Charging Your Powershot S110: A Step-By-Step Guide

how too charge power shot s110 camera

The Canon PowerShot S110 camera is charged using a battery charger. The camera is not sold with the battery charged, so it is important to charge the battery before first use. A full charge takes approximately 130 minutes. It is recommended to not charge the battery continuously for more than 24 hours to protect the battery and keep it in optimal condition. There are various replacement batteries and chargers available for the Canon PowerShot S110, including those from Duracell and Kastar.

Characteristics Values
Charging Time 130 minutes
Battery Life 200 shots
Battery Cell Composition 750mAh
Input Voltage USB
Dimensions 3.3" x 1.9" x 0.9"

shundigital

How long does it take to charge the Powershot S110 battery?

To fully charge the battery of your Canon PowerShot S110 camera, it takes approximately 130 minutes, or 2 hours and 10 minutes. This timing is based on information from the IXUS V review on the Digital Photography Review website.

It is important to note that the camera is not sold with the battery charged, so be sure to charge it before use. For optimal battery condition, it is recommended that you do not charge the battery continuously for more than 24 hours.

Additionally, the battery life tends to improve after a few charging cycles, and it is recommended to have spare batteries on hand.

shundigital

How to charge the Powershot S110 battery using a Duracell charger

Firstly, you will need to purchase a Duracell charger that is compatible with your Canon PowerShot S110 camera. The Duracell charger connects to a USB socket, so you can charge your camera's battery anywhere in the world.

To charge your camera's battery, follow these steps:

  • Ensure that the camera is turned off.
  • Open the battery cover on your camera and insert the battery, aligning the ▲ marks on the battery and charger, and push it in until it clicks into place.
  • Connect the Duracell charger to a power source, such as a power outlet, power bank, car USB port, or laptop.
  • Plug the included USB cable into the charger and the other end into the camera's USB terminal.
  • Charging will begin, and the charging lamp will light up.
  • Do not charge the battery continuously for more than 24 hours to protect the battery and keep it in optimal condition.
  • When charging is complete, the lamp will turn off, and you can unplug the charger and remove the battery from the camera.

By following these steps, you can conveniently charge your Powershot S110 camera battery using a Duracell charger.

shundigital

How to charge the Powershot S110 battery using a USB charger

To charge the battery of your Powershot S110 camera using a USB charger, follow these steps:

Firstly, ensure that your camera battery is inserted correctly. The Powershot S110 is typically sold without the battery charged, so it is important to charge it before use. To insert the battery, open the battery cover, align the ▲ marks on the battery and charger, and push the battery in until it clicks into place.

Next, connect your USB charger to a power source. You can use a wall outlet, your car's cigarette port, or a USB port on your computer. If using a wall outlet, simply plug the charger directly into the outlet. If using the car or a computer, you will need a USB cable.

Once your charger is connected to a power source, you can connect it to your camera. On your camera, open the *DIGITAL* terminal cover and insert the smaller plug of the interface cable into the camera terminal. Then, connect the larger plug of the interface cable to your USB charger.

Charging will begin automatically, and the USB charge lamp will light up. The lamp will turn off when charging is complete. Do not charge the battery for more than 24 hours continuously, as this may damage the battery and reduce its optimal performance.

You can also use a portable external battery charging kit, which can be connected to a wall outlet, car charger, or USB port. These kits often include LED indicators that display the charging status.

It is important to note that you cannot take photos while the camera is charging, but you can view images by turning the camera on and entering Playback mode.

shundigital

How to charge the Powershot S110 battery using a power outlet

To charge your Powershot S110 camera battery using a power outlet, first turn off your camera using the "On/Off" button or switch, depending on your model.

Next, locate the battery compartment, usually found on the underside or side of the camera. Open the compartment door by sliding it in the direction of the printed arrow. Remove the battery from the compartment, being careful not to touch the metal contacts with your fingers.

Now, take the Canon CB-2LX battery charger and remove its cover. Align the ▲ marks on the battery and charger, ensuring correct placement. Then, plug the charger into a power outlet. The charging lamp will turn orange to indicate that charging is in progress. Once the lamp turns green, your battery is fully charged and ready to be used.

Finally, unplug the charger from the power outlet and remove the battery by pushing it in. Close the battery compartment door and insert the battery back into your camera.

shundigital

How to charge the Powershot S110 battery in a car

To charge the Canon Powershot S110 battery in a car, you will need a car charger that is compatible with the camera's battery. You can purchase a dedicated car charger, or a portable external battery charging kit that includes a car charging option.

  • Prepare the Battery: Remove the battery from the camera and take off its cover.
  • Connect the Charger: If you're using a dedicated car charger, simply plug it into the car's cigarette lighter or power outlet. If you're using a portable charging kit, connect the kit to the car's power source as instructed.
  • Charge the Battery: Align the ▲ marks on the battery and charger, then insert the battery. The charging lamp should turn orange.
  • Monitor the Charging Process: Keep an eye on the charging lamp. When it turns off or changes color, the battery is fully charged.
  • Remove the Battery: Unplug the charger from the car, then remove the battery by pushing it in.

Always follow the manufacturer's instructions for charging and handling the battery to ensure optimal performance and longevity.

Frequently asked questions

A full charge takes approximately 130 minutes.

Yes, the Canon PowerShot S110 can be charged using a USB cable.

The Canon PowerShot S110 uses a rechargeable lithium-ion battery.

To extend the life of your Canon PowerShot S110 battery, do not charge it continuously for more than 24 hours. Additionally, use only the included charger or a compatible alternative, and ensure that the charger is connected to a power outlet during charging.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment