If you're looking to free up some space on your desk, mounting your LCD monitor on the wall is a great option. There are two basic types of mounts for monitors: non-invasive desk mounts that clamp onto your desk, and wall mounts.
Wall mounts are a bit more involved to install and require additional tools. You'll need to drill holes into your wall, which may not be an option if you live in a rental property. However, wall mounts offer several advantages: they don't require anything to be attached to your desk, they save a lot of desk space, and they can provide a very sturdy mounting surface if attached to a wall stud.
When choosing a wall mount, consider the weight and VESA pattern of your monitor, as well as the weight capacity and VESA compatibility of the mount. Once you've selected the right mount for your needs, follow the installation instructions carefully to ensure a safe and secure setup.
Characteristics | Values |
---|---|
Monitor weight | ≤ 10 lbs / ≤ 4.5 kg or ≤ 30.8 lbs / ≤ 14 kg or ≤ 50 lbs / ≤ 23.7 kg |
VESA hole patterns | 75x75 or 100x100mm or 200x100mm |
Monitor movement | Pivots up and down, moves up, down, left, and right |
Hardware included | VESA monitor bracket, 4 drywall anchors, 4 screws, spacers, pan head screws |
Tools required | Electronic stud finder, level, cordless drill, drill bits, pencil |
Mount type | Clamp, wall |
Mount movement | Tilt, swivel, rotate, extend, retract |
What You'll Learn
Choosing a wall mount
When choosing a wall mount, it is important to consider the size and weight of your monitor, the desired features, and the ease of installation.
First, ensure that the wall mount is compatible with the size and weight of your monitor. Most wall mounts specify a weight limit and a range of screen sizes that they can accommodate. For example, the Huanuo Computer Monitor Wall Mount is suitable for flat or curved screens ranging from 22 to 35 inches in size and weighing up to 26.4 lbs.
Next, consider the features that are important to you. Some wall mounts offer full-motion adjustability, including tilt, swivel, rotation, and extension capabilities, while others have more limited movement. For instance, the WALI TV Wall Mount Articulating LCD Monitor Full Motion offers a wide range of motion, including tilt, swivel, and extension up to 15 inches. In contrast, the MOUNT PRO Single Monitor Wall Mount has a more limited range of motion but still allows for tilt and swivel adjustments.
Additionally, pay attention to the VESA compatibility of the wall mount. VESA standards refer to the distance in millimetres between the mounting holes on the back of your monitor. Common VESA sizes include 75x75mm, 100x100mm, and 200x100mm. Ensure that the wall mount you choose is compatible with the VESA size of your monitor.
Finally, consider the ease of installation. Some wall mounts come with all the necessary hardware included, while others may require additional tools and equipment. For example, the Amazon Basics Wall Mount Computer Monitor includes instructions and hardware for a simple set-up process. In contrast, installing the Huanuo Dual Monitor Wall Mount requires additional tools such as a stud finder, a level, a cordless drill, drill bits, and a pencil.
By considering these factors, you can choose a wall mount that is compatible with your monitor, offers the desired features, and can be installed with the necessary tools and expertise.
Monitoring Home WiFi Usage: An Xfinity User's Guide
You may want to see also
Finding the right spot
The first step in mounting an LCD monitor on a wall is deciding where you want it to go. Consider the height you want the monitor to be at—for example, you might want it higher up to help your neck and back while working. You should also make sure you know the location of any electrical cables or pipes in the wall so that you can avoid drilling into them.
Once you have a general idea of where you want the monitor to go, use the mounting plate and a water level to mark out the exact locations for drilling. If your mounting kit didn't come with a cardboard pattern for the holes, you can use the mounting plate to mark out the spots.
When you've found the right spot, make sure it's level by drawing a vertical line down the wall and using a level to ensure the mount will be straight.
Choosing the Right Screws for VESA Monitor Mounts
You may want to see also
Drilling into the wall
Firstly, ensure you have the right tools and materials. You will need a drill, drill bits, a stud finder, a level, and a pencil. The mount should come with screws and washers, as well as plastic anchors.
Next, find a stud in the wall to drill into. A stud finder will help you locate this; simply swipe it across the wall until you find one, and mark the centre with a pencil.
Then, use the level to draw a vertical line down the wall, using the centre point of the stud as a guide. This will ensure your mount is straight.
Now, mark the holes that need to be drilled. You can use the mount's cardboard pattern to do this, aligning it with the level and marking the holes with a pencil.
Drill the holes with your drill, using the required drill bit size. For the Huanuo Dual Monitor Wall Mount, a 5/16 drill bit is specified.
After drilling, screw the mount to the wall. You may need to attach washers to the lag screws, as in the example of the Huanuo mount. Ensure the mount is level before fully tightening the screws.
Finally, attach the VESA mount to the back of your monitor.
Las Cruces LCD Monitor Disposal Guide
You may want to see also
Attaching the mounting plate
Firstly, you will need to remove the screen mounting plate from the holder and attach it to the back of your monitor using the provided screws. The length of the provided screws may be too big, so consider using double washers on each to fit the screw into the inserts on the monitor. Make sure the mounting plate is secure before proceeding to the next step.
Next, loosely tighten all the screws on the mounting plate and use a water level or a regular level to check that it is vertical. Once you are satisfied with the placement, tighten the screws all the way to ensure a snug fit.
Finally, hang the monitor by mounting the mounting plate together with the monitor using the single bolt on the back. This step may require some alignment, as you will need to line up the plastic washers with the holes.
And that's it! You have successfully attached the mounting plate and are now ready to hang your LCD monitor on the wall.
Monitoring Bandwidth Usage: A Guide for Cisco Routers
You may want to see also
Securing the monitor
Prepare the Monitor Hardware:
The first step is to detach the stand from the back of your monitor. This will expose the holes or inserts where the monitor will be attached to the wall mount. Depending on the model of your monitor, you may need to remove screws or use a push-button to release the stand. Once the stand is removed, make sure you have the necessary screws or bolts to secure the monitor to the wall mount. Some wall mounts come with screws, but it's always good to have extras in case they don't fit your monitor.
Attach the VESA Mounting Bracket:
The VESA mounting bracket, also known as the monitor bracket, is the part that will connect your monitor to the wall mount. It typically has multiple holes that align with the holes on the back of your monitor. Place the VESA mounting bracket on the back of your monitor and secure it in place using the provided screws or bolts. Make sure they are tightened securely, but be careful not to overtighten and strip the threads.
Connect the Monitor to the Wall Mount:
With the VESA mounting bracket securely attached to your monitor, you can now connect the monitor to the wall mount. Carefully lift your monitor and align the holes on the VESA mounting bracket with the corresponding holes or slots on the wall mount. Again, use the provided screws or bolts to securely fasten the monitor to the wall mount. Ensure that the connection is tight and that the monitor does not wobble or move when pushed gently.
Cable Management:
Now that your monitor is securely attached to the wall, it's time to manage the cables. Use cable ties or clips to neatly organize the power and display cables. Route the cables along the wall mount and down towards the power outlet or your desk. This step not only makes your setup look neat and tidy but also ensures that the cables are safely secured and out of the way.
Final Adjustments and Testing:
Once everything is connected and secured, take a step back and ensure that your monitor is level and positioned at the desired height. Make any necessary adjustments to the tilt, swivel, or rotation of the wall mount according to your preferences. Plug in the power and display cables, turn on your monitor, and test it to ensure it is functioning properly.
By following these steps, you can securely mount your LCD monitor on the wall, creating a sleek and ergonomic setup while reclaiming valuable desk space. Remember always to refer to the specific instructions provided with your wall mount and monitor for the best results.
Adjusting Monitor Edges: Calibration Tips for Perfect Screen Alignment
You may want to see also
Frequently asked questions
You will need a few tools, including an electronic stud finder, a level, a cordless drill, drill bits, and a pencil.
When choosing a wall mount, consider the size and weight of your monitor, as well as the VESA pattern on the back of the monitor. Also, decide whether you want a fixed or adjustable mount.
First, find a stud in your wall using a stud finder. Mark the centre of the stud with a pencil and use a level to draw a vertical line. Mark the holes to be drilled, then drill the holes using a drill bit of the appropriate size. Screw the mount to the wall, ensuring it is level. Attach the VESA mount to the back of your monitor, then hang the monitor on the wall mount.