Charging A Vtech Camera: A Step-By-Step Guide

how to charge a vtech camera

If you're wondering how to charge your VTech Kidizoom camera, you're not alone! Many people have tried charging it via USB, only to find that it doesn't work. That's because the Kidizoom camera uses four standard AA batteries, which need to be replaced when they run out of charge. You can use disposable or rechargeable batteries, but if you choose rechargeable, you'll need to charge them in a separate battery charger. So, if your Kidizoom camera isn't turning on, try replacing the batteries, and you should be good to go!

Characteristics Values
Number of batteries 4
Type of batteries AA
Charging method External battery charger
Charging time 24 hours
Charging port USB
Master power switch position Off

shundigital

Charging with a USB cable

To charge your VTech Kidizoom camera with a USB cable, you will first need to locate the USB port on the camera. Once you have found the port, connect the USB cable to the camera and the other end to a power source, such as a computer or a USB wall charger.

If you are using a USB wall charger, simply plug the charger into a power outlet and connect the USB cable to the charger. If you are using a computer, ensure that the computer is turned on and awake (not in sleep mode) for the camera to charge.

It is important to note that not all VTech Kidizoom cameras have a rechargeable battery. Some models use standard AA batteries, which need to be replaced when they are dead. If your camera uses AA batteries, charging via USB will not work.

To determine if your camera has a rechargeable battery, look for a small switch on the right side of the camera when it is upside down. If the switch is present, your camera is rechargeable and can be charged via USB. If there is no switch, your camera uses AA batteries, which need to be replaced.

Additionally, when charging via USB, ensure that the master power switch on the bottom of the device is in the 'off' position. If the camera still does not charge, try using a different USB cable or check if the cable and power source are functioning correctly.

shundigital

Charging with an iPhone charger

If you have a VTech Kidizoom camera and are looking to charge it using an iPhone charger, there are a few things you should know. Firstly, the Kidizoom camera does not have a built-in rechargeable battery and instead uses four standard AA batteries, which need to be replaced when they run out of charge. If you wish to use rechargeable batteries, they must be charged separately using an external battery charger.

Now, if you're trying to charge your VTech Kidizoom camera with an iPhone charger, it's important to understand that the iPhone charger by itself will not work. iPhone chargers use a Lightning cable, while the VTech Kidizoom camera requires a Micro-USB cable for file transferring and charging. Therefore, you will need to use the Micro-USB cable that came with your camera and plug it into the iPhone charger adapter.

Additionally, some models of the Kidizoom camera have a master power switch that needs to be placed in the ''off' position for the device to charge. If your camera has this switch, make sure it is turned off before attempting to charge.

It's worth noting that some newer versions of the Kidizoom camera are rechargeable. If you have one of these models, you can plug the Micro-USB cable into the iPhone charger adapter and connect it to your camera. However, make sure to turn the camera upside down and locate the small on/off switch on the right side. Slide the switch to the 'on' position, and your camera should start charging.

In summary, while you can use the adapter from an iPhone charger to charge your VTech Kidizoom camera, you will need the correct Micro-USB cable, and you may need to replace or recharge the AA batteries if they are not holding a charge.

shundigital

Charging with a micro-USB cable

To charge a VTech Kidizoom camera using a micro-USB cable, follow these steps:

First, check if your VTech Kidizoom camera has a micro-USB port. The camera should have come with a micro-USB cable. If not, you can purchase one separately.

Once you have the micro-USB cable, connect it to the camera and a power source such as a computer or a USB wall charger.

If your camera has a master power switch, ensure it is in the off position for the device to charge. If there is no master power switch, your camera may have a small on/off switch near the micro-USB port.

If you are using a USB wall charger, try using a standard charger instead of a fast charger. Some VTech Kidizoom cameras may not charge with a fast charger.

If your camera still does not charge, try using the cable that came with the camera, or a different micro-USB cable.

It is important to note that some VTech Kidizoom cameras do not have rechargeable batteries and need to have their batteries replaced. If your camera uses disposable batteries, you will need to replace them when they run out of charge.

shundigital

Charging rechargeable batteries

To charge rechargeable batteries, you will need to get a battery charger that is compatible with the batteries you are trying to charge. You can find these at any electronics or hardware store.

When charging your batteries, make sure to only charge rechargeable batteries and not single-use batteries, as trying to recharge single-use batteries can cause corrosion and damage to your charger. You should also ensure that you are using the right type of charger for your batteries, as different types of chargers are designed for different types of rechargeable batteries and are usually not interchangeable.

When charging your batteries, make sure to insert them into the charger with the correct polarity. This means putting the positive (+) ends into contact with the charger's positive terminals and likewise with the negative (-) ends. Most A/C chargers should have a diagram showing you how to orient the batteries properly.

Allow your batteries to fully charge, and do not interrupt the process by unplugging the charger or removing the batteries early. Once the batteries are fully charged, remove them from the charger to avoid overcharging them, which can reduce their lifespan.

If you are charging a car battery, make sure to remove it from the vehicle and clean the battery terminals before charging it. You will also need to determine the voltage of your battery and use a charger with the appropriate output voltage.

shundigital

Charging non-rechargeable batteries

The VTech Kidizoom camera uses four standard AA batteries, which can be disposable or rechargeable. If you use rechargeable batteries, they must be charged in a separate battery charger outside the camera.

Now, while it is possible to recharge non-rechargeable batteries, it is not recommended. This is because non-rechargeable alkaline batteries are not designed to be recharged, and doing so can be dangerous.

Firstly, the amount of time and expense that goes into recharging non-rechargeable batteries is not justified by the number of charge cycles. You can only recharge a disposable alkaline battery 7 to 10 times, whereas smart lithium batteries can be charged a thousand times or more.

Secondly, recharging non-rechargeable batteries can be unsafe. Alkaline batteries leak even under normal circumstances, and recharging them can cause them to get very hot and explode. To recharge them safely, you have to constantly cycle a charger on and off to prevent overheating, which can be a tedious and time-consuming process.

Therefore, while it is technically possible to recharge non-rechargeable batteries, it is much safer and more efficient to use rechargeable batteries or simply replace non-rechargeable batteries when they run out of power.

Frequently asked questions

The Kidizoom camera uses four standard AA batteries, which can be disposable or rechargeable. If rechargeable, these must be charged outside of the camera using a separate charger.

The USB port on the camera is likely only for transferring photos and not for charging. Try replacing the batteries.

Plug the USB charger into the camera and turn the camera upside down. You will find a small on/off switch on the right side. Switch it across and it will start charging.

"Sanyo eneloop" batteries are recommended as the best rechargeable batteries for this device.

Ensure that the master power switch on the bottom of the device is placed in the 'off' position. If the issue persists, the USB cable or battery may be faulty.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment