Removing Simplisafe Outdoor Camera Battery: Step-By-Step Guide

The SimpliSafe Outdoor Camera is a wireless security camera with a long-lasting battery life of up to 3-6 months on a single charge. The battery can be easily removed and replaced by taking the camera down, opening it up, and either removing or swapping out the battery. The camera does not need to be shut off during this process, and it should power on and reconnect automatically. It is important to note that the camera should be mounted 6-8 feet above the ground, with the lens facing downward at a 30-degree angle, to optimize its battery life. Additionally, the motion sensitivity settings can be adjusted to extend the battery life.

No need to shut off the camera

You don't need to shut off your SimpliSafe outdoor camera before removing the battery. The process is simple and straightforward. Here's a step-by-step guide:

• Take down the camera from its mounting position.
• Open the camera.
• Remove the battery.
• You can then choose to charge the battery, swap it with a charged one, or insert a new one.
• Mount the camera back in its original position.

The camera should power on and reconnect automatically. There's no need to reset or reconfigure any settings. This convenience ensures you don't have to go through the hassle of setting up your camera from scratch each time you change the battery.

It's worth noting that the SimpliSafe outdoor camera has a long-lasting battery life. When fully charged, the battery can last up to 3 to 6 months, depending on usage and settings. To maximize battery life, consider adjusting the motion sensitivity settings, enabling People-Only Detection, and repositioning the camera to avoid capturing unnecessary movement in high-traffic areas.

Additionally, make sure to use the correct power adapter for charging. The SimpliSafe Outdoor Camera's battery requires a USB power adapter with specific output specifications. Using the wrong adapter may result in incomplete charging.

Open the camera to access the battery

To open your SimpliSafe outdoor camera to access the battery, you will first need to take the camera down from wherever it is mounted. Once you have the camera in hand, you can proceed to open it up.

The SimpliSafe outdoor camera has a button at the back that you need to press for 16 seconds to perform a hard reset. This will wipe the camera's settings and force it to go back into setup mode. During this process, the camera will reboot, and you will be able to access the battery compartment.

It is important to note that the camera should be powered off before you attempt to open it. If the camera is on, you can turn it off by pressing and holding the power button for a few seconds until it shuts down. Alternatively, you can remove the battery to turn it off.

Once the camera is powered off, you can proceed to open it. Using a screwdriver, carefully remove the screws that hold the camera casing together. Place the screws in a safe place so you don't lose them. Gently pry open the camera casing with a tool, such as a screwdriver or a spudger. Be careful not to damage the casing or any internal components.

Now that the camera is open, you should be able to see the battery inside. Proceed with caution as you don't want to disconnect or damage any wires or components accidentally. You may now remove the battery or perform any necessary maintenance or repairs. Remember to handle the battery with care and follow proper disposal guidelines if it is damaged or needs to be replaced.

Use the correct USB power adapter

To ensure your SimpliSafe Outdoor Camera's battery charges efficiently, it is important to use the correct USB power adapter. The camera requires a USB power adapter with an output of 5.0V, 1.5A+, and using an incorrect power adapter can result in the battery not charging completely.

The SimpliSafe camera comes with a compatible USB adapter (5V, 7.5W+, 1.5A+), but if you need to use an alternative, there are several options that meet the required output. These include the SimpliCam Wired Indoor Security Camera adapter, the Smart Alarm Wireless Indoor Security Camera adapter, and most iPhone (Apple) and Android adapters.

If you are unsure about the output of your power adapter, you can usually find this information printed on the device itself. When charging the camera's battery, make sure to plug the adapter directly into a wall outlet. Using a USB power strip or USB power hub may not provide sufficient power for charging.

It is worth noting that the battery charging time can be up to 6 hours, and you will know it is fully charged when all three lights on the battery are illuminated and no longer blinking.

Charge for 5-6 hours

To ensure your SimpliSafe Outdoor Camera's battery is charged for optimal performance, follow these steps:

First, it is recommended to fully charge the battery before beginning the installation process. The battery will take around 5-6 hours to charge fully. You can identify when the battery is fully charged by observing the lights on the battery. There will be three lights, and when all three are illuminated and no longer blinking, the battery is ready. During the charging process, you will see a blinking white light.

It is important to use the correct power adapter to ensure the battery charges effectively. The Outdoor Camera's battery requires a USB power adapter with a specific output of 5.0V and 1.5A or higher. Using an incorrect or incompatible adapter may result in incomplete charging.

Additionally, ensure that you are plugging the adapter directly into a wall outlet. Using a USB power strip or hub may not provide sufficient power for effective charging.

By following these instructions, you can ensure that your SimpliSafe Outdoor Camera's battery is fully charged and ready for use. A fully charged battery can last up to 3-6 months, depending on usage and settings.

Reposition the camera to avoid unnecessary motion detection

If your SimpliSafe Outdoor Camera is detecting too much motion, you can make some adjustments to its placement and settings to minimise the amount of motion it detects.

Firstly, consider the placement of your camera. If your camera is facing a high-traffic area, such as a busy street or sidewalk, try angling the camera down to remove this area from its field of view. The recommended mounting height is 6-8 feet from the ground, angled 30 degrees down. Face the camera towards entry and exit points on your property, such as your driveway or front walkway.

If you cannot adjust the angle of the camera, you can change its settings in the SimpliSafe Mobile App. By default, the camera's sensitivity is set to Medium, but you can adjust this setting to Low to limit the number of motion events you receive. To do this, open the SimpliSafe Mobile App, tap 'Cameras' on the navigation bar, select the gear icon in the top right corner to open Camera Settings, choose the camera you want to adjust, tap 'Motion Detection', and then under 'Sensitivity', move the slider to Low. Tap 'Save' to finalise this change.

You can also set up Activity Zones within the Camera Settings menu in the SimpliSafe App to focus on your property. Tap the zones that you don't want to receive alerts from, such as high-traffic roads or paths. To do this, open the SimpliSafe Mobile App, tap 'Cameras' on the navigation bar, select the gear icon to open Camera Settings, choose the camera you want to adjust, tap 'Motion Detection', and then under 'Activity Zone', tap the boxes in the frame where you do not want your camera to record. Tap 'Save' to save this change.

Frequently asked questions