Charging Your Kodak Camera Battery: How Long Does It Take?

Kodak EasyShare digital cameras come with either non-rechargeable or rechargeable Li-Ion batteries. The Kodak Printomatic, for example, has a small 7.4V lithium-ion battery that can be fully charged in about two hours. Kodak recommends using wall adapters rated for one amp. The battery charging process for Kodak cameras involves turning off the camera, connecting the USB cable to a powered USB port, and charging until the battery charging light turns off, which can take up to three hours.

Kodak EasyShare M1063/MD1063/MX1063 digital camera charging instructions

To charge your Kodak EasyShare M1063/MD1063/MX1063 digital camera, follow these steps:

• Ensure you have the correct battery type for your camera. The Kodak EasyShare M1063/MD1063/MX1063 camera is compatible with the Kodak KLIC-7001 battery. You can purchase this battery from various retailers, including Amazon and Kastar.
• Obtain a compatible charger for your Kodak KLIC-7001 battery. Options include:

• Kastar K7001 Battery and AC Wall Charger
• MaxLLTo AC/DC Wall Battery Power Charger Adapter with USB Cord
• AC Wall Battery Power Charger Adapter with USB Cord
• In-Camera Battery Power Charger AC Adapter Cord Cable

• Connect the charger to a power source, such as a wall outlet or a USB port on your computer.
• Remove the battery from your Kodak EasyShare camera.
• Insert the battery into the charger, following the instructions provided with your specific charger.
• Allow the battery to charge fully before removing it from the charger. The charging time may vary depending on the charger and the battery's remaining power.
• Reinsert the charged battery into your Kodak EasyShare camera, ensuring it is properly aligned and secured.

By following these instructions, you can ensure your Kodak EasyShare M1063/MD1063/MX1063 digital camera battery is properly charged and ready for use. Remember to refer to the specific instructions provided with your chosen charger for the best results.

Kodak Printomatic charging time

The Kodak Printomatic is a digital instant print camera that produces both digital and physical photos. The camera is charged using a micro-USB cable, which is included with the camera. The micro-USB cable can be plugged into any USB-A port, such as on a computer or charging block, or into a wall adapter rated at 1 amp. Kodak recommends only using wall adapters rated for one amp.

The Kodak Printomatic has a small 7.4V lithium-ion battery, which allows it to take and print about 40 photos before needing to be recharged. The battery is not removable, so when it degrades over time, the entire camera will need to be replaced. The Kodak Printomatic also features a low-battery indicator light, which switches on when the battery is lower than 10% of its full capacity.

Charging the Kodak Printomatic from 0% to 100% battery capacity takes approximately two hours. When the camera reaches a full charge, the LED battery light will stop flashing red.

Kodak EasyShare M883 zoom digital camera charging instructions

To charge your Kodak EasyShare M883 zoom digital camera, follow these steps:

First, ensure that your camera is running firmware version 1.02 or higher. Press the Menu button, then press to highlight the Setup tab. Next, press to highlight About, and then press OK. If your camera is running a lower version, you will need to download and install version 1.02 or higher from www.kodak.com/go/m883support.

Once your camera is up to date, you can charge the battery using the USB cable. Make sure that the USB cable is connected to a powered USB port and that your computer is turned on and not in sleep mode. If the battery charging light does not turn on, check these connections. For more information on USB charging, visit www.kodak.com/go/USBcharging.

You can also charge the battery using other accessories, such as the Kodak USB AC adapter, the Kodak EasyShare photo frame dock 2, the Kodak EasyShare camera or printer dock, or the Kodak Li-Ion universal battery charger K7600-C. These accessories are available for purchase at www.kodak.com/go/m883accessories. Remember to turn off your camera before charging it with any of these accessories.

Additionally, there are external chargers available from third-party sellers, such as the Pwr 5V Charger, which is UL Listed and has an extra-long 6.5 ft power cord.

Kodak EasyShare M320 Digital Camera battery charging

The Kodak EasyShare M320 Digital Camera can be charged using a USB cable. The camera is compatible with both a computer USB port and a USB AC adapter.

To charge the camera using a computer, first, turn off the hibernation standby and sleep modes on your computer. Then, turn off your camera and verify that the correct battery is installed. Connect the USB cable to your camera and the USB port on your computer. Do not use a USB hub. The charging time is approximately 3 hours.

To charge the camera using a USB AC adapter, first, turn off your camera and verify that the correct battery is installed. Plug the USB AC adapter into a working power outlet and connect the USB cable to your camera and the USB AC adapter. The charging time is approximately 3 hours.

It is important to note that not all Kodak cameras can be charged using a USB port. The Kodak EasyShare M320 camera is one of the models that support USB charging.

Kodak EasyShare camera battery charging tips

Turn off your camera

Before charging your Kodak EasyShare camera, make sure that the camera is turned off. This is the first step to take when setting up your camera for charging.

Check your camera's firmware version

Ensure your camera is running firmware version 1.02 or higher. You can check this by pressing the Menu button, then highlighting the Setup tab, and finally, highlighting About and pressing OK. If your camera is running a lower version, download and install version 1.02 or higher from the Kodak website.

Use the correct charging accessories

Use the Kodak USB AC adapter or the Kodak Li-Ion universal battery charger to charge your camera. You can also use the Kodak EasyShare camera or printer docks, but these may be sold separately. When using the USB cable, connect it to a powered USB port on your computer, and ensure the computer is turned on and not in sleep mode.

Charging time

Charge your Kodak EasyShare camera until the Battery Charging light turns off, which can take up to 3 hours. The battery charging light will indicate when your camera is fully charged.

Extend battery life

To maximize your battery life, limit activities that quickly deplete battery power, such as reviewing pictures on the camera screen, using the camera screen as a viewfinder, and excessive use of the flash. Keep your battery contacts clean by wiping them with a dry cloth before inserting batteries into the camera. Battery performance is also reduced in cold temperatures, so carry spare batteries and keep them warm when using your camera in cold weather.

Frequently asked questions