Removing Backstand From Curved Monitors: A Step-By-Step Guide

Removing the backstand from a curved monitor can be done for various reasons, such as freeing up desk space or adjusting the monitor's height to improve viewing angles and reduce strain on your back, neck, and shoulders. The process of removing the stand can be straightforward, but it is important to exercise caution when handling electronic devices to avoid any damage. This introduction will provide a comprehensive guide on how to safely remove the backstand from a curved monitor, including the tools required, step-by-step instructions, and tips for alternative mounting options.

Unscrew the backstand with a Phillips-head screwdriver

To remove the backstand from a curved monitor, you will need a Phillips-head screwdriver. This type of screwdriver is designed to remove Phillips head screws, which have two grooves forming a cross. Before you begin, ensure that you have unplugged the monitor from the power outlet and any cables. This is important for your safety.

Now, locate the screws that secure the backstand to the monitor. These screws are typically located on the underside of the monitor, near the stand. Once you have located the screws, it's time to get to work.

Place the tip of your Phillips-head screwdriver into the longer groove of the screw. Gently apply pressure and turn the screwdriver counterclockwise to unscrew the screw. You may need to apply some force, but be careful not to strip the screw or damage the surrounding area. If the screw is very tight, you can try using a flathead screwdriver of the same length as the longer groove to gain more leverage.

Repeat this process for all the screws securing the backstand to the monitor. Once all the screws have been removed, you can carefully detach the backstand from the monitor. Be gentle and take your time to avoid damaging the monitor or the backstand.

Now that the backstand is removed, you can dispose of it or store it for future use. Remember to handle it with care, as it is made of plastic and can be easily damaged.

Detach the backstand from the monitor

To detach the backstand from your curved monitor, follow these steps:

First, ensure you have the necessary tools: a Phillips-head screwdriver and a flathead screwdriver. Unplug the monitor from the power outlet and any cables to ensure safety and avoid any potential damage or risk of electric shock.

Now, locate the screws that secure the stand to the monitor. These screws are typically found on the underside of the monitor, near the stand. Use the Phillips-head screwdriver to carefully remove these screws. Once the screws are removed, gently pry the stand from the monitor using the flathead screwdriver. You may need to apply a small amount of pressure, but be careful not to damage the monitor or the stand.

Once the stand is detached, you can dispose of it or store it safely for future use. Remember to handle it with care, as it is made of plastic and can be fragile.

By removing the stand, you can improve ergonomics, enhance your viewing experience, increase flexibility in terms of monitor placement, achieve a sleeker aesthetic, and improve ventilation for your curved monitor.

Unplug the power cord and cables

Before you begin the process of removing the backstand from your curved monitor, it is crucial to take some safety precautions. The first step is to unplug the power cord and any other cables connected to the monitor. This step is essential for two main reasons. Firstly, it eliminates the risk of electric shock, ensuring your safety during the removal process. Secondly, it prevents any potential damage to the monitor that could be caused by electrical surges or mishandling of cables.

When unplugging the power cord and cables, make sure you do so carefully and gently. Pull the cord and cables straight out from the power outlet and the monitor, avoiding any abrupt or forceful movements. This gentle approach reduces the risk of damaging the cables or the ports they are connected to. It is also advisable to label or make a note of which cable goes into which port, as this will make it easier for you when reconnecting the monitor.

Once you have unplugged the power cord and cables, set them aside in a safe place where they won't be accidentally knocked or pulled. Keep them away from any liquids or sources of heat to prevent damage. If the cables are long, consider coiling them neatly to avoid tangles and ensure they don't get in the way as you work on removing the backstand.

It is worth noting that different curved monitors may have varying numbers and types of cables, depending on the model and its connectivity options. For example, you may have HDMI, DisplayPort, USB, audio, or power cables, or a combination of these. Ensure you unplug all the cables connected to your monitor, following the same careful procedure for each one.

By taking the time to carefully unplug the power cord and cables, you are not only prioritising your safety but also reducing the chances of accidental damage to your curved monitor. This initial step sets the foundation for a smooth and successful removal process for the backstand.

Lift the monitor and place it face down

To lift and place your monitor, it is important to ensure you have a clear, flat surface to work on. This will ensure that you don't accidentally knock or bump the monitor, reducing the risk of damage or injury. Clear your workspace of any clutter and choose a sturdy table or desk that can accommodate the monitor's size and weight.

Before lifting the monitor, ensure it is unplugged and all cables are disconnected. This step is crucial for safety and will make it easier to manoeuvre the monitor. Once the cables are removed, gently lift the monitor from its current position, taking care to hold it securely but without applying excessive pressure to any one point.

As you lift, maintain a straight back and bend your knees if necessary to utilise your leg muscles and avoid straining your back. If the monitor is particularly large or heavy, consider using a helper or assistant to lift with you. Carefully place the monitor face down on the prepared flat surface. Ensure it is stable and won't roll or slide, as this could cause damage.

Now that the monitor is face down, you can proceed with the next steps to remove the backstand, which typically involve unscrewing and detaching the stand.

Remove screws attaching the monitor to the stand

Before you begin, ensure that you have the necessary tools and resources. You will need a Phillips-head screwdriver and a flathead screwdriver. You should also refer to the monitor's user manual to understand its components and how they are connected. If you do not have the user manual, you can usually find the model name and number on the front or back of the monitor. With this information, you can download the user manual from the internet.

Now, let's get into the process of removing the screws that attach the monitor to the stand:

• Unplug the monitor from the power outlet and disconnect all cables, including power cables and those connected to the PC. This will ensure your safety and make it easier to handle the monitor.
• Locate the screws that attach the stand to the monitor. These screws are typically located on the underside of the monitor, near the stand, or at the back of the monitor, near the bottom.
• Using the appropriate screwdriver, usually a Phillips-head screwdriver, carefully remove the screws. Place them aside in a safe place to avoid losing them.
• In some cases, you may need to apply gentle pressure to pry the stand from the monitor using a flathead screwdriver. Be careful not to apply too much force, as you don't want to damage the monitor or the stand.
• Once the screws have been removed and the stand has been detached, you can lift the monitor and place it face down on a flat, stable surface. Make sure to cover the table with a soft cloth to protect the monitor's screen from scratches.
• If you encounter any difficulties or if the stand seems to be connected in a different way, refer to the user manual for specific instructions for your monitor model.

By following these steps, you should be able to successfully remove the screws attaching the monitor to the stand. Remember to handle the monitor and stand with care to avoid any damage.

Frequently asked questions