Removing A Viewsonic Monitor Stand: A Step-By-Step Guide

Removing the stand from a ViewSonic monitor depends on the monitor type. For standard monitors, place the monitor on its side on a towel, slide the monitor base forward to access the locking tab on the sub-base, pull up on the locking tab, and slide the sub-base towards the front of the monitor. For LCD flat-screen monitors, unplug the monitor, disconnect the cables, place the monitor screen-side down on a towel, locate the locking knob on the bottom of the base, turn it counter-clockwise 90 degrees, and pull the base off. Some ViewSonic monitors have screws attaching the stand, which can be removed to detach the stand.

Unplug the monitor and lay it down on a towel

Unplugging your ViewSonic monitor and laying it down on a towel is the first step in removing the monitor stand. This process may vary slightly depending on your specific ViewSonic monitor model, but here is a general guide:

Start by unplugging the monitor power cord from the power source and disconnecting any cables connected to the computer. This ensures that the monitor is turned off and safe to work on. Place a towel on a flat surface, such as a table or a counter, to create a soft, scratch-free work area.

Next, carefully lay the monitor on its side on the towel. This step is important to prevent damage to the screen, especially if your monitor has a curved screen. You want to avoid laying the monitor screen-side down, as this could put pressure on and damage the screen.

With the monitor securely positioned on its side, you can begin the process of removing the stand. The specific steps will depend on your monitor model. For example, some ViewSonic monitors have a locking knob at the bottom of the base that needs to be turned counterclockwise to release the stand. Others may have screws at the base of the stand that need to be removed.

Once you have identified the specific mechanism for removing the stand on your monitor, follow those steps carefully. This may involve turning a locking knob, unscrewing screws, or squeezing a locking tab to release the stand. Remember to perform these actions gently and with care to avoid damaging any parts of the monitor.

By following these steps, you will be able to safely unplug your ViewSonic monitor, lay it down on a towel, and prepare it for stand removal. Just remember to identify the specific stand removal process for your monitor model before proceeding with the disassembly.

Remove the base and plastic cover

To remove the base and plastic cover from the back of your ViewSonic monitor, start by unplugging the monitor's power cord and disconnecting it from your computer. Place the monitor screen-side down on a towel or soft surface to protect the screen from scratches.

If your monitor has a locking knob on the bottom of the base, turn it counterclockwise 90 degrees and pull the base off. If not, you may need to remove a few screws to detach the base. Some ViewSonic monitors have four screws—two on each side of the stand—that need to be removed before sliding the stand out. Others have a plastic cover that needs to be popped off using a flat-tip screwdriver or similar tool, revealing the screws that hold the stand to the monitor.

Once you've removed the necessary screws, carefully lift or slide the stand away from the monitor. Be sure to keep track of the screws and store them safely so you can reattach the stand if needed.

Unscrew the screws attaching the stand

To remove the stand from your ViewSonic monitor, you'll need to first place the monitor face down on a towel or a flat surface to prevent damage to the screen.

Now, you're ready to begin the process of unscrewing the screws attaching the stand. For this step, you'll need a screwdriver. If your monitor model has a cover on the stand, use a flat-tip screwdriver to pop it off. With the cover removed, the screws that hold the stand to the monitor will be visible. The number of screws can vary depending on the model, but most ViewSonic monitors have either three or four screws attaching the stand.

Once you've located the screws, use your screwdriver to carefully unscrew them. Be gentle to avoid stripping the screws or damaging the surrounding plastic. Place the screws in a safe place so you can find them easily when you need to reassemble the stand.

With the screws removed, you should now be able to detach the stand from the monitor. In some cases, you may need to slide the stand downward to separate it from the monitor completely.

That's it! You've successfully unscrewed the screws attaching the stand to your ViewSonic monitor. Remember to handle your monitor with care and keep track of the screws to make reassembly easier.

Slide the monitor base forward to access the locking tab

To remove the stand from your ViewSonic monitor, you'll first need to unplug the monitor power cord from the power source and disconnect the monitor cables from the computer. Place a towel on a flat surface and lay the monitor on its side on the towel to avoid damaging the screen.

Now, slide the monitor base forward to access the locking tab on the sub-base. The sub-base connects to the bottom of the monitor, and the base pivots on the sub-base.

Here's a more detailed description of the process:

• Locate the locking tab: Slide the monitor base forward, revealing the locking tab on the sub-base. The sub-base is the lower part of the monitor stand that connects to the monitor, while the base is the part that sits on your desk.
• Access the locking tab: As you slide the base forward, you'll see the locking tab, which is a small tab or lever that secures the base to the sub-base. It may be located on the side or front of the sub-base, depending on your monitor model.
• Prepare for removal: Once you've accessed the locking tab, you might need to pull it up or push it forward to clear the locking tab, depending on your monitor model. This will unlock the base and allow you to slide the sub-base forward, away from the monitor.
• Confirm alignment: Before proceeding, double-check that the monitor is still securely positioned on its side on the towel. This will ensure that the screen remains protected during the stand removal process.
• Remove the sub-base: With the locking tab released, carefully slide the sub-base towards the front of the monitor. You may need to wiggle it slightly to detach it from the monitor.

By following these steps, you'll be able to successfully access and release the locking tab, allowing you to remove the monitor stand from your ViewSonic monitor.

Pull up on the locking tab and slide the sub-base forward

To remove the ViewSonic monitor stand, you must first place the monitor on a flat surface, preferably with a towel underneath to avoid damaging the screen. Unplug the monitor power cord from the power source and disconnect the monitor cables from the computer.

Now, slide the monitor base forward to access the locking tab on the sub-base. The sub-base is connected to the bottom of the monitor, and the base pivots on it. Pull up on the locking tab with your thumb, and slide the sub-base toward the front of the monitor. This action will separate the sub-base and the base from the monitor.

At this point, you can unplug the monitor power cord from the outlet and disconnect the monitor from the computer. Place the monitor screen-side down on a towel over a flat surface.

Finally, locate the locking knob on the bottom of the base and turn it counterclockwise 90 degrees with your fingers. Pull the base off the monitor, and you're done!

Please note that the above instructions are for standard ViewSonic monitors. LCD flat-screen monitors have a different process involving a base that locks onto a stem at the back of the monitor.

Frequently asked questions