Charging The Canon Powershot A620: A Quick Guide

The Canon PowerShot A620 is a versatile digital camera with a 7.1-megapixel CCD sensor, a 2.0-inch vari-angle LCD display, and 4x optical zoom. It offers full manual control and 20 shooting modes, including Portrait, Landscape, Night Scene, and My Colors. The camera is powered by four AA batteries and supports SD and MultiMedia memory cards.

To charge the camera, insert four AA batteries according to the diagram printed on the device. You can use alkaline or rechargeable NiMH batteries. Additionally, you can purchase a separate battery charger to recharge NiMH batteries.

How to open the battery door

To open the battery door of your Canon PowerShot A620 camera, follow these steps:

First, locate the tab on the battery door. While pushing the battery door away from you, slide the tab. You may need to use your thumb to pull the door open as you move the latch. It requires a kind of sliding motion, and the battery door should pop open.

If you are having trouble opening the battery door, try jiggling it a little. Ensure that you are not only moving the switch but also pulling the door open with your thumb. If your camera is in good condition, the problem is unlikely to be due to dirt or rust.

How to insert batteries

To insert batteries into your Canon Powershot A620 camera, follow these steps:

• Open the battery door by sliding the tab while pushing the door away from you. The door should pop open.
• Insert four AA batteries, following the diagram printed on the camera.
• Close the battery door.

Your camera can use either alkaline or rechargeable NiMH batteries.

How to charge the batteries

To charge the batteries of your Canon Powershot A620 camera, follow these steps:

Step 1: Open the battery door

Using your thumb, slide the tab on the battery door while pushing it away from you. The battery door should pop open.

Step 2: Insert the batteries

Insert four AA batteries into the camera, following the diagram printed on the device. The camera supports NiMH and alkaline batteries.

Step 3: Close the battery door

Close the battery door and turn on your camera.

Your Canon Powershot A620 is now ready to use.

Tips for extending battery life:

• Use rechargeable NiMH batteries.
• Carry spare batteries with you when travelling or during extended photo shoots.
• When not in use, remove the batteries from the camera to avoid leakage and corrosion.
• Avoid extreme temperatures, as this can impact battery performance and longevity.
• Consider purchasing a battery charger to recharge your batteries efficiently.

How to replace the motherboard battery

To replace the motherboard battery of your Canon PowerShot A620 camera, follow these steps:

Firstly, ensure that the camera is turned off. Then, slide the tab on the battery door while pushing the door away from you. The battery door should pop open.

Next, locate the motherboard battery. According to a comment on the iFixit website, the motherboard battery is behind the display.

Once you have located the battery, you can remove it by hooking your nail onto the battery holder and lightly pulling up. Then, remove the battery holder in the direction indicated by the arrow. Take out the battery by pulling it up in the direction indicated by the arrow.

Insert a new battery, ensuring that the negative side is facing up. Then, replace the battery holder and close the battery door.

Finally, when the Date/Time menu appears on the camera, set the date and time.

Please note that the first motherboard battery may deplete quickly as it is installed at the point of manufacture, not when you purchase the camera.

How to charge the camera using a USB

To charge your Canon PowerShot A620 camera using a USB, you will need a USB data sync cable, such as the Interface Cable IFC-600PCU (sold separately). This cable is compatible with your camera and will allow you to charge it via a computer.

• Ensure that you have the correct USB cable, such as the Interface Cable IFC-600PCU.
• Connect the larger plug of the USB cable to a USB terminal on your computer. Refer to your computer's user manual for more details on USB connections.
• With the camera turned off, open the cover near the camera terminal.
• Insert the smaller plug of the USB cable fully into the camera terminal, ensuring it is in the correct orientation as shown in the user manual.
• Charging will now begin, and the indicator on the back of the camera will blink in green.
• Charging will take approximately seven hours to complete. However, if you import images from your camera to your computer during this time, the charging may take longer.
• The indicator will continue to blink in green even after charging is finished, as long as the camera remains connected to the computer.
• To stop charging, simply press the power button to turn off the camera.

Please note that some computers may require a memory card to be inserted in the camera for the battery charging to work. Additionally, you cannot use the camera to take pictures while it is charging.

Always refer to the user manual for specific instructions related to your Canon PowerShot A620 camera.

Frequently asked questions