Charging The Xp Waterproof Camera: A Step-By-Step Guide

The Fujifilm FinePix XP140 is a waterproof digital camera that can be charged by connecting the camera to the supplied AC power adapter using the supplied USB cable. The battery takes about 4 hours 30 minutes to fully charge. The camera can also be charged by connecting it to a computer using a USB cable. The camera will not charge if it is turned on.

Charging the Fujifilm XP waterproof camera using a USB cable

To charge your Fujifilm XP waterproof camera using a USB cable, follow these steps:

Firstly, ensure that you have the correct USB cable for your specific Fujifilm XP camera model. The camera uses an NP-95 rechargeable battery, which takes about 4 hours and 30 minutes to fully charge. You can purchase a replacement battery and charger from Fujifilm or a third-party supplier. When purchasing a third-party charger, make sure to check the compatibility with your specific camera model.

Once you have the correct USB cable, follow these steps:

• Connect the USB cable to the camera: Insert the USB cable into the corresponding port on your camera, ensuring that the connectors are in the correct orientation and fully inserted.
• Connect the USB cable to a power source: You can connect the other end of the USB cable to a computer, a USB wall charger, or a power bank. If using a wall charger, simply plug it into an indoor power outlet. If using a computer, connect the USB cable directly to the computer's USB port, not through a USB hub or keyboard.
• Allow the battery to charge: The camera will now be charging. The battery status icons on your camera will indicate the charging status when the camera is turned on.
• Charging time: A full charge typically takes about 4 hours and 30 minutes. This time may vary depending on the temperature and the age of your battery.
• Charging precautions: Do not use the camera while charging. Ensure that the battery terminals are clean and free of dirt or debris. Do not affix stickers or other objects to the battery, and do not short the battery terminals to avoid overheating.
• Charging via a computer: If you are charging via a computer, note that the computer must be on and out of sleep mode for the charging to work. Also, charging may be impacted by the computer's specifications, settings, or conditions.

By following these steps, you can effectively charge your Fujifilm XP waterproof camera using a USB cable, ensuring that your camera is ready for your next adventure.

Charging the camera via a computer

To charge your Fujifilm XP waterproof camera via a computer, you will need a USB cable. The camera uses an NP-95 rechargeable battery. The charging time is approximately 120 minutes, but this may increase at very low or high temperatures.

First, turn the camera off. Then, insert the battery into the camera and connect the USB cable, ensuring the connectors are fully inserted. The camera will now be charging.

You can also charge the camera using the supplied AC power adapter. Attach the plug adapter to the AC power adapter, ensuring it is fully inserted and clicks into place. Then, plug the AC power adapter into an indoor power outlet.

Note that the camera will not charge while it is turned on.

Battery charging time and status

The Fujifilm FinePix XP140 is a waterproof digital camera that comes with a battery, a charger, and a USB cable. The camera is supplied with an NP-45S rechargeable battery.

The charging time for the battery is about 4 hours and 30 minutes. The charging time is not affected by the type of cable used. The battery can be charged by connecting the camera to the supplied AC power adapter using the USB cable. The camera can also be charged by connecting it to a computer. The camera will not charge if it is turned on. The charging status is shown by the indicator lamp.

The battery should be charged one or two days before use. The battery gradually loses its charge when not in use. The battery should be removed from the camera before charging. The camera should be turned off before charging the battery. The camera operates in external power mode if it is turned on while plugged into the AC power adapter with the battery inserted.

Removing the battery

To remove the battery from your Fujifilm FinePix XP70 camera, start by powering off the camera. Leaving the camera on while removing the battery may result in electrical shock or permanent data loss.

Once the camera is off, open the battery compartment by pushing down on the center button and turning the dial on the side counterclockwise. You should then see an orange tab. Pull this tab towards the hinge to release the battery.

If you have a Fujifilm FinePix XP140, the process is slightly different. First, make sure the camera is turned off. Then, open the battery-chamber cover by keeping the safety lock pressed and rotating the latch. Before opening the cover, use a soft cloth to remove any water droplets or foreign matter from the camera. This is important to prevent damage to image files or memory cards.

With the cover open, press the battery latch to the side and slide the battery out of the camera. Be cautious, as the battery may be hot if it has been used in high-temperature environments.

Always remember to handle your camera's battery with care and follow the manufacturer's instructions to ensure safe and proper removal.

Battery replacement

To replace the battery of your Fujifilm FinePix XP camera, follow these steps:

• Power off the camera. This is important to prevent electrical shock or permanent data loss.
• Push down on the centre button and turn the dial on the side counter-clockwise to open the battery compartment.
• Pull the orange tab towards the hinge to release the battery.
• Reinsert a new battery of the same model, ensuring it is compatible with your specific camera model.
• Close the battery compartment by turning the dial clockwise until it clicks into place.

You can purchase replacement batteries and chargers from online retailers such as Amazon and eBay. When purchasing, ensure the battery model is compatible with your specific camera model. Some common battery models for the Fujifilm FinePix XP series include NP-45, NP-45A, NP-45B, and NP-45S.

It is recommended to refer to your camera's user manual for specific instructions and safety information related to battery replacement.

Frequently asked questions