Polaroid One600: Battery Installation Guide

The Polaroid OneStep 600 is an instant camera that was sold between 2004 and 2008. It is known for its user-friendliness and lack of setting options. The camera has a built-in flash and a special lens for close-up photos. The battery for the Polaroid OneStep 600 is located within the film pack, which contains enough power for ten shots. To change the battery, you must replace the film pack.

The battery is located in the film pack

The Polaroid OneStep 600 camera is powered by a battery located within its film pack. This means that the camera does not have its own power source and requires a film pack to operate. Each film pack contains a fresh battery that provides enough power for approximately ten shots. Therefore, if your Polaroid OneStep 600 is not turning on, it is likely due to a dead battery in the film pack rather than an issue with the camera itself.

To confirm if the battery in your film pack is functional, you can perform a simple test. Remove the film pack from the camera and wait for about 10 seconds. Then, reinsert the film pack and close the door. If you hear the camera making sounds, the battery in the film pack is still good. However, if the camera remains silent, it indicates that the battery in the film pack is dead.

In the case of a dead battery in your film pack, you have a few options to address the issue. One option is to purchase a new film pack, as each new pack comes with a fresh, powerful battery. You can buy new Polaroid film packs directly from the Polaroid website or from other retailers like Amazon.

Another option to deal with a dead battery in the film pack is to transfer the film to a new cartridge with a working battery. This process requires practice and must be done in complete darkness to avoid exposing the film to light. You can follow the detailed instructions provided by Dan Finnen on his website, danfinnen.com, which outline the steps for transferring film from a dead cartridge to a new one.

It is important to note that simply changing the battery inside a film pack is not a feasible option. The batteries used in these film packs are early types of small footprint batteries, such as polapulse batteries, which are no longer produced or easily accessible. Therefore, the recommended approach is to purchase new film packs or perform the film transfer process as described above.

The camera won't work without a film pack

The Polaroid OneStep 600 camera is a battery-powered device that uses film packs for capturing and developing pictures. The camera's functionality is dependent on the film pack, which serves as the power source and contains the film required for capturing images.

If your Polaroid One600 camera is not working, it may be due to a dead battery in the film pack. The camera relies on the battery within the film pack to operate, and a depleted battery can render the camera inoperable. To resolve this issue, you'll need to replace the film pack with a new one that contains fresh batteries. Ensure that you purchase film packs specifically designed for the Polaroid One600, as other types may not be compatible.

When purchasing film packs, look for Polaroid 600 Film packs, which are compatible with the One600 camera. These film packs contain a small battery that provides enough power for approximately ten shots. Newer film types, such as the i-type film packs, do not include batteries, so they will not work with the One600 camera without modification.

It's important to note that simply changing the film pack in your Polaroid One600 camera may not always solve the issue. In some cases, the problem may lie with the camera itself. If you've replaced the film pack with a fresh one and the camera still doesn't work, you may need to troubleshoot the camera or consider professional repair services.

Additionally, when working with film packs, be cautious not to expose the film to light during handling or transfer between cartridges. Always handle the film in a darkroom or a dark bag to avoid light leaks that could damage the film.

Buy 600 film packs for the One600

To use your Polaroid One600 camera, you will need to buy 600 film packs. The camera is powered by a battery included in each film pack, so a new film pack means a new battery.

You can buy 600 film packs from a variety of retailers, including Polaroid's website, Amazon, Best Buy, and Walmart.

Polaroid Color Film for 600 x40 Pack, 40 Photos (6013)

This film pack is available on Amazon and includes 40 classic white-framed photos for 600 cameras and I-type cameras. It is priced at $73.95, but prices may vary depending on the seller.

Polaroid Color Film for 600 - Double Pack

This double pack is available at Walmart and includes 16 instant photos. It is priced at $19.98.

Polaroid Color Film for 600 - 5 Pack (40 Photos) (6013)

This 5-pack is available at Walmart and includes 40 photos. It is currently priced at $89.99.

Polaroid Color Film for 600 - Round Frame

This film pack is available at Walmart and includes round-framed photos. The price is listed as $21.08.

Polaroid Color Film 600 40x Pack - White

This film pack is available at Best Buy and includes 40 instant photos in colour. It comes with five individually wrapped packs in one box, so your film stays fresh. The price is listed as $73.95, but it may vary depending on the seller.

Polaroid 600 Film Double Pack

This double pack is available at Best Buy and includes 16 instant photos in colour. The two packs come individually wrapped in a single box, so they stay fresh until you're ready to use them. The price is not listed, but reviews mention a lower price than buying two single packs.

Make sure to store your film properly to keep it in good shape. Polaroid recommends storing film in the fridge (not the freezer) to keep it fresh, and allowing it to reach room temperature before loading it into your camera.

Now that you know where to buy 600 film packs for your One600, you can start capturing memories on film!

How to change the film pack

To change the film pack in a Polaroid One600 camera, follow these steps:

Firstly, ensure you are using Polaroid 600 film. Check the film specifications on the back of the box to make sure you are using a compatible product. SX-70 Polaroid film and Image/Spectra film will not work with a 600-series camera. The Impossible Project is currently the only company manufacturing film for classic Polaroid cameras, so look for new 600 film under this brand.

Next, open the film pack. Remove the film cartridge from the box and unwrap the sealed foil package. Hold the pack by its sides to avoid putting any pressure on the film itself. Be careful not to touch the dark slide—the sheet that protects your film from premature exposure. Depending on the film type and packaging, you may need to carefully tear through several layers of boxes and/or foil.

Now, open the camera's film compartment. Pull the switch on the side of the camera, below the red shutter button. This should pop open the bottom front flap of the device. Look for a slot where you can insert and remove film.

If there is existing film in the camera, remove it. If you are using a classic Polaroid, there may already be a cartridge loaded. If you want to preserve any photographs on the existing film, remove the cartridge in a darkroom or pitch-black space, then store it in a box or bag where it will not be exposed to UV light. If you don't need the existing film, simply pop out the cartridge and throw it away.

Now you can load the new film cartridge into the camera. Hold it by the sides, then slide the film into the film compartment. The cartridge should slide in easily and pop securely into place. The metal contacts should be facing down, the dark slide should be facing up, and the tab should be facing out of the camera slot towards you.

Finally, close the camera. Once the film is inserted, shut the film compartment. The dark slide should automatically eject from the front of the camera. Once the dark slide has emerged, you are ready to start shooting!

The camera is now ready for operation

Now that you have inserted the film pack into your Polaroid One600, you are almost ready to start taking pictures. The camera is now powered up and operational.

The Polaroid One600 is an instant camera, which means that it is very easy to use. The camera has a fixed lens, so there is no zoom function. It also does not have a self-timer, light/dark control, or a mode for avoiding red-eye. The flash is automatic and has a range of three meters.

To take a picture, simply look through the viewfinder and press the shutter release button on the side of the camera. The camera will then transport the image from the film cassette, and development will begin. After a few minutes, the development will be complete, and you will be able to view your picture.

The Polaroid One600 is a great camera for weddings, parties, or vacations. It is user-friendly and can be operated by anyone. So go out and capture some memories!

Frequently asked questions