Removing The Lg Stylo 4 Camera: A Step-By-Step Guide

how to remove the camera from a lg stylo 4

If you're experiencing issues with your LG G Stylo rear camera, you may be considering removing or replacing it. Before you begin, make sure that you power off the phone. Removing the camera involves first taking off the back cover by prying it up with a plastic opening tool. Then, you'll need to remove the battery and eleven 3.9mm visible screws. Next, you'll detach the motherboard cover and carefully lift up the ribbons where the cables are connecting. Finally, you can fully remove the motherboard and gently wedge the plastic opening tool under the ribbon where the rear camera cable is connected.

shundigital

Power off the phone

To remove the camera from your LG Stylo 4, it is important to first power off the phone. This is a crucial step to ensure your safety and prevent any accidental damage to the device. Here is a detailed guide on powering off your LG Stylo 4 before beginning the camera removal process:

Make sure your phone is easily accessible and within arm's reach. Press and hold the power button, which is usually located on the right or top edge of the device. Depending on your phone's settings, you may need to press and hold the power button along with the volume buttons. A power menu will appear on the screen, giving you the option to power off the device. Select the power-off option by tapping on it or using the volume buttons to navigate and the power button to select. If your phone is not responsive, you may need to long-press the power button for a forced shutdown.

Wait for a few seconds after selecting the power-off option. The screen will temporarily go blank, and the device will shut down. You will know the phone is powered off when it shows no signs of activity, and the screen remains black. If the phone is responsive, the screen should display the time and indicate that it is powered off. If it does not display anything, check if there is any LED indicator light that signifies the phone is off. Once the phone is completely powered off, you may proceed with the next steps of removing the back cover and detaching the battery.

It is always recommended to power off your device before attempting any repairs or hardware modifications. This ensures that there is no risk of short circuits or accidental damage to the internal components. Additionally, it prevents any potential data loss or corruption during the process. By taking the time to properly power off your LG Stylo 4, you are ensuring a safer and more effective repair process.

Remember, before powering off, it is advisable to have a reasonable battery charge to prevent accidental shutdown during the camera removal process. Additionally, ensure you have all the necessary tools, such as a plastic opening tool and a Phillips #00 screwdriver, to avoid any interruptions during the procedure.

shundigital

Remove the back cover

To remove the back cover of an LG Stylo 4, start by powering off the phone completely. Next, use a plastic opening tool to gently pry up the bottom left side of the device. There is a small slit on the left side that your tool should fit into perfectly. Insert the tool into the indent at the bottom of the battery and lift it up and out with your fingers.

Now you can begin to remove the eleven 3.9mm visible screws with a Phillips #00 screwdriver. Once all the screws are removed, place the plastic opening tool into the groove at the bottom left corner of the motherboard cover and lift it up. Before removing the cover, make sure to take out the SIM card. If you don't, you will not be able to put the cover back on as the SIM card will get stuck.

If you've never removed the motherboard cover before, this part may be a little tricky. If you have difficulty, try prying the plastic opening tool into each groove along the edge of the motherboard cover until it releases. Once a clip is released, you can use your fingers to finish detaching the cover.

shundigital

Take out the battery

To take out the battery of an LG Stylo 4, you will first need to power off the phone. Once the phone is off, you can begin the process of removing the back cover. Place a plastic opening tool on the bottom left side of the device and gently pry it up. There is a small slit on the left side of the device that fits the plastic opening tool perfectly.

Next, insert the plastic opening tool into the indent at the bottom of the battery and lift it up. At this point, you should be able to fully remove the battery with your fingers. It is important to note that you should be cautious when handling the battery and not puncture it.

If you are planning to replace the battery, it is recommended to purchase a battery replacement kit, which includes the necessary tools and adhesive. These kits are available online and can be found by searching for "LG Stylo 4 battery replacement kit."

Additionally, there are many instructional videos on YouTube that can guide you through the process of removing and replacing the battery in your LG Stylo 4. It is always a good idea to familiarize yourself with the process before attempting any repairs or modifications to your device.

shundigital

Unscrew the back

To remove the camera from an LG Stylo 4, you will first need to unscrew the back of the device. Power off the phone before you begin. Place the plastic opening tool on the bottom left side of the device and gently pry up the back cover. There is a small slit on the left side that fits the plastic opening tool perfectly. Insert the tool into the indent at the bottom of the battery and lift it up. Remove the battery with your fingers.

Next, use a Phillips #00 screwdriver to remove the eleven 3.9mm visible screws found on the back of the device. These screws are marked with indicators. Once you have finished removing the screws, place the plastic opening tool in the groove at the bottom left corner of the motherboard cover and lift it up. It is important to remove the SIM card before you remove the motherboard cover. If you do not, you will not be able to put the device back together.

If you have never removed the motherboard cover before, this part may be more difficult. If you experience any difficulty, pry the plastic opening tool into each groove along the edge of the motherboard cover until it releases. Once a clip is released, you can use your fingers to detach the motherboard cover.

shundigital

Detach the motherboard

To detach the motherboard of an LG Stylo 4, follow these steps:

Firstly, make sure that the phone is powered off before beginning any repair work. Remove the back cover by gently prying it up with a plastic opening tool, starting from the bottom left side of the device. Then, remove the battery with your fingers.

Next, use a Phillips #00 screwdriver to remove the eleven 3.9mm visible screws on the back. Once all the screws have been removed, place the plastic opening tool in the groove at the bottom left corner of the motherboard cover and gently lift it up. It is important to remove the SIM card before detaching the motherboard cover; otherwise, it will be stuck underneath when you reassemble the device.

If you have never removed the motherboard cover before, you may encounter some difficulty. In that case, carefully pry the plastic opening tool into each groove along the edge of the motherboard cover until it releases. Once the clips are released, you can use your fingers to detach the motherboard cover and set it aside.

Now, you can fully remove the motherboard. Pry upward with the plastic opening tool, being careful not to damage any of the small components nearby, as they are important for the device's functionality.

Frequently asked questions

First, make sure that your phone is powered off before you begin. Then, remove the back cover by placing a plastic opening tool on the bottom left side of the device and gently prying it up. Once you've removed the back cover, you can follow the steps outlined in the LG G Stylo Rear Camera Replacement guide to finish removing the camera.

You will need a plastic opening tool and a Phillips #00 screwdriver.

Yes, after removing the back cover, insert the plastic opening tool into the indent at the bottom of the battery and lift it up. Then, fully remove the battery with your fingers before proceeding to remove the eleven 3.9mm visible screws.

To detach the camera cables, carefully place the plastic opening tool under the ribbons where the cables are connecting and lift up. Be very careful with the ribbons, as they are small components that are crucial for the device's functionality.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment