Charging The Garmin Virb: Battery Power Explained

Charging your Garmin Virb camera battery is simple and can be done in a few ways. The most common method is to use the provided USB cable, connecting one end to the micro-USB port on the camera and the other to a power source such as a computer, USB wall charger, or external battery pack. It's important to ensure the camera is turned off during charging, and you can verify the charging process has begun by checking the LED indicator. The battery typically takes a few hours to fully charge, and once complete, you can disconnect the USB cable and start using your camera. For faster charging, you can use a wall adapter with a USB port, and if you're on the go, a car charger with a USB port is a convenient option. It's recommended to follow the manufacturer's guidelines for optimal performance and to use the official Garmin charger or a reputable third-party charger to prolong your battery life.

Using the provided USB cable

To charge your Garmin VIRB camera battery, you should use the provided USB cable. This cable will have a unique micro-USB connector designed specifically for the Garmin VIRB. It is important to use this cable to avoid damaging the device.

Take the smaller end of the provided USB cable and connect it to the micro-USB port on the camera. The cable should fit snugly and securely. Once connected, plug the larger end of the USB cable into your chosen power source. This could be a computer, a USB wall charger, or even a compatible external battery pack.

When using a computer, it is important to note that some may not provide enough power to charge the device. A USB wall charger that provides at least a 2A power output is recommended for optimal charging. Additionally, ensure that you are using the original cable provided by Garmin. Using third-party cables may lead to charging issues and could potentially damage the device.

Allow the battery to charge fully. Depending on the model, it can take approximately two to three hours to reach a full charge. Once charged, simply disconnect the USB cable, and your Garmin VIRB camera will be ready for use.

Charging via wall outlet

To charge your Garmin Virb camera battery via a wall outlet, follow these steps:

Firstly, ensure your camera is turned off. The camera does not charge while it is turned on, and most power sources do not provide enough power to charge the device while it is on.

Now, locate the micro-USB port on your camera body. This is usually on the side of the camera. Slide the latch to open the side door, revealing the port.

For wall charging, you will need to use the provided USB cable. Take the smaller end of the USB cable and plug it into the micro-USB port on the camera. Ensure you use the provided cable or another cable with a straight micro-USB connector. Do not use a micro-USB cable with a right-angle connector as this may cause damage to the port.

Next, plug the large end of the USB cable into a USB wall charger. For optimal results, it is recommended to use a USB wall charger that provides at least a 2A power output. Many USB power adapters designed for smartphones or tablets may be compatible.

Once connected, the camera's LED indicator should illuminate, indicating that the charging process has begun. Allow the battery to charge fully, which typically takes around 2-3 hours, depending on the battery capacity. When the battery is fully charged, the red status LED will turn off.

Finally, disconnect the USB cable, and your Garmin Virb camera should now be ready for use. Remember to follow the manufacturer's guidelines for charging and battery maintenance to ensure optimal performance and longevity of your device.

Charging via computer

To charge your Garmin Virb camera battery via a computer, follow these steps:

Firstly, ensure your camera is turned off. The camera does not charge while it is turned on, and most power sources do not provide enough power to charge the device while it is on.

Locate the micro-USB port on your camera body. Using the provided USB cable, connect the smaller end of the cable to this port. It is important to use the original cable provided with your camera, as third-party cables may not work effectively or could cause damage.

Next, plug the large end of the USB cable into a USB port on your computer. The battery may charge slowly when using a computer USB port, and some portable computers may not provide enough power to charge the battery. For optimal results, use a USB wall charger that provides at least a 2A power output.

When you connect the camera to your computer, the top status LED should turn solid red. This indicates that your camera is charging. It takes approximately two hours to charge the battery to 80% capacity and approximately three hours to fully charge it. Once the battery is fully charged, the red status LED will turn off.

It is important to note that you should only use the included micro-USB cable or another cable with a straight micro-USB connector. Do not use a micro-USB cable with a right-angle connector, as this may cause damage to the recessed micro-USB port.

Using a car charger

If you're on the go, you can charge your Garmin Virb camera using a car charger with a USB port. This is especially useful for travellers and outdoor enthusiasts.

To charge your Garmin Virb camera battery using a car charger, follow these steps:

First, turn off your camera. The camera does not charge the battery while it is turned on. It is possible to operate the camera using external power, but the battery charge level will not increase until you turn it off.

Then, locate the micro-USB port on the camera body. Using the provided USB cable, connect the smaller end of the USB cable to the camera and the larger end to the car charger. Ensure that the connections are secure.

The camera's LED indicator should illuminate, indicating that the charging process has begun. Allow the battery to charge fully, which typically takes a few hours depending on the battery capacity. When the camera is fully charged, the status LED turns off.

It is recommended to use the official Garmin charger or a reputable third-party charger to prolong the battery life of your Garmin Virb.

Always refer to the latest user manual or support documentation for your specific Garmin Virb model, as charging methods and recommendations may vary.

Charging with an external battery pack

To charge your Garmin Virb camera using an external battery pack, you'll need to follow a few simple steps to ensure safe and efficient charging.

Firstly, locate the micro-USB port on your camera. This is usually found on the side of the camera body. It's important to ensure that your camera is turned off, as most power sources will not charge the camera while it is on. Then, take the provided USB cable and connect one end to the micro-USB port, being careful to use a cable with a straight micro-USB connector to avoid damaging the port.

Now, you can connect the other end of the USB cable to your external battery pack. Ensure that the external battery pack is adequately charged and able to provide a stable power output. The camera's LED indicator should illuminate, signalling the start of the charging process.

While charging, it's advisable to keep an eye on the LED status lights. The top status LED turning solid red indicates that the camera is connected and charging. It's worth noting that charging via a computer USB port may be slower, and some portable computers might not provide sufficient power. Therefore, it is recommended to use a USB wall charger that provides at least a 2A power output for faster and more efficient charging.

Finally, allow the battery to charge fully. Depending on the model of your Garmin Virb camera, charging times may vary. Typically, it takes about two hours to reach 80% charge and approximately three hours to fully charge the battery. Once the battery is charged, disconnect the USB cable, and your camera should be ready for use. Remember to follow the manufacturer's guidelines for optimal charging and battery maintenance to ensure the longevity of your device.

Frequently asked questions