Keep Your Monitor Fly-Free: Simple Steps To Remove Pesky Insects

Flies are attracted to monitors because of the light they emit. If you're looking to prevent flies from approaching your monitor, you can try filling a glass with vinegar, olive oil, and fruit juice and placing it near your screen. If, however, a fly has already made its way onto your screen, you can try to guide it out by applying light pressure with your fingertip. If the fly is dead, you can use your fingertips to vibrate the screen and make it fall to the bottom. If this doesn't work, you can try using a suction cup to pull it out.

Use a suction cup to pull the screen gently and tap the monitor's side until the fly falls away

Removing a fly from your monitor can be a tricky and frustrating task. Luckily, there is a simple solution: using a suction cup. This method is particularly useful if the fly has died and become stuck behind your LCD screen, leaving an unsightly and distracting mark.

Firstly, you will need to source a suction cup. These can be purchased from hardware stores or online. A suction cup with a diameter of around 5cm is ideal. If you are in a pinch, you can try using the suction cup mount from a GPS, or even the one from the mounting bracket of your car's Garmin GPS.

Once you have your suction cup, attach it to the screen, as close to the fly as possible without covering it. Then, gently pull back on the suction cup to create some space between the screen and the display. This will give the fly the room it needs to fall away. While pulling back, gently tap the side of the monitor to encourage the fly to dislodge. It may take a few attempts, but eventually, the fly should fall away.

This method is preferable to others, such as using a torch or your fingertip to guide the fly to the edge of the screen, as it does not risk causing damage to the monitor. It is also less messy than using a mixture of vinegar, olive oil, and fruit juice to attract and trap the fly, or swatting it with a flyswatter.

Use your fingertip to apply light pressure and guide the fly to the edge of the screen

If you find yourself in the unfortunate situation of having a fly stuck inside your monitor, there is a way to guide it out without causing damage to your screen. This method requires you to use light pressure with your fingertip to block the fly's path and gently guide it to the edge of the screen. Here is a step-by-step guide to help you through the process:

• Place your fingertip approximately 1 cm away from the fly to block its path. It is important to maintain a small distance to avoid accidentally crushing the fly.
• Apply light pressure with your fingertip and gently guide the fly towards the edge of the screen. Remember to use a light touch to avoid damaging your screen.
• The best place to guide the fly is towards the bottom edge of the screen. This way, when the fly is almost out, you can carefully crush it.
• Continue applying gentle pressure and guiding the fly until it reaches the edge of the screen. Be patient as this process may take some time, and sudden movements may startle the fly or cause it to change direction.
• Once the fly is close to the edge, you can carefully increase the pressure to guide it out from under the screen.
• Finally, when the fly is fully out, crush it to ensure it doesn't find its way back onto your screen.

This method is a safe and effective way to remove a fly from your monitor without causing any damage to the screen. It may take some time and patience, but it will help you get rid of the fly and prevent any unsightly marks or damage to your monitor. Remember to maintain a gentle touch throughout the process, and you will be able to successfully guide the fly out from under your screen.

Use your phone's flashlight to force the fly to the other side of the screen

If you have a fly on your monitor, you can use your phone's flashlight to force it to the other side of the screen. This method works because flies are attracted to light.

Firstly, you will need to turn on your phone's flashlight. If you have an iPhone or iPad, swipe down from the upper-right corner of your screen to open Control Center. If your iPhone has a Home button, swipe up from the bottom of the screen. Then, tap the Flashlight button. For Android phones, swipe down from the top of your screen to open the notification panel, and tap the flashlight icon in the bottom-left corner.

Once your flashlight is on, shine it on the side of the monitor opposite to where the fly is. The fly should be attracted to the light and move towards it. Keep a safe distance between the fly and the light at first, as too much heat can kill the fly.

When the fly has moved to the other side of the screen, quickly turn off the flashlight so that the fly returns to the original side of the monitor, where you can then try to catch it. Alternatively, you can try to force the fly to the bottom edge of the screen, where it can be easily crushed.

Use a mixture of vinegar, olive oil and fruit juice to attract the fly away from the screen

To remove flies from your monitor, one method is to use a mixture of vinegar, olive oil and fruit juice to attract the fly away from the screen. Here is a step-by-step guide:

• Find a small glass or cup and fill it with vinegar, olive oil and fruit juice. The vinegar will attract the flies, while the olive oil will "jam" their wings. Fruit juice is also enticing to flies, especially something sweet like apple or grape juice.
• Place the glass or cup somewhere near your monitor. The flies will be attracted to the glass instead of your screen.
• You can also cover the glass with plastic wrap and poke small holes in the top. The flies will be able to get in but won't be able to figure out how to get out.
• If you don't want to use vinegar due to its strong smell, you can try using just fruit juice or olive oil. Fruit flies are attracted to sweet things, so juice will lure them away from your monitor.
• To make your trap even more effective, add a few drops of dish soap. The soap will trap the flies in the liquid and drown them.
• Place your trap near your monitor and wait for the flies to be attracted to it.

This method is a natural and non-toxic way to remove flies from your monitor without causing any damage to your screen.

Take the monitor apart to remove the fly

If you are looking to take apart your monitor to remove a fly, there are a few methods to try first that won't risk damaging your monitor. If the fly is still alive, try using your fingertip to apply light pressure about 1cm from the bug to guide it to the edge of the screen. Once it's at the edge, crush it. Alternatively, use your phone's flashlight to force the bug to the edge of the screen. Be careful not to get too close to the screen with the light, as the bug will die if it gets too hot.

If the bug is already dead, try using your fingertips to vibrate the screen so that it falls to the bottom of the screen and out of your sight. If this doesn't work, try using a suction cup to gently pull the screen back to create some room between the screen and display.

If these methods don't work, you may need to take your monitor apart. If you have a Cathode Ray Tube (CRT) monitor, take it outdoors and place it on the ground. You will need to discharge the stored voltage in the capacitor by placing the plug end of a lamp cord on the metal rods sticking out from the large suction cup (the capacitor) attached to the back of the display. Hold the plug against the metal rods for a moment.

To take the monitor apart, find any Phillips head screws holding the back to the front and unscrew them. Then, use a flat-head screwdriver to pry the back of the monitor off the front. From here, you can take apart any other parts you wish, such as the heat sink or CRT neck board, by removing screws or pulling off connecting plugs with pliers.

If you have a Liquid Crystal Display (LCD) monitor, place the display face down and remove any screws on the back of the monitor and near the stand. Insert the head of a flat-head screwdriver between the two halves of the monitor and carefully slide it through the gap, depressing any plastic clips holding the two halves together. Once all the clips have been disengaged, unplug the cables from the sockets on the circuit boards and inner back panel. Remove any remaining screws from the side of the inner back panel and pull it off the front display screen.

Always ground your metal equipment to remove any static electricity if you wish to use your monitor again.

Frequently asked questions