Removing The Stand From Your 27Ud68 Monitor: A Step-By-Step Guide

If you want to remove the stand from your LG 27UD68 monitor, you'll need to be careful to avoid damaging the screen. First, place the screen face down on a soft cloth to protect it from scratches. Next, use a screwdriver to turn the screw to the left and then pull out the stand base. You may need to remove a plastic flap or cap to expose the screws. Be careful not to apply excessive force when tightening or removing screws, as this may damage the monitor and will not be covered by the product warranty.

Place the screen face down

To remove the stand from your LG 27UD68 monitor, you must first place the screen face down on a soft cloth to protect it from scratches.

Next, turn the screw on the stand base to the left to loosen it. Then, pull out the stand base. You may need to use a flat-head screwdriver to help release the plastic flap from the monitor where the neck connects.

Now, pull out the screw cover to separate it from the set. Remove the two screws on the back of the stand body and disconnect the stand body from the stand hinge.

Be careful not to apply excessive force when tightening or loosening screws, as this may cause damage to the monitor, which will not be covered by the product warranty.

Protect the screen with a soft cloth

To remove the stand from your LG 27ud68 monitor, you will need to protect the screen with a soft cloth. This is an important step to prevent scratches and damage to the screen. Here is a detailed guide on how to do this effectively:

Firstly, choose a suitable soft cloth. A microfiber cloth is highly recommended for this task. Microfiber cloths are designed to be gentle on delicate surfaces like monitor screens, and they are effective at capturing and removing dust and particles. You can easily find microfiber cloths at electronics stores or online. Avoid using tissues, paper towels, or rough fabrics as they may scratch or leave particles on the screen.

Now, let's prepare the work area. Find a large, dust-free platform such as a table or desk. It is best to work indoors in a controlled environment, away from wind or fans that could blow dust onto the screen. Power down the monitor and disconnect all cables to ensure safety during the process.

Once your work area is ready, gently lay the monitor screen-side down on the soft cloth. Make sure the cloth completely covers the screen to provide a protective layer. You can also use additional cloths or towels to cover the sides and edges of the monitor for extra protection. Ensure that the monitor is stable and securely resting on the cloth.

At this point, you may proceed with the next steps of removing the stand, following the instructions provided by the manufacturer. It is important to be cautious and gentle throughout the process to avoid any potential damage to the screen or other components. Remember to keep the soft cloth in place as you work, and adjust it as needed to ensure the screen remains protected.

By taking these precautions and using a soft cloth, you can effectively protect the screen of your LG 27ud68 monitor during the stand removal process. This will help maintain the condition and appearance of your monitor, preventing scratches and other types of damage.

Turn the screw to the left

To remove the stand from the LG 27UD68 monitor, you must first place the screen face down on a soft cloth to protect it from scratches.

Now, turn the screw to the left. This will loosen the connection between the stand and the monitor. The exact location of this screw is not specified in the manual, but it is likely located at the point where the stand and monitor hinge or connect.

Once the screw is loosened, you can carefully pull out the stand base. Be cautious, as applying excessive force when detaching the stand may damage the monitor, and this type of damage is not covered by the product warranty.

After removing the stand base, you can then remove the two screws on the back of the stand body and disconnect it from the stand hinge. This will completely separate the stand from the monitor.

It is important to note that you should not carry the monitor upside down by just holding the base, as this may cause the monitor to fall off and result in potential injury. When lifting or moving the monitor, avoid touching the screen, as this can also cause damage.

Pull out the stand base

To remove the stand from the LG 27UD68 monitor, you must first place the screen face down on a soft cloth to protect it from scratches.

Next, turn the screw on the stand base to the left. Then, pull out the stand base. This will separate the screw cover from the set.

Now, you can remove the two screws on the back of the stand body. Finally, disconnect the stand body from the stand hinge.

It is important to note that applying excessive force when tightening or loosening screws may cause damage to the monitor, which will not be covered by the product warranty. Additionally, be careful not to hurt your hand on the edges of the screw covers, and do not carry the monitor upside down by just holding the base, as this could cause the monitor to fall and result in personal injury.

Remove the two screws on the back of the stand

To remove the two screws on the back of the stand of your LG 27UD68 monitor, first place the screen face down on a soft cloth to protect it from scratches. Next, turn the screw to the left to loosen it, and then pull out the stand base. Now you can remove the two screws on the back of the stand. Be careful not to apply excessive force when tightening or loosening screws, as this may cause damage to the monitor, which will not be covered by the product warranty. Also, be careful not to hurt your hand on the edges of the screw covers.

Once the screws are removed, you can disconnect the stand body from the stand hinge. This will completely separate the stand from the monitor. You can now mount the monitor on a wall or another surface.

If you are having trouble removing the stand, try using a flat-head screwdriver to carefully release the plastic flap from the monitor where the neck connects. You may not be able to remove the plastic flap just yet, but loosening it will allow you to access the screws underneath.

If you need to replace the stand in the future, simply follow these steps in reverse.

Frequently asked questions