D-Link Camera: Understanding Ceiling Mode Functionality

D-Link cameras can be mounted on walls or ceilings using a mounting base and screws. The camera can be separated from its mounting base, which can then be affixed to the desired surface. The camera can then be reattached to the mounting base. The D-Link camera can also be affixed to a round stand that can be placed on a desktop.

Camera configuration before mounting

Before mounting your D-Link camera, it is suggested that you configure it first. Here are the steps you can follow for the camera configuration:

Step 1: Separate the Camera from the Mounting Base

Hold the camera with the D-Link logo facing you, then slide the mounting base towards you to expose the holes in the mounting base.

Step 2: Mark the Position of the Camera

Use the mounting plate or the mounting base alignment sticker as a guide to mark where you want to position the camera. Depending on the material of the wall or ceiling, use the appropriate tools to drill two holes. If the wall is made of concrete, drill the holes first, then insert plastic anchors to support the screws.

Step 3: Attach the Mounting Base to the Wall

Place the mounting plate or base over the holes in the wall, ensuring that the holes in the mounting base align with the holes in the wall. Use the supplied screws to secure the mounting base to the wall. Do not over-tighten the screws as this may crack the mount.

Step 4: Reattach the Camera to the Mounting Base

With the D-Link logo facing you, slide the camera towards you until it locks into position on the mounting plate or base.

Step 5: Adjust the Camera Angle

Rotate the camera body to adjust the angle as desired. Once you are satisfied with the angle, tighten the collar on the camera stem to lock it in place.

After completing these steps, your D-Link camera should be configured and ready for mounting.

Marking the holes for the mounting base

To mark the holes for the mounting base of your D-Link camera, follow these steps:

Firstly, separate the camera from the mounting base to expose the holes. Hold the base where you want to position the camera, ensuring it is level and at least 20cm from the ceiling. Use a pencil to mark the holes. If your camera has a mounting base alignment sticker, place this where you want to position the camera and mark the holes through the sticker.

Now you have your marks on the wall, you can drill the holes. Depending on the material of the wall or ceiling, use the appropriate tools to drill. If you are drilling into concrete, drill the holes first and then insert plastic anchors to support the screws. For a plaster or dry wall, insert the anchors after drilling. Use a 6mm drill bit to drill the holes to a depth of at least 25-30mm.

Now you have the holes drilled, you can place the mounting base over the holes in the wall, aligning the holes in the base with the holes in the wall. Use the supplied screws to attach the base to the wall, being careful not to over-tighten the screws as this may crack the mount.

Drilling holes and inserting anchors

Planning and Preparation:

Before you start drilling, it's important to plan the location of your camera. Decide on the desired position and hold the included mounting base or bracket against the wall or ceiling. Use a pencil to mark the holes where you will drill.

Drilling Holes:

The next step is to drill the holes. Depending on the surface material, use the appropriate tools. If you're drilling into concrete, it's recommended to use a 6mm drill bit to create holes that are at least 25-30mm deep. This will provide a strong foundation for your camera.

Inserting Anchors:

After drilling the holes, it's time to insert the anchors. For concrete walls, use plastic anchors to support the screws. Gently tap the anchors into the holes using a mallet or a hammer. Make sure they are securely fitted and can support the weight of the camera.

Attaching the Mounting Base:

Once the anchors are in place, position the mounting base over the holes. Align the holes in the base with the holes in the wall or ceiling. Use the supplied screws to attach the mounting base securely. Be careful not to over-tighten the screws, as this may crack the mount.

Connecting the Camera:

Now, you can attach your D-Link camera to the mounting base. Reattach the camera head by sliding it towards you until it locks into position, with the D-Link logo facing you. You may need to separate the camera from the base to expose the holes during this process.

Adjusting the Camera Angle:

Finally, adjust the angle of the camera as needed. Loosen the collar on the camera stem and rotate the camera body until you achieve the desired viewing angle. Once you're happy with the position, tighten the collar to lock the camera in place.

Remember, it is suggested that you configure your D-Link camera before mounting it. Additionally, always follow the specific instructions provided by the manufacturer for your particular camera model to ensure a safe and secure installation.

Attaching the mounting base

To attach the mounting base of your D-Link camera, follow these steps:

Firstly, separate the camera from the mounting base to expose the holes in the base. Hold the camera with the D-Link logo facing you, then turn the camera head counterclockwise to unscrew it from the base. Now you can mark the position of the mounting base on the wall or ceiling. Use a pencil to mark the holes, holding the base in the desired position.

The next step is to drill the holes. Depending on the surface material, use the appropriate tools. For a plaster, dry wall, or concrete wall, use a 6mm drill bit to drill holes at least 25-30mm deep. If the wall is concrete, drill the holes first, then insert the plastic anchors to support the screws.

Now, place the mounting base over the holes in the wall, ensuring the holes in the base align with those in the wall. Use the supplied screws to attach the base to the wall, being careful not to over-tighten the screws as this may crack the mount.

Once the base is secure, you can reattach the camera head. With the D-Link logo facing you, slide the camera towards you until it locks into position.

Finally, adjust the angle of the camera to your desired position by rotating the camera body. You can then tighten the collar on the camera stem to lock it in place.

Adjusting the camera angle

Once you have successfully mounted your D-Link camera to the wall or ceiling, you can proceed to adjust its angle.

To adjust the angle of your D-Link camera, follow these steps:

• Loosen the collar on the camera stem.
• Adjust the camera angle as desired. You can do this by rotating the camera body or the mounting lens up and down. Ensure that the camera is pointing towards the desired area or object you want to capture.
• Tighten the collar on the camera stem to lock the angle in place.

It is suggested that you configure the camera before mounting it on the wall or ceiling. Here are the steps to mount your D-Link camera:

Mounting the D-Link Camera

• Separate the camera from the mounting base to expose the holes in the base. To do this, firmly hold the camera with the D-Link logo facing you and then slide the mounting base towards you.
• Place the mounting base alignment sticker where you want to position the camera. Mark the holes with a pencil.
• Depending on the wall or ceiling material, use the appropriate tools to drill the holes. If the wall is made of concrete, drill the holes first and then insert plastic anchors to support the screws.
• Place the mounting base over the holes in the wall, ensuring that the holes in the base align with the holes in the wall.
• Attach the mounting base to the wall using the supplied screws. Be careful not to over-tighten the screws as this may crack the mount.
• Reattach the camera to the mounting plate by sliding the camera towards you until it locks into position, with the D-Link logo facing you.
• Adjust the camera angle as mentioned above.

Frequently asked questions