Removing Dericam Camera's Dome: A Step-By-Step Guide

Maintaining and cleaning your Dericam camera is crucial to ensure optimal performance and image quality. The dome cover shields the camera from the elements, but it may need to be removed for maintenance, cleaning, or adjustments. In this article, we will provide a step-by-step guide on how to safely remove the outside dome on your Dericam camera, ensuring a hassle-free process and preserving the longevity of your camera.

Loosen the dome cover screws

To loosen the dome cover screws on your Dericam camera, you will need a screwdriver. The specific type of screwdriver will depend on the screws used by your camera model. In most cases, a small or medium-sized Phillips head screwdriver should be suitable. However, some cameras may use different types of screws, so it is important to consult your camera's user manual to determine the correct type of screwdriver required.

Once you have the appropriate screwdriver, follow these steps to loosen the dome cover screws:

• Power off the camera and disconnect it from any power source to ensure safety and prevent any accidental damage during the process.
• Locate the screws that hold the dome cover in place. They are typically found around the base of the dome or at the edges.
• Insert the screwdriver into the screw head and apply gentle pressure to loosen the screws. Turn the screwdriver counterclockwise to slowly unscrew them. Be careful not to apply too much force, as this may strip the screws or damage the screw heads.
• As you loosen each screw, keep track of how many turns you make to ensure that you don't overtighten them when reattaching the dome cover later. Alternatively, you can place the screws in a safe location as you remove them to avoid misplacing them.
• Continue loosening the screws until they are no longer threaded into the screw holes. There may be multiple screws around the dome cover, so make sure to loosen them all evenly.
• Once all the screws have been sufficiently loosened, you can proceed to carefully lift the dome cover away from the camera body.

Remember to handle the camera with care and avoid touching any internal components. The camera lens and other sensitive parts can be easily damaged or misaligned if mishandled. If necessary, use a soft cloth or microfiber cloth to gently clean the dome cover or camera lens before proceeding with any further maintenance or adjustments.

Use a screwdriver to remove the screws

To remove the outside dome on a Dericam camera, you will need to use a screwdriver. Here is a detailed, step-by-step guide to help you with the process:

Locate the screws: Begin by examining the dome housing of your Dericam camera to identify the screws that secure the dome in place. These screws are typically located around the base of the dome or along its edges.

Choose the right screwdriver: Ensure that you have the correct type and size of screwdriver for the job. In most cases, a small or medium-sized Phillips head screwdriver is suitable for removing the screws on an outdoor camera dome.

Insert the screwdriver: Carefully insert the screwdriver into the screw head and apply gentle pressure to get a secure grip. This will help you avoid slipping and prevent any damage to the screw head.

Turn counterclockwise: Once the screwdriver is securely in place, turn it counterclockwise to loosen and remove the screws. Be careful not to apply excessive force, as this could damage the screws or the camera housing.

Keep screws safe: As you remove the screws, place them in a secure location to avoid losing them. It is easy to misplace small screws, so consider using a container or placing them away from the work area.

By following these steps, you will successfully remove the screws that hold the outside dome of your Dericam camera in place. Remember to handle the camera with care and avoid touching any internal components. The next step in the process will be to gently lift the dome away from the camera, exposing the lens and internal mechanisms.

It is important to consult the user manual for your Dericam camera before beginning this process, as it will provide specific instructions and precautions for your particular model. Additionally, ensure that the camera is powered off and disconnected from any power source to prevent electrical accidents.

Gently lift the dome

Once you have removed the screws, it's time to gently lift the dome of your Dericam camera. This step is crucial, as it will expose the internal components and the camera lens. It's important to be cautious and not apply too much force during this process. The dome should come off easily, but you need to be careful not to touch or interfere with any of the delicate parts inside.

When removing the dome, be mindful of your handling. The internal components, including the camera lens, are sensitive and can be easily damaged or misaligned if mishandled. Even a slight touch can affect the performance of your camera, so it's best to avoid any contact with the internal parts.

If you notice any dirt, dust, or smudges on the dome or camera lens, it's advisable to use a soft cloth or microfiber cloth to gently clean them. It is important to avoid using harsh chemicals or abrasive materials, as these can scratch or damage the surfaces. A gentle cleaning motion will help maintain the integrity of the dome and lens, ensuring they remain in optimal condition.

In addition to being cautious about touching the internal components, pay attention to any cables or connectors that may be attached to the camera. Before completely detaching the dome, ensure that all necessary connections are carefully detached to avoid any strain or damage to the wiring. A gentle lift, combined with attention to the cables and connectors, will help ensure a smooth dome removal process.

By following these instructions, you will be able to safely lift the dome of your Dericam camera. Remember to take your time and handle the camera with care to avoid any accidental damage.

Handle internal components with care

When removing the outside dome on a Dericam camera, it is important to handle the internal components with utmost care to avoid damage and ensure optimal performance. Here are some detailed instructions to guide you through the process:

Prepare Your Workspace:

Before you begin, ensure you have a clean and organised workspace. Gather all the necessary tools, such as a small or medium-sized Phillips head screwdriver, a soft microfiber cloth, and latex gloves. These tools will help you handle the internal components without causing any damage. Place the camera on a soft surface to prevent scratches or damage during the removal process.

Power Off and Disconnect:

Make sure the camera is powered off and disconnected from any power source before you start. This is crucial to prevent electrical accidents or interference while working on the camera. It ensures your safety and protects the camera's sensitive electronics.

Locate and Remove Screws:

Inspect the dome housing to locate the screws holding the dome in place, typically found around the base or edges. Use the appropriate screwdriver to carefully loosen and remove the screws. Keep the screws in a safe place to avoid misplacing them.

Gently Lift the Dome:

With the screws removed, gently lift the dome housing upward. Be cautious not to apply excessive force. The dome should come off easily, exposing the internal components, including the camera lens. Take special care not to touch or interfere with these delicate parts.

The internal components of your Dericam camera are sensitive and easily damaged. As you remove the dome, avoid touching or adjusting any of these components. The camera lens, in particular, is susceptible to scratches and misalignment. If you need to clean the lens or make adjustments, use a soft, lint-free microfiber cloth. Avoid using harsh chemicals or abrasive materials, as they can damage the lens surface.

Clean and Maintain:

If you notice any dust, dirt, or smudges on the internal components, gently clean them using a soft cloth and a specialised cleaning solution. Ensure the cloth is free from lint and debris to prevent scratches. You can also use compressed air to blow away loose dust particles without direct contact. Remember to handle the internal components gently during the cleaning process.

Reattach the Dome Securely:

Once you have completed any necessary cleaning or adjustments, carefully place the dome back onto the camera, aligning it with the screw holes. Tighten the screws securely but not excessively, as over-tightening can lead to damage or misalignment. Test the camera after reassembly to ensure it is functioning correctly.

Follow User Manual Guidelines:

Always refer to the user manual provided by Dericam for specific instructions on removing and handling the dome. The manual will provide valuable information on how to properly care for your camera and avoid potential damage. Follow the manufacturer's guidelines to ensure optimal performance and longevity.

Avoid Unnecessary Tampering:

Only remove the dome when necessary for maintenance or adjustments. Unnecessary tampering can increase the risk of damage to the camera and its internal components. If you encounter any difficulties or are unsure about any step, seek professional assistance or contact Dericam customer support for guidance.

By following these instructions and handling the internal components with care, you can safely remove the outside dome on your Dericam camera and maintain its optimal performance. Remember to prioritise safety, prepare properly, and take your time during the removal and reassembly process.

Clean the dome if necessary

If you notice any dirt, dust, or smudges on the dome or camera lens, grab a soft cloth or a microfiber cloth and gently clean the affected areas. Avoid using harsh chemicals or abrasive materials that could scratch or damage the surfaces.

To clean dust or loose dirt, use compressed air. Hold the can of compressed air upright and blow away loose dust and particles from the surface, starting from the centre and working outward systematically to avoid pushing particles into the edges.

To clean smudges or stuck-on dirt, use a mild dish soap. Warm water with a few drops of mild dish soap and a clean microfiber cloth will do the trick. Avoid using paper towels, as the paper may scratch the dome.

If there is a significant accumulation of dirt or grease on the camera dome, wash the dome in warm soapy water and dry it with a microfiber cloth.

For dome cameras, be sure to wipe both the lens and either side of the glassy part of the dome. Don't forget to wipe the rest of the casing, too. Once the surface is dry, replace the casing and put the unit back in its original place.

Frequently asked questions