifilm BC-W126 charger, follow these steps:

• Attach the plug adapter to the AC power adapter, ensuring it is fully inserted and clicks into place.
• Connect the camera to the AC power adapter using the supplied USB cable.
• Plug the AC power adapter into an indoor power outlet.
• Ensure that the connectors are correctly oriented and fully inserted.

When charging the battery, it is important to note that the battery will not charge while the camera is turned on. Additionally, it is recommended to keep the battery terminals clean and free from dirt by wiping them with a dry cloth.

The NP-W126S battery takes approximately 210 minutes to fully charge. It is also available from third-party suppliers at a lower cost, although Fujifilm recommends using only designated battery chargers to avoid product malfunction.

Charging the battery via a Fujifilm BC-W126 charger

To charge the battery via a Fujifilm BC-W126 charger, first ensure that you have the correct battery type. The Fujifilm X-A10 camera uses the Fujifilm NP-W126S rechargeable Lithium-Ion battery pack.

The Fujifilm BC-W126 charger is compatible with the NP-W126/NP-W126S battery and takes approximately 150 minutes to fully charge.

• Check that your NP-W126S battery is inserted correctly into the BC-W126 charger.
• Plug the charger into a power outlet. The BC-W126 charger may have a removable prong that plugs directly into the wall outlet, or it may have a power cord that connects to the charger and plugs into the outlet.
• The charger will take about 2.5 hours to fully charge the battery. The indicator light on the charger should notify you when the battery is fully charged.
• Once the battery is fully charged, unplug the charger from the power outlet, and remove the battery from the charger.
• Insert the charged battery into your Fujifilm X-A10 camera, and you are ready to start shooting!

Note: It is important to only use designated Fujifilm chargers and batteries to ensure safety and compatibility. Charging times may vary depending on temperature and other factors. Always refer to the user manual for specific instructions and safety precautions.

Using a generic replacement battery

The Fujifilm X-A10 is a digital mirrorless interchangeable lens camera that uses the Fujifilm NP-W126S rechargeable lithium-ion battery pack. This battery can be charged via the USB port on the camera, or by using the Fujifilm BC-W126 charger, which can be purchased separately.

Given the high price of the original Fujifilm NP-W126S battery, generic alternatives are available at a much lower cost. These can be found on major online platforms such as Amazon and eBay. While these generic batteries are compatible with the Fujifilm X-A10, it is important to note that they may not offer the same assurances as the original battery in terms of capacity, charge retention, and safety guidelines.

When using a generic replacement battery, it is recommended to follow the same charging instructions as the original Fujifilm NP-W126S battery. Here are some detailed instructions on how to charge the battery on the Fujifilm X-A10 camera:

• Turn off the camera before charging the battery.
• Ensure that the battery terminals are free from dirt by cleaning them with a dry cloth.
• Connect the supplied USB cable to the camera's Micro USB (Micro-B) connector, making sure the connectors are fully inserted and in the correct orientation.
• Plug the other end of the USB cable into the supplied AC power adapter.
• Attach the plug adapter to the AC power adapter, ensuring it is fully inserted and clicks into place.
• Plug the AC power adapter into an indoor power outlet.
• The indicator lamp will show the battery charge status.

It is important to note that the battery will not charge while the camera is turned on. Additionally, charging times may vary depending on the temperature, and it is recommended to charge the battery one or two days before use as it gradually loses its charge over time.

By following these instructions, you can effectively charge a generic replacement battery for your Fujifilm X-A10 camera.

Charging the battery via a car charger

To charge your Fujifilm X-A10 camera battery via a car charger, you will need to follow these steps:

Firstly, ensure that you have the correct car charger for your camera model. The Fujifilm X-A10 is powered by the Fujifilm NP-W126S battery, which is a rechargeable lithium-ion battery pack. You can purchase a car charger that is compatible with this battery type.

Once you have the car charger, follow these steps:

• Turn off your camera: It is important to note that the X-A10 camera will not charge the battery while the camera is on.
• Connect the car charger: Plug the car charger into the car's power outlet, usually located in the dashboard or centre console.
• Connect the camera to the car charger: Use the supplied USB cable to connect your camera to the car charger. Ensure that the connectors are in the correct orientation and insert them fully.
• Wait for the battery to charge: The charging time will vary, but it usually takes around 210 minutes to fully charge the NP-W126S battery. You can refer to the indicator lamp on the camera to check the charging status.
• Remove the battery from the charger: Once the battery is fully charged, unplug the USB cable from the camera and car charger. Then, remove the battery from the camera and insert it back into the charger to continue charging.

It is important to use a compatible car charger to avoid damaging the battery or the camera. Additionally, make sure to charge the battery in a well-ventilated area and avoid exposing it to extreme temperatures or moisture.

Frequently asked questions