Finding The Mode Button On The Hero 5 Camera

The GoPro Hero5 Black is an HD waterproof action camera with voice control, a touch screen display, and built-in WiFi. It was released in September 2016 (or October 2016, according to another source). The camera features a MODE button that can be used to reset the camera if it is frozen. However, some users have reported issues with the MODE button not working properly, especially after using the camera in the sea or the pool. In such cases, reflashing the firmware or using the GoPro Quik app to control the camera remotely have been suggested as possible solutions.

The mode button on the GoPro Hero 5 Black can be used to turn the camera on and off

The GoPro Hero 5 Black is a powerful HD waterproof action camera, capable of capturing 4K resolution video with voice control, a touch screen display, and built-in WiFi. While it is a robust and versatile camera, some users have reported issues with the mode button.

The mode button on the GoPro Hero 5 Black is a crucial component, allowing users to power the camera on and off and switch between different modes. However, some users have encountered problems with the mode button not functioning properly. In some cases, the button may become unresponsive or behave erratically, changing modes or turning the camera on and off unintentionally. This can be a frustrating issue, especially when it occurs during filming or in challenging environments.

There are several potential causes and solutions for mode button issues. One common problem is water damage, as even a small amount of water ingress can affect the button's functionality. Reflashing the firmware using specific software tools has been reported to temporarily resolve the issue. However, in some cases, the mode button may become completely unresponsive, requiring further troubleshooting.

To address mode button issues, users can try a few different approaches. Firstly, it is essential to ensure that the camera software is up to date, as updates may include fixes for button responsiveness. Additionally, users can try resetting the camera by holding the mode button for approximately 10 seconds. If this does not work, removing and reinserting the battery may help unfreeze the camera. In some cases, the issue may be related to the SD card; replacing it with a different card may improve the camera's overall performance, including the mode button.

While the mode button is essential for powering the camera on and off and changing modes, users can also explore alternative methods to operate the GoPro Hero 5 Black. For example, when the camera is mounted in a gimbal, the mode button may be covered, so utilising the top record button to turn the camera on and off is an option. Additionally, the GoPro Capture App can be used to switch between modes remotely, and the GoPro Remo accessory enables voice activation for powering the camera on and off. These workarounds can be valuable when the mode button is unresponsive or when the camera is mounted in a way that restricts physical access to the button.

The button can be held for 10 seconds to reset the camera

The GoPro Hero 5 camera has a mode button that can be used to switch between different modes while using the camera. This button is located on the camera body and is usually easily accessible. However, in some cases, the mode button may be covered when the camera is installed in certain mounts or gimbals due to the GoPro's new design.

While the mode button serves various functions, one specific function is that it can be used to reset the camera. If your GoPro Hero 5 is freezing up or acting erratically, holding down the mode button for 10 seconds can reset the camera and potentially resolve these issues. This process of holding the button for 10 seconds is a deliberate action to ensure that the camera has enough time to initiate the reset process and is not accidentally triggered.

To perform a reset, start by ensuring your camera is turned on. Then, locate the mode button, which is usually on the side or top of the camera, depending on your model. Press and hold the mode button for at least 10 seconds. The camera may vibrate or display a specific message on the screen to indicate that it is resetting. After the reset, your camera should function normally again.

It is important to note that resetting your GoPro Hero 5 camera will not delete any of your photos or videos stored on the SD card. The reset process is intended to reset the camera's settings and functionality without affecting your stored data. However, if you are experiencing issues with your SD card, such as it being faulty or incorrect, you may need to remove and reinsert it or replace it with a compatible one.

In some cases, issues with the mode button itself have been reported. Some users have experienced problems with the mode button behaving erratically or becoming completely unresponsive after using the camera in water. If you encounter issues with the mode button, you may need to reflash the firmware or consider other alternatives, such as using the GoPro Quik app or the GoPro Capture APP to control the camera and switch between modes.

The button may not work if water has entered the camera

The GoPro Hero 5 is an HD waterproof action camera. However, issues with the mode button not working have been reported by some users. In some cases, this may be due to water damage.

Water damage can cause the camera's internal components to malfunction, including the buttons. While the GoPro Hero 5 is designed to be waterproof, it is possible for water to enter the camera if the housing is damaged or not properly sealed.

If water has entered the camera, it is important to act quickly to minimize the potential damage. First, remove the battery and SD card to prevent short circuits and further damage. Then, rinse the camera with fresh water to remove any salt or chemicals from the sea. After that, dry the camera thoroughly, especially the button contacts and internal components.

You can try placing the camera in a bag of rice or silica gel to absorb any remaining moisture. Leave the camera to dry for at least 24 hours before attempting to turn it on or use any of the buttons. It is important to give the camera enough time to dry completely to avoid further damage.

The button may be covered when installed in certain mounts

When using a GoPro Hero 5 camera, one of the most crucial buttons is the Mode button, which allows you to switch between different shooting modes and settings. However, some users may encounter an issue where the Mode button seems to be missing or covered, especially when the camera is installed in certain mounts. This can be frustrating, especially if you need to quickly change settings or modes while your camera is mounted. This issue is often encountered by users who have mounted their GoPro Hero 5 onto a helmet, bike handlebar, or surfboard using one of the many available mounting options. The cause is usually due to the design of the mount, which may have a protective cover or enclosure that secures the camera in place but also ends up partially covering the buttons, particularly the Mode button.

The button may be covered when the camera is installed in certain mounts because some mount designs aim to provide a secure and tight fit, ensuring that the camera doesn't accidentally detach during activities. While this is important for safety and stability, it can result in limited access to the camera's buttons. The manufacturer has acknowledged this trade-off and emphasizes the importance of choosing the right mount for your specific needs. For instance, if you require frequent access to the Mode button, opting for a mount with a more open design might be preferable, even if it means slightly less security.

In some cases, the cover might be removable or adjustable, allowing you to customize the fit and access to the buttons. Check if your mount has this feature and adjust it accordingly to ensure the Mode button is accessible. If the cover is not adjustable, you may need to consider a different mount that provides better access to the buttons. Additionally, some third-party manufacturers offer custom frame cases or housing systems for the GoPro Hero 5 that might provide better button accessibility while still being compatible with various mounts.

It's worth noting that the GoPro Hero 5 Session model, a more compact version of the Hero 5, has a slightly different button layout, and users might encounter similar issues with button accessibility depending on the mount used. Always ensure that you're using the correct mounts and accessories designed specifically for your GoPro model to avoid any compatibility issues that might hinder button access. Overall, while the tight and secure fit of certain mounts might obstruct the Mode button, it's important to balance this with your need to quickly access the button during your activities.

The GoPro Quik app can be used to control the camera if the mode button is not working

The mode button on the GoPro Hero 5 camera is located on the top of the device, along with the top mic. When the camera is installed in a mount, the mode button may be covered, which can make it difficult to access. If the mode button on your GoPro Hero 5 camera is not working, there are alternative ways to control the camera. One option is to use the GoPro Quik app, which allows you to remotely control your camera from your phone or laptop.

The GoPro Quik app is available for iOS, Mac, and Android devices and offers a range of features to control and manage your GoPro camera. With the app, you can perform basic functions such as changing modes, starting and stopping recordings, and turning the camera on and off. The app also provides a live preview, allowing you to frame your shots and aim the camera properly. Additionally, you can download clips to your phone, adjust camera settings, and access your GoPro footage for editing.

To use the GoPro Quik app with your Hero 5 camera, you will need to pair the two devices. Make sure your camera is connected to your smartphone or laptop via a wired USB connection, and follow the instructions in the app to complete the pairing process. Once paired, you can use the app to control your camera remotely, even if the mode button is not functioning.

In addition to the GoPro Quik app, there are other alternatives to control your GoPro Hero 5 camera if the mode button is not working. One option is to use the GoPro Capture app, which can be used to switch between modes. Another option is to use the GoPro Remo, a voice-activated accessory that allows you to turn the camera on and off using voice commands.

By utilising these alternative control methods, you can continue to use your GoPro Hero 5 camera even if the mode button is not responsive or accessible. The apps and accessories provide a convenient way to access the camera's functions and ensure that you can capture the content you need.

Frequently asked questions