Choosing The Right Allen Key Size For Delta Monitor Faucet

what size alken key for delta monitor faucet

If you need to adjust the flow valve on your Delta faucet, you'll need to use an Allen key to remove the handle and access the valve. The correct size of the Allen key depends on the specific model of the Delta faucet. For example, the Delta Multichoice 14 faucet requires a 1/8 inch Allen key, while the Delta Faucet RP26853 model uses a 3/32-inch Allen key. It's worth noting that some Delta faucets may use metric sizes for their Allen keys, so it's important to check the specific requirements for your faucet model.

Characteristics Values
Brand Delta Faucet
Product Name RP52139 Set Screw and Allen Wrench
Colour Chrome
Product Dimensions 0.2 x 0.2 x 1 inches
Warranty Faucet and Finish Lifetime Limited Warranty
Rating 3.9 out of 5 stars
Number of Ratings 79
Price $15.22

shundigital

Delta Faucet RP52139 Set Screw and Allen Wrench

The Delta Faucet RP52139 Set Screw and Allen Wrench is designed exclusively for Delta faucets. It has a chrome finish and comes with a lifetime limited warranty for the faucet and finish. The product dimensions are 0.2 x 0.2 x 1 inch.

The Delta Faucet RP52139 Set Screw and Allen Wrench is available on Amazon.com and Build.com. On Amazon, it has received mixed reviews, with an average rating of 3.9 out of 5 stars from 79 ratings. Some customers have expressed disappointment with the price, while others have found it to be a handy tool that works well.

For those looking for an Allen wrench to fit their Delta faucet, it is important to note that the correct size may vary depending on the specific model of the faucet. In the case of the Delta Multichoice 14 faucet, one user reported that a 1/8 inch hex Allen wrench was the correct size.

Another Delta faucet Allen wrench option is the Delta Faucet RP26853 Allen Wrench for 3/32-Inch, which is also available on Amazon.com. This product has received an average rating of 2.9 out of 5 stars from 16 ratings. While some customers have found it to be the correct size for their Delta faucet, others have reported that it did not fit their particular model. Therefore, it is always a good idea to check the specific requirements for your faucet model before purchasing any tools or replacement parts.

shundigital

Delta Faucet RP26853 Allen Wrench

The Delta Faucet RP26853 Allen Wrench is a 3/32-inch Allen wrench designed exclusively for Delta faucets. It is made to the original specifications and has been rigorously tested to ensure quality performance.

The Delta Faucet RP26853 Allen Wrench is currently unavailable on Amazon.com, and it is unclear when or if it will be back in stock. However, similar items that are compatible with Delta faucets are available. For example, the EKLIND 14206 3/32 Inch Long Series Hex-L Key Allen wrench is available on Amazon.com and has received positive reviews from customers.

It is important to note that some customers have mentioned that the Delta Faucet RP26853 Allen Wrench did not fit their Delta kitchen faucet handle screw, which requires a 1/8-inch Allen wrench. Therefore, it is essential to verify the correct size required for your specific Delta faucet model before purchase.

The Delta Faucet RP26853 Allen Wrench is also available on eBay. The listing mentions that the item may have some bends, scuffs, and scratches from storage and is sold as-is with no returns accepted.

Overall, the Delta Faucet RP26853 Allen Wrench is a specialized tool designed for Delta faucets, but it is important to ensure that you are using the correct size for your specific faucet model.

Finding Your Monitor's Size on a MacBook

You may want to see also

shundigital

Delta Faucet RP1974 Wrench

The Delta Faucet RP1974 Wrench is designed exclusively for Delta faucets. It is made to original specifications and rigorously tested to ensure quality performance. The RP1974 is a spanner wrench with a 7/8" span that is designed for use on older models that used an adjusting ring in the bonnet nut. It also provides a 1/8" Allen wrench for most single-handle set screws.

The RP1974 has received positive reviews from customers who are satisfied with its performance and quality. They mention that it works well, is handy, and is made of all-steel construction that is anodized for corrosion resistance. However, opinions are mixed on the size, as some customers have found that it doesn't fit their specific Delta faucet model.

The RP1974 can be purchased from Amazon.com and the Delta Faucet website, with prices ranging from $12.94 to $25.79. It is also available from other retailers.

shundigital

Delta Faucet RP152 Handle Set Screw

The Delta Faucet RP152 is a set screw used for replacing parts in Delta faucets. It is a genuine Delta repair part designed for use with the 140 and 142 Series 1-Handle Kitchen Faucet. The screw has a size of 1/4-28 and can be used with an Allen wrench.

The RP152 set screw is available in a chrome finish and can be purchased from various retailers, including Amazon and Home Depot. It is important to note that this particular screw may not fit all Delta faucet models, as some customers have reported that it was too large for their Delta shower valve. Therefore, it is essential to verify the correct size and compatibility before purchase.

When purchasing the Delta Faucet RP152 Handle Set Screw, it is recommended to also consider acquiring the Delta Faucet RP26853 Allen Wrench. This Allen wrench is designed exclusively for Delta faucets and can be useful for tightening or loosening the set screw. It has a size of 3/32-inch and is made to original specifications, ensuring a precise fit.

Additionally, Delta offers a lifetime limited warranty on all parts, including the RP152 set screw, providing customers with added peace of mind. This warranty covers the original consumer and ensures that any issues with the part will be addressed.

shundigital

Delta Faucet RP16497 Neostyle, Set Screw

The Delta Faucet RP16497 Neostyle set screw is a replacement part designed exclusively for Delta faucets. It is made to the original specifications and has been rigorously tested to ensure quality performance. The set screw is made of chrome-plated stainless steel and is sold by various retailers.

The Delta Faucet RP16497 Neostyle set screw is used to secure the faucet handle in place. Over time, the set screw can become loose due to regular use, and it may need to be tightened or replaced to ensure the handle is secure. This is a common issue with many faucet designs, and it is recommended to check and tighten the set screw periodically to prevent any leaks or handle wobble.

When replacing or adjusting the Delta Faucet RP16497 Neostyle set screw, it is important to use the correct size Allen key. The correct size Allen key for this particular set screw is 3/32-inch, which can be purchased separately or as part of a set. Using the correct size Allen key ensures that you can properly tighten or loosen the set screw without causing damage to the screw head or the faucet.

In addition to the set screw, Delta also offers a range of replacement parts for their faucets, including the RP25620 set screw, RP152 plumbing replacement parts, and the RP52139 set screw with an Allen wrench. These parts are readily available through online retailers and can help you maintain and repair your Delta faucet to keep it functioning properly.

Frequently asked questions

A 1/8-inch Allen key is needed for a Delta Multichoice 14 faucet.

A 3/32-inch Allen key is needed for a Delta Monitor faucet.

You can buy a 3/32-inch Allen key for a Delta Monitor faucet from Amazon or Home Depot.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment