Removing Philips Monitor Stand: A Step-By-Step Guide

If you want to remove the stand from your Philips monitor, it's important to follow the correct steps to avoid any potential damage to the screen. Firstly, place the monitor face down on a smooth, even surface, taking care to avoid causing any scratches or marks on the screen. Next, you'll need to press the locking clips to detach the base stand from the base column. Finally, press the release button to fully detach the base column from the monitor. Now you're ready to mount your Philips monitor on a wall or alternative stand.

Place the monitor face down

To remove the stand from your Philips monitor, you will need to place the monitor face down on a smooth, safe surface. This is an important step to ensure that you do not damage or scratch the screen.

When laying the monitor face down, be sure to do so on a flat surface that will not cause any damage to the screen. Take care to avoid scratching or damaging the screen and to ensure the surface is smooth. It is also important to ensure that the surface is large enough to accommodate the monitor and provide a stable base for the next steps in the process of removing the stand.

Once you have found a suitable surface, carefully lay the monitor flat, ensuring that the screen is facing downwards. Be gentle and take your time during this step to avoid accidentally dropping or knocking the monitor, which could result in damage.

With the monitor securely placed face down, you can proceed to the next steps of removing the stand. This typically involves pressing or detaching certain components, such as locking clips or release buttons, to separate the stand from the base column of the monitor.

Avoid scratching the screen

To avoid scratching the screen when removing the stand from a Philips monitor, follow these steps:

Firstly, place the monitor face down on a smooth, clean surface. Ensure the surface is completely clear of any debris that could potentially scratch or damage the screen. It is also advisable to lay down a soft cloth to provide a protective layer between the screen and the table.

Next, you will need to detach the base stand from the base column. This can be done by pressing the locking clips. Be sure to press these locking clips only, as pressing too hard on the screen can cause damage or leave marks on the plastic.

Once the base stand is detached, you can then press the release button to detach the base column. Again, be careful not to press too hard on the screen to avoid causing any damage.

If you are still having trouble removing the stand, you may need to remove the back case of the monitor to reach the screws. This can be done by carefully prying the back case off. However, this method risks damaging the plastic, so it is important to proceed with caution.

By carefully following these steps, you can remove the stand from your Philips monitor while avoiding any scratches or damage to the screen.

Press locking clips to detach

To remove the stand from a Philips monitor, you must first place the monitor face down on a smooth, flat surface, being careful not to scratch or damage the screen. Then, follow these steps:

Press the Locking Clips to Detach:

• Press the locking clips to detach the base stand away from the base column. You may need to hold the monitor stand arm with one hand and push the locking clips downward with the other to detach the monitor base from the stand arm.
• If your monitor is 27 inches, you may need to release the thumbscrew on the bottom of the monitor base before you can detach it.
• Continue to press the locking clips to fully detach the monitor base from the stand arm.

Once you have fully detached the monitor base from the stand arm, you can then proceed to press the release button to detach the base column.

Press the release button

To remove the stand from your Philips monitor, you will need to press the release button. This will detach the base column from the monitor.

Before you start, it is important to place the monitor face down on a smooth, flat surface. This will prevent any possible damage or injury and will also ensure that the screen remains scratch-free.

First, you will need to locate the release button. This is usually found on the base column of the monitor stand, often at the point where the stand attaches to the monitor. It may be labelled as a 'release button' or have a symbol indicating that pressing it will release the stand.

Once you have located the release button, you can proceed to press it. You may need to apply a small amount of force, but be careful not to press too hard as you may damage the monitor. If you are having difficulty pressing the button, try using a flat-head screwdriver or similar tool to help you apply pressure.

While pressing the release button, you may need to simultaneously pull or twist the stand to fully detach it from the monitor. Be gentle and use a slow, steady motion to avoid any sudden movements that could damage the monitor.

If you are unable to locate the release button or are having difficulty detaching the stand, refer to the user manual for your specific Philips monitor model for further guidance. Each model may have slight variations in the stand removal process, so following the instructions specific to your model is important to ensure safe and proper removal.

Pull the stand away

To remove the stand from your Philips monitor, you'll need to perform a series of careful steps to ensure the process is safe and doesn't damage the equipment. Here's a detailed guide on how to do it:

Start by placing the monitor face down on a clean, flat surface to ensure stability and protect the screen from scratches. Locate the screws that secure the stand to the monitor. Typically, there should be four screws, one at each corner of the stand's attachment to the monitor. Using the appropriate screwdriver, loosen these screws but do not remove them completely yet. Grip the stand firmly with one hand and the monitor body with your other hand. Make sure your grip is secure and comfortable. Now, pull the stand away from the monitor gently and slowly. Maintain a steady and controlled force to separate the two parts without any abrupt movements that could damage the components.

As you pull the stand away, pay attention to the alignment of the screws and the corresponding holes on the monitor. The stand should slide out smoothly and evenly. If you encounter any resistance or sticking, stop and check that the screws are loose enough and that no cables or other components are caught or tangled. Once the stand is partially removed, continue holding it firmly while also supporting the monitor to avoid any sudden shifts that could damage the connections or cause the monitor to fall. At this point, it's crucial to maintain a steady grip and controlled force to separate the stand while ensuring the stability of the monitor.

Keep pulling the stand away from the monitor until you can fully detach it. Place the stand aside in a safe place to avoid misplacing or damaging it. Now you can tighten the screws on the monitor body to secure any remaining components or covers. Ensure these screws are tight to maintain the structural integrity of the monitor. Finally, carefully turn the monitor over and lay it flat on the surface, screen-side up, to prepare for the next steps in the process of setting up your Philips monitor without the stand.

By following these detailed steps, you can safely and effectively remove the stand from your Philips monitor. Remember to take your time, use controlled force, and ensure the stability of both the stand and the monitor throughout the process. With these instructions, you can confidently detach the stand and proceed to the next steps in your monitor setup or adjustment process.

Frequently asked questions