Unlocking Asus Monitor: Stuck At 60Fps, Why?

If your ASUS monitor is stuck at 60fps, there could be several reasons. First, check your display settings and ensure that your screen refresh rate is set to the correct value. Next, confirm that you are using the right type of cable to connect your monitor to your computer. If you are using a dual-monitor setup, try unplugging the second monitor to see if that resolves the issue. Additionally, check your in-game settings and graphics card control panel to ensure that V-Sync and other frame rate-limiting options are disabled. Finally, updating your graphics drivers and performing a system reset may also help fix the issue.

Check your display settings

If your ASUS monitor is stuck at 60fps, it's worth checking your display settings.

First, check your display settings in Windows. In Windows 7, go to Control Panel > Display > Screen Resolution > Advanced Settings > 'Monitor' tab. In Windows 10, go to Display > Display adapter settings > Monitor > Refresh rate. Ensure that your screen refresh rate is set to a higher rate than 60Hz.

Next, check your display settings in the NVIDIA Control Panel. Go to the Display tab, then 'Adjust desktop size and position'. From the drop-down menu for Refresh Rate, check that the rate is set higher than 60Hz.

You should also check your in-game settings. Ensure that you are playing in fullscreen mode, and that V-sync is disabled.

If you are using a Display Port cable, ensure that you are using a DP 1.4 or 2.0 cable.

Try a different cable

If your ASUS monitor is stuck at 60fps, trying a different cable is a good idea. This is because the type of cable you use can affect the maximum refresh rate that your monitor can support. For example, HDMI cables typically cannot support a refresh rate above 60Hz, whereas DisplayPort cables can support up to 144Hz or more.

If you are using an HDMI cable, try switching to a DisplayPort cable. If you are already using a DisplayPort cable, try using a different one, as some DisplayPort cables may only support up to 60Hz. Make sure that the cable you use is the one that came with your monitor, as some monitors may come with multiple cables. If you are using a DisplayPort cable, ensure that it is a DP 1.4 or 2.0 cable, as these versions support higher refresh rates.

Additionally, if you are using multiple cables to connect your monitor, try unplugging the HDMI cable. For example, one user reported that when they unplugged their HDMI cable from their graphics card, their game's refresh rate increased from 60Hz to 144Hz. This may be because, by default, Windows duplicates the screen for the DisplayPort and HDMI cables, and if you duplicate a 144Hz monitor with a 60Hz monitor, the refresh rate will be limited to 60Hz on both monitors.

Finally, if you are using an adapter or converter to connect your monitor, try using a different one or connecting your monitor directly to your device. Adapters and converters can sometimes cause issues with refresh rates, so it is worth trying a different setup if possible.

Check your in-game settings

If your ASUS monitor is stuck at 60fps, it's worth checking your in-game settings.

First, ensure that V-Sync is disabled. V-Sync will cap your frame rate to the refresh rate set in your Nvidia control panel. If you have set a limit in the GPU control panel, try removing it.

Next, check that your game is set to 'Exclusive Fullscreen'. In this mode, the game, rather than your desktop environment, will set the refresh rate. If your game is set to windowed or borderless fullscreen, it may default to 60Hz.

If you are running dual monitors, ensure that your 60Hz monitor is not set as the primary monitor. If you select a 60Hz monitor to duplicate, you will limit the refresh rate to 60Hz on both monitors.

Finally, if you are using recording software, try disabling it. Software such as Gamebar or Geforce Experience may interfere with your refresh rate.

Check your graphics card control panel

If your ASUS monitor is stuck at 60fps, there are several steps you can take to troubleshoot the issue. One key area to check is your graphics card control panel. Here are some detailed instructions to guide you through the process:

• Identify Your Graphics Card Control Panel: Depending on your graphics card, you may have a dedicated control panel such as NVIDIA Control Panel or AMD Radeon Settings. You can usually find these in your system tray or by searching for them in your Start menu.
• Verify the Refresh Rate Settings: Once you've located your graphics card control panel, navigate to the "Display" or "Monitor" settings. Look for the "Refresh Rate" or "Hz" setting. Ensure that it is set to your desired refresh rate, which should match or exceed your monitor's maximum refresh rate. For example, if you have a 144Hz monitor, set the refresh rate to 144Hz or higher.
• Disable V-Sync: In your graphics card control panel, look for Vertical Sync or V-Sync settings. Disable V-Sync if it is enabled. V-Sync can sometimes limit the frame rate to the monitor's refresh rate, which could be causing the issue.
• Check for FPS Limits: Some graphics card control panels allow you to set an FPS limit. Ensure that you haven't set any FPS limits that might be restricting your frame rate to 60fps.
• Update Graphics Drivers: Make sure that you have the latest graphics drivers installed. Outdated or corrupt drivers can sometimes cause issues with display settings. You can usually download the latest drivers from the manufacturer's website.
• Adjust In-Game Settings: If you're experiencing low FPS in specific games, check their in-game settings. Ensure that you're running the games in fullscreen mode and that any FPS limits or V-Sync options are disabled.
• Try Overclocking Tools: If your graphics card supports overclocking, you can try using tools like ASUS GPU Tweak to increase the performance and potentially unlock higher frame rates. However, use these tools with caution as overclocking can put additional stress on your hardware.
• Reinstall Graphics Drivers: If none of the above steps work, try reinstalling your graphics drivers. Sometimes, a clean installation of the latest drivers can resolve display issues.

Remember to check your specific graphics card control panel documentation for detailed instructions, as the steps may vary slightly depending on your graphics card manufacturer and model.

Try a factory reset

If your Asus monitor is stuck at 60 FPS, you can try performing a factory reset. This can be done by following these steps:

• Press the button above the power button (a down arrow) while the monitor is booting up.
• This will take you to the HDMI mode, and from there, you can keep pressing to get back into VGA mode, depending on your connection cable.
• Once you are in the correct mode, go into the Windows Display settings by going to Control Panel > Display > Screen Resolution > Advanced Settings > 'Monitor' tab.
• Here, you can set the screen refresh rate to 165 Hz. Make sure that you have also set the correct monitor as your primary monitor.
• If you are using an Nvidia graphics card, open the Nvidia Control Panel and go to the Display Tab.
• In the Display Tab, find the 'Adjust desktop size and position' section and select the refresh rate that you want from the drop-down menu.
• Ensure that V-sync is disabled on your monitor and in your game settings.
• If you are still having issues, try updating your display drivers and making sure that your cables are connected properly and are compatible with your desired refresh rate.

By following these steps, you should be able to perform a factory reset on your Asus monitor and fix the issue of being stuck at 60 FPS.

Frequently asked questions