Charging Your Xiaomi Yi Camera: A Quick Guide

The Xiaomi Yi camera is a popular device for capturing photos and videos, but how do you ensure it stays charged for optimal performance? When it comes to charging the Xiaomi Yi camera, there are a few methods you can use. Some users recommend charging via a USB cable connected to a power adapter or a PC, while others suggest using a mobile phone charger with a micro USB connector. It's important to note that Xiaomi recommends using a 5V/1.5A charger or a 1A charger as per the instruction booklet. The charging time may vary depending on the charger used, and it's always recommended to power off the camera during charging to avoid overheating.

How to charge the Xiaomi Yi Camera

Charging the Xiaomi Yi camera with a PC

To charge your Xiaomi Yi camera with a PC, first power off the camera. Then, use a USB cable to connect the camera to the PC. You can also connect the camera to an external power source, such as a mobile power charger. It is recommended to use the official adapter provided with your camera. When the power indicator light is off, this means that your camera is fully charged, and you can disconnect the USB cable.

The time it takes to fully charge your camera battery depends on several factors, including the power source you are using and the battery capacity. On average, it should take around 3 hours for an empty battery to reach a full charge.

It is important to note that you should only use the official charger or recommended adapters to avoid damaging your camera. The recommended chargers have a 5V/1.5A or higher capacity. Using a charger with a higher amperage, such as 2A, will not damage the camera, but it is also not necessary, as the camera will only draw the amount of power it needs.

Additionally, it is normal for the camera to get warm during charging, but if it becomes too hot to touch, something may be wrong, and you should stop charging it.

Using a wall travel adapter

To charge your Xiaomi Yi camera using a wall travel adapter, follow these steps:

First, ensure that your camera is powered off. This is important because charging the camera while it is on can cause issues with the battery and overall performance.

Next, take your USB cable and connect it to the wall travel adapter. The official Xiaomi Yi camera box includes a USB cable, but any standard USB cable should work. If you are using a different USB cable, ensure it is compatible with your camera model. Connect the USB cable to the charging port on your camera. The charging port is typically located on the side or bottom of the camera, depending on the model.

Once the camera is connected to the adapter, plug the adapter into a wall outlet. The wall travel adapter should have an input voltage range of 100-240V AC, which is standard for most electrical outlets worldwide. The output voltage of the adapter should be 5V, and the output current should be 1.5A or more, as recommended by Xiaomi. Using an adapter with a higher output, such as 2A, will not damage the camera but may cause it to wear out faster.

You can determine if your camera is charging by observing a power indicator light. This light should turn off once the camera is fully charged. The charging time for the Xiaomi Yi camera is approximately 90 minutes, but this may vary depending on the battery size and the adapter's output current.

It is important to note that some users have reported issues with their cameras not charging properly. If you encounter any problems, try using the official Xiaomi adapter or a different charging method, such as charging via a PC or mobile power charger. Additionally, always handle your camera and charger with care to avoid any damage or overheating.

The correct voltage and amp requirements

The Xiaomi Yi camera can be charged using a USB cable connected to an adapter, power charger, PC, or power bank. The camera's power supply is 5V 2.0A, and it is recommended to use adapters with 5V/1.5A or more. The official Xiaomi website recommends using a 1A charger, and some users have reported using a 2A charger without any issues.

When charging the camera, it is important to ensure that the correct voltage and amp requirements are met to avoid any potential damage to the device. The camera's battery is a 4.2V battery, and it is essential to use a charger that matches this voltage. Small voltage variations are common, and most consumer electronics, including the Xiaomi Yi camera, are built to handle these variations without any issues.

Using a charger with a higher amperage than the recommended 1.5A, such as a 2A charger, will not cause damage to the camera. However, it may be a waste of money as the camera will only draw the amount of power it needs, which is typically 1A or less. Additionally, it is important to note that the camera may get warm during charging, but this is normal and should not cause any concern unless it becomes too hot to touch.

To ensure the safest and most efficient charging method, it is recommended to use the official Xiaomi adapter or a charger with the specified voltage and amp requirements of 5V and 1.5A or more. This will ensure that the camera charges properly without any risk of overheating or damage.

How to charge without the official Xiaomi charger

If you don't have the official Xiaomi charger, you can use a USB cable to connect your camera to an adapter or external power source such as a mobile power charger or PC.

It is recommended to use a 5V/1.5A adapter or higher, and a 1A charger is also suitable. A 2A charger will not damage the camera but is unnecessary.

You can also charge your camera through a USB car charger, a power bank, a solar panel battery bank, or a 10ft USB A Male cable.

If you are using a power bank, ensure it has a 5V and 1A output or more.

If you are using a PC, charging will be slower, and you will need to use a USB 3.0/USB3.1 hub as USB 2.0 has a "500mA current" limitation.

What to do if the camera is not charging

If your Xiaomi Yi camera is not charging, there are several troubleshooting steps you can take to attempt to resolve the issue.

Firstly, check if the battery is placed properly and ensure that the pins on the battery align with the pins of the camera. If the battery is not seated correctly, the camera may not charge properly.

Next, verify that the adapter is properly connected to the camera. Use the official adapter provided by Xiaomi, as using unofficial adapters may pose safety hazards and could damage your camera. Also, check if the camera is already fully charged, as some cameras will not charge once they reach full capacity.

If the issue persists, try plugging the camera into a different power source, such as a computer or a different AC adapter, using a micro USB cable. This will help you determine if the problem lies with the power source or the camera itself. If the camera still does not charge, the micro USB cable you are using may be broken, so try using a different cable.

In some cases, the issue could be related to a faulty battery. If you have access to an extra battery, try swapping them out to see if that resolves the charging issue. If none of these steps work, the problem may lie with the camera's motherboard, and you may need to consider replacing it.

Frequently asked questions