Charging Your Link-S Lte Camera: A Quick Guide

The SPYPOINT Link-Micro-S-LTE is a trail camera that can be charged via solar power or using a rechargeable lithium battery pack. The solar panel is integrated into the camera, while the battery pack is sold separately. The camera offers a mobile scouting solution for hunters, allowing them to receive photos and data directly to their phones. The setup process is straightforward and can be done via the SPYPOINT mobile app. While the camera has received mixed reviews, some users have praised its ease of setup, good picture quality, and value for money. However, others have reported issues with connectivity, battery life, and water resistance.

Charging with a solar panel

The SPYPOINT Link-Micro-S-LTE trail camera features integrated solar panel technology, which can be used to charge the included LIT-10 rechargeable lithium battery pack. This technology saves the user the expense of batteries and the time and money spent travelling to change them.

To charge the camera with a solar panel, follow these steps:

• Choose the carrier model that offers the best coverage at your desired location.
• Download the SPYPOINT mobile app.
• Follow the "activate new camera" prompt in the app.
• Install the SD card and batteries.
• Position the camera in a location with access to direct sunlight. The amount of sunlight the solar panel receives will determine how quickly the battery charges.
• Allow the solar panel to charge the battery. The time this takes will depend on various factors, including the amount of sunlight the panel receives and the current battery level.

It is important to note that the solar panel may not always be able to provide a full charge to the battery, especially in locations with limited sunlight. In such cases, you may need to supplement the solar charging with an alternative charging method, such as using a charging cable connected to a power source.

Additionally, while the solar panel can extend battery life, it is recommended to have a backup charging option in case of extended periods of low sunlight or if you plan to use the camera in high-traffic areas.

Charging with a rechargeable lithium battery pack

The SPYPOINT Link-Micro-S-LTE trail camera comes with a rechargeable lithium battery pack called the LIT-10. This battery pack can be charged using the integrated solar panel technology, saving you the expense and hassle of buying and replacing batteries.

• Ensure that you have purchased the SPYPOINT Link-Micro-S-LTE trail camera, which includes the LIT-10 rechargeable lithium battery pack.
• Install the LIT-10 battery pack into your Link-S LTE camera.
• Place your camera in an area with direct sunlight to utilise the integrated solar panel technology. The solar panel will absorb sunlight and convert it into electrical energy, charging the LIT-10 battery pack.
• Alternatively, you can purchase a separate solar panel, such as the SPYPOINT Solar Panel, to charge the LIT-10 battery pack. This option allows you to keep your camera in a shaded area while charging the battery.
• If you don't have access to sufficient sunlight, you can also charge the LIT-10 battery pack using a power outlet. Connect the provided charging cable to the battery pack and plug the other end into a wall outlet.
• Allow sufficient time for the battery to charge. The charging time will depend on various factors, including the intensity of sunlight and the capacity of the battery pack.
• Once the battery is fully charged, your Link-S LTE camera will be ready for use. You can now install or reposition your camera to begin capturing images or videos.
• It is recommended to position your camera in an area with good cellular coverage to ensure efficient data transmission.
• You can also take advantage of SPYPOINT's photo transmission plans, which offer affordable options for receiving images directly to your mobile device.
• Remember to regularly monitor the battery level and adjust your camera's settings to optimise battery life.

By following these steps, you can effectively charge your Link-S LTE camera using the rechargeable lithium battery pack and integrated solar panel technology, reducing the need to frequently replace disposable batteries.

Charging with AA non-rechargeable lithium batteries

The SPYPOINT Link-Micro-S-LTE trail camera comes with a rechargeable lithium battery pack called the LIT-10. This battery can be charged using the camera's integrated solar panel, saving you the cost and hassle of buying and replacing disposable batteries.

However, it's important to note that the Link-Micro-S-LTE does not have a battery tray for backup batteries. This means that if your battery pack dies, you'll need to wait for the solar panel to recharge it or take the camera home and charge it yourself. SPYPOINT does not currently sell individual battery packs separately, which can be inconvenient if your camera is placed in a remote location.

Some users have reported issues with the battery life of the Link-Micro-S-LTE, with the camera dying in less than two months in some cases. Others have found that the solar panel effectively extends the battery life, even in mostly shady spots.

It's worth mentioning that attempting to recharge non-rechargeable lithium batteries is not recommended and can be dangerous. Always use rechargeable batteries or the included LIT-10 battery pack with your SPYPOINT Link-Micro-S-LTE camera.

Charging with a 12V battery

The SPYPOINT KIT-12V Rechargeable Battery with Power Supply Kit 7.0Ah Battery Charger Kit is a great option for charging your LINK-S LTE camera with a 12V battery. It comes with a 12V 7.0Ah rechargeable battery, a water-resistant ABS plastic case, an AC charger, a 12 ft. outdoor power cable, and a carrying strap. It is compatible with all SPYPOINT cameras equipped with a 12V power jack.

Another option is to use the Spypoint CB-12FT 12V Power Cable with alligator clips to connect any 12V battery to your LINK-S LTE camera. This cable is 12 ft. long and comes with a 2 amp fuse to prevent overloading your camera.

You can also consider purchasing a solar panel to charge your 12V battery. The Spypoint Solar Panel SPLB-22, for example, has a 15,000 mAh battery capacity and comes with 12V, 9V, and 6V power outlets and a DC charger.

Finally, make sure to follow the safety precautions when handling and charging your 12V battery to avoid any potential hazards.

Charging with a power source

The SPYPOINT Link-Micro-S-LTE camera can be charged using a power source such as the SPYPOINT LIT-10 rechargeable lithium battery pack. This is included with the camera and can be charged using the integrated solar panel. The solar panel is built into the camera and can extend battery life.

To charge the camera using the solar panel, follow these steps:

• Install the SPYPOINT LIT-10 rechargeable lithium battery pack into the camera.
• Place the camera in an area with access to sunlight. The solar panel will automatically charge the battery.
• You can also improve charging by adjusting the camera's angle to maximize sunlight exposure.
• Ensure that the camera's lens and solar panel are clean and free of obstructions for optimal charging.

In addition to the solar panel, you can also charge the camera using AA non-rechargeable lithium batteries. Here's how you can do it:

• Unlock the latch and open the camera door.
• Remove the battery compartment by grasping the small notches on the side and pulling it out.
• Insert brand new AA lithium batteries, following the polarity (+) and (-) indications.
• Place the battery compartment back into the camera and close the door.

By using either the solar panel or AA lithium batteries, you can ensure your SPYPOINT Link-Micro-S-LTE camera stays powered and ready for use.

Frequently asked questions