Uninstalling Icatch Pc Camera: A Step-By-Step Guide

The iCatch PC Camera Console is a webcam monitoring and quick action program that can be loaded by Skype or appear by itself if it's set to load during boot-up. To remove it, you can stop it from loading by deleting it from the boot loading list. This can be done by either deleting its link from the Startup folder or finding it with the Logon tab in http://technet.microsoft.com/en-us/sysinternals/bb963902 and deleting it from there.

Removing iCatch Camera Console from the boot loading list

The iCatch Camera Console is the monitoring and quick action program for your webcam. It can be loaded by Skype or it can appear by itself if it's set to be loaded at boot. To stop it from loading, you will need to remove it from the boot loading list.

Step 1: First, you need to open the Startup Folder. You can do this by going to the Start Menu and typing "Startup Folder" in the search bar. Then, open the folder.

Step 2: Once you have the Startup Folder open, locate the iCatch Camera Console entry. It may be named something like "USB Video Camera\Monitor.exe".

Step 3: Right-click on the iCatch Camera Console entry and select "Delete". This will remove the program from the Startup Folder, preventing it from loading at boot.

Alternative Method: If you are unable to locate the iCatch Camera Console in the Startup Folder, you can use a third-party application to remove it from the boot loading list. Go to http://technet.microsoft.com/en-us/sysinternals/bb963902 and download the application. Once downloaded, open the application and locate the iCatch Camera Console entry. Then, simply delete it from there.

By following these steps, you will successfully remove the iCatch Camera Console from the boot loading list, preventing it from loading when you start up your computer.

Uninstalling the iCatch(IV) Camera Driver

To uninstall the iCatch(IV) Camera Driver, you can follow these steps:

Firstly, it is important to note that the iCatch(IV) Camera Driver is a legitimate program and is unnecessary to remove. However, if you still wish to uninstall it, you can do so through the Add or Remove Programs feature on your computer.

To do this, go to the Start Menu and search for "Add or Remove Programs." Once you have located and opened this program, scroll through the list of installed programs until you find "iCatch(IV) Camera Driver." Select this entry and click on the "Uninstall" button. Follow the on-screen instructions to complete the uninstallation process.

Another method to prevent the iCatch Camera Console from loading is to remove it from the boot loading list. This can be done by either deleting its link from the Startup folder or using the Logon tab on http://technet.microsoft.com/en-us/sysinternals/bb963902 and deleting it from there.

By following these steps, you will be able to successfully uninstall the iCatch(IV) Camera Driver from your computer.

Troubleshooting iCatch webcam errors

Understanding the iCatch Camera Console

The iCatch Camera Console is the webcam's monitoring and quick-action program. It can be automatically loaded by Skype, or it can appear by itself if it's set to load during system boot. To prevent the iCatch Camera Console from loading, you can remove it from the boot loading list. You can either delete its link from the Startup folder or use the Logon tab in http://technet.microsoft.com/en-us/sysinternals/bb963902 to find and delete it.

Dealing with Webcam Errors

If you encounter the iCatch webcam error 8007045a, it is recommended to reinstall the webcam driver. After reinstalling, your operating system may prompt you to install a new driver. Proceed with the installation and then open the webcam settings. Click on "DEVICE" and choose the "USB" mode, as the error usually indicates an issue with the "ADAPTER 01" or "ADAPTER 02".

Driver Installation Issues

If you have purchased an iCatch PC Camera and are facing issues with the driver software installation, there are a few potential solutions. First, ensure that the camera is properly connected to your computer. If the issue persists, you may need to download the appropriate driver software from the manufacturer's website or a trusted source. For example, for the iCatch (VI) PC Camera, you can try downloading the zs211 driver from a link such as http://mydownloadsunlimited.com/servers.asp?PID=ecd0e991-6082-472f-9e17-952c750c46dc&lbd=1&ts=3/3/2011%206:26:32%20AM&q=zs211%20driver%202%200%201%20zip&cr=1. Once downloaded, unzip the driver into a folder on your desktop, plug in your camera, and follow the installation prompts.

Connection Issues with iCatch IP Cameras

If you are having trouble connecting to your iCatch IP camera, you can try using the iSpy or Agent DVR software, which has built-in settings for iCatch cameras. These programs offer a setup wizard that can automatically configure your iCatch cameras. Additionally, you can try connecting via ONVIF, as iCatch cameras may support ONVIF connections.

Downloading drivers for iCatch VI PC Camera

To download drivers for the iCatch VI PC Camera, you can visit websites such as DriverGuide.com, DriverScape.com, Fixya.com, and Devid.info. These websites offer driver downloads for various operating systems, including Windows 11, 10, 8, 7, Windows Vista, and XP.

• Visit a reliable driver download website, such as those mentioned above.
• Find the download link for the iCatch VI PC Camera driver that matches your specific operating system.
• Download the driver by clicking the download button.
• Save the driver file to a location on your computer where you can easily access it, such as your desktop.
• Once the download is complete, open the Start menu and search for "Device Manager."
• In the Device Manager window, locate the "Imaging devices" or "Cameras" category and find the iCatch VI PC Camera device.
• Right-click on the device and select "Update driver" from the context menu.
• Choose the option to browse your computer for driver software.
• Navigate to the location where you saved the downloaded driver file and select it.
• Follow the on-screen instructions to complete the installation process.

It is important to ensure that you are downloading the correct driver for your operating system. Additionally, always download drivers from trusted sources to avoid potential malware or compatibility issues.

If you encounter any issues during the driver installation process, you can refer to the support pages of the respective websites or seek further assistance from online forums and communities.

Removing iCatch PC Camera Console virus/malware

The iCatch PC Camera Console is a webcam monitoring and quick action program that is loaded by Skype. It can also appear by itself if it is set to be loaded during boot. It is the window for the USB Video Camera\Monitor.exe process.

To remove the iCatch PC Camera Console virus/malware:

• Stop the program from loading by removing it from the boot loading list.
• Delete its link from the Startup folder.
• Alternatively, find it with http://technet.microsoft.com/en-us/sysinternals/bb963902 Logon tab and delete it from there.

Frequently asked questions