Charging Your X10 Camera: A Step-By-Step Guide

The Fujifilm X10 camera uses an NP-50 rechargeable battery. The battery is not charged at shipment, so it is important to charge it before use. The charging time for the battery is around 4 hours and 30 minutes to 5 hours. The camera can be charged by connecting it to a computer or a power outlet using the supplied USB cable. When charging the battery, ensure that the connectors are fully inserted and in the correct orientation. It is also important to unplug the charger when it is not in use and to remove the battery when charging is complete. Additionally, it is recommended to charge the battery one or two days before use as it gradually loses its charge when not in use.

Charging the Fujifilm X10 camera battery for the first time

To charge your Fujifilm X10 camera battery for the first time, you will need the Fujifilm NP-50 rechargeable lithium-ion battery pack, which is sold separately. This battery is specifically designed to be used with the X10 camera and some other selected Fujifilm cameras.

The NP-50 operates at a voltage of 3.7V and has a capacity of 1000mAh. It can be charged from a standard electrical outlet using the Fujifilm BC-50 charger, which can be purchased separately. The battery pack measures 40mm in width, 5mm in height, and 40mm in depth, and weighs 23g. It is available in a grey outer finish from good camera retailers, such as Amazon, for around $40.

Before charging, ensure the battery terminals are free from dirt and other debris by cleaning them with a dry cloth. This will help to prevent the battery from failing to charge.

To charge the battery, attach the plug adapter to the AC power adapter, ensuring it is fully inserted and clicks into place. Then, connect the camera to the AC power adapter using the supplied USB cable. Plug the AC power adapter into an indoor power outlet.

The battery will take approximately 4 hours and 30 minutes to fully charge. The charging indicator will light up to show that the battery is charging. When the battery is fully charged, the lamp will turn off completely.

Once the battery is fully charged, remove it from the charger and insert it into the base of the camera, ensuring the contacts on the battery align with the contacts in the battery chamber.

It is worth noting that the battery gradually loses its charge when not in use, so it is recommended to charge it one or two days before you intend to use it. Additionally, charging times may increase at very low or very high temperatures.

Using a power bank to charge the X10 camera

The X10 camera is a WiFi-enabled security camera that supports 1080p HD video and two-way audio. It can be easily set up by pointing the camera lens at the QR code displayed in the app, which pairs the camera with your account.

To charge the X10 camera, you will need to use the 6.5 ft power adapter that comes with the camera. Here is a step-by-step guide on how to charge the X10 camera using a power bank:

Step 1: Get a power bank that meets the power requirements of the X10 camera. The camera comes with a 6.5 ft power adapter, so you will need a power bank that has a similar power output.

Step 2: Connect the power bank to the X10 camera using the power adapter. Ensure that the connections are secure and firmly plugged in.

Step 3: Turn on the power bank. Depending on the model of the power bank, you may need to press an "ON" button to start the charging process.

Step 4: Allow the camera to charge fully. The charging time will depend on the power output of the power bank and the specifications of the camera. On average, camera batteries can take around 2-4 hours to charge fully.

Step 5: Once the camera is charged, disconnect the power bank and power adapter from the camera. You can now use the X10 camera as usual.

Note: It is important to use a power bank that meets the power requirements of the X10 camera. Using a power bank with insufficient power output may result in longer charging times or incomplete charging. Additionally, always follow the safety precautions provided by the manufacturer when charging any electronic device.

Charging the X10 camera battery via USB

To charge the X10 camera battery via USB, follow these steps:

Firstly, it is important to note that the X10 camera uses an NP-50 rechargeable battery. Ensure that the battery is inserted into the camera with the correct orientation, as indicated by the DFC labels.

Then, connect the supplied USB cable to the camera and a computer. Make sure that the connectors are fully inserted. Do not use a USB hub or keyboard; connect the camera directly to the computer. If the computer goes into sleep mode while charging, disable sleep mode and disconnect and reconnect the USB cable.

Alternatively, you can use a USB wall charger, such as an Apple 12W USB Power Adaptor, in place of the computer. The X10 camera battery can be charged via any USB-C charger, and the wattage of the adapter will not affect charging time. However, it is important to note that the USB-C wattage standard is limited to 5V 3A, or 15W.

The X10 camera can also be charged via a power bank. Ensure that the power bank's output is compatible with the camera's charging requirements, such as DC 5V, 1A output.

The charging indicator on the camera will light up to show that the battery is charging. The battery takes approximately 4 hours and 30 minutes to fully charge. Once charging is complete, remove the battery from the camera.

It is important to note that charging times may increase at very low or high temperatures. Additionally, the battery will gradually lose its charge when not in use, so it is recommended to charge the battery one or two days before use.

Using a computer to charge the X10 camera battery

To charge your X10 camera battery using a computer, follow these steps:

Firstly, ensure that your computer is turned on. Adjust any settings according to whether you will be using the camera or not.

Next, connect the camera to the computer using a USB cable. The cable must be no longer than 1.5m (4.9ft) and suitable for data transfer. Make sure the connectors are fully inserted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard.

Now, turn the camera off.

At this point, you can copy pictures to your computer using applications supplied with your operating system, such as Image Capture. You can also use tethered shooting software such as Capture One Pro Fujifilm, Adobe Photoshop Lightroom + Tether Plugin, or FUJIFILM X Acquire.

When you have finished transferring images, turn the camera off before disconnecting the USB cable. Make sure the indicator lamp is off or lit green before disconnecting. Do not disconnect while the transfer is in progress, as this could result in data loss or damage to the memory card.

Note that if your computer goes into sleep mode while charging, charging will stop. To continue charging, disable sleep mode on the computer, and disconnect and reconnect the USB cable.

Using a wall charger to charge the X10 camera

To charge your X10 camera using a wall charger, follow these steps:

First, ensure that your camera battery is inserted correctly, with the DFC labels indicating the proper orientation. The X10 uses an NP-50 rechargeable battery.

Next, attach the plug adapter to the AC power adapter, making sure it is fully inserted and clicks into place. Then, connect your camera to the AC power adapter using the supplied USB cable. Plug the AC power adapter into an indoor power outlet. Ensure that the connectors are in the correct orientation and fully inserted.

The charging indicator will light up, and you can monitor the charging status through the battery status icons when the camera is turned on, or via the indicator lamp when the camera is off.

The battery will take approximately 4 hours and 30 minutes to fully charge. It is important to note that charging times may increase at very low or high temperatures.

When charging is complete, unplug the charger from the power outlet and remove the battery from the camera.

Some additional precautions to keep in mind:

• Do not use the plug adapter with other devices, as it is exclusively for use with the supplied AC power adapter.
• Keep the battery terminals clean and free from dirt by wiping them with a clean, dry cloth.
• Do not affix stickers or other objects to the battery, as this may make it difficult to remove the battery from the camera.
• Avoid shorting the battery terminals, as this may cause the battery to overheat.
• Only use battery chargers designated for use with the X10 battery to prevent product malfunction.
• Do not remove labels from the battery or attempt to split or peel the outer casing.

By following these steps and precautions, you can safely and effectively charge your X10 camera using a wall charger.

Frequently asked questions